Quote Originally Posted by rntrary View Post
I got it to work with following variation in video d6Cw.
After select 46, goto chan 01
click on the displayed chan 01 and read becomes highlighted
click on highlighted read
enter new value (2)
test, save and are you sure
then click lock button on each remote
tadah it works !

perhaps the d6Cw video needs to be updated
I'm not sure what the difference here is, except that you apparently didn't use the [Up] button form channel 0. Using the [Up] (or [Dn]) button causes VCDS to do the Read automatically. If you go to a channel by typing its channel number, or selecting it from the drop-down list, than you must click [Read].

-Uwe-