Page 3 of 3 FirstFirst 123
Results 21 to 25 of 25

Thread: RETROFIT MEMORY SEATS PASSAT B8

  1. #21
    Verified VCDS User sam1754's Avatar
    Join Date
    Mar 2019
    Location
    France
    Posts
    157
    Post Thanks / Like
    The new seats are ready with airbag units in backrests. All is ready but I still have to wire confort can bus from driver'seat coupling point to convenience point on A pillar (soldering on door harness) and powering passenger seat. I have bought wires with right colors but I didn't manage to find the right male pins to put in connectors.
    Anybody know how to find which type of pin fit in those connectors, please?

  2. #22
    Verified VCDS User
    Join Date
    Apr 2018
    Location
    ITALY
    Posts
    669
    Post Thanks / Like
    I can find out for sure if you give me the connector part number...
    my Golf came out of the factory with 13 ECUs. now she has 20. and counting

  3. Likes sam1754 liked this post
  4. #23
    Verified VCDS User sam1754's Avatar
    Join Date
    Mar 2019
    Location
    France
    Posts
    157
    Post Thanks / Like
    GREAT!!!
    I need one pin for 4F0937733 --> there is 4 large and 6 small pins. I need a large one to plug electric control for passenger seat adjustement.
    And two small ones for 4F0937743 to plug confort CANBUS wires.
    Many thanks for your reply!

  5. #24
    Verified VCDS User
    Join Date
    Apr 2018
    Location
    ITALY
    Posts
    669
    Post Thanks / Like
    for 4F0 937 733, get 000 979 242 E at the dealer, or Tyco 968851-1
    for 4F0 937 743, get 000 979 020 E at the dealer, or Tyco 963898-1
    my Golf came out of the factory with 13 ECUs. now she has 20. and counting

  6. Likes Uwe, sam1754 liked this post
  7. #25
    Verified VCDS User sam1754's Avatar
    Join Date
    Mar 2019
    Location
    France
    Posts
    157
    Post Thanks / Like
    Great!
    I come back from VW's dealer and they just sell repair kit with wire.
    I bought N 103 190 05 pins for 2,5mm2
    and N 103 360 05 pins for 0,5mm2
    Hope it'll come soon... from China

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •