Page 4 of 4 FirstFirst ... 234
Results 31 to 35 of 35

Thread: Project retrofit from MK100 5Q0 ABS to newer MK100 3Q0 ABS

  1. #31
    Verified VCDS User
    Join Date
    May 2017
    Location
    Finland
    Posts
    1,523
    Post Thanks / Like
    I have the same ABS but the old round faced radar.

  2. #32
    Verified VCDS User
    Join Date
    Dec 2019
    Location
    de
    Posts
    19
    Post Thanks / Like
    Ok if you have That Same ABS and coding. Than i am sure That awv work in Situation.

  3. #33
    Verified VCDS User
    Join Date
    May 2017
    Location
    Finland
    Posts
    1,523
    Post Thanks / Like
    Only difference in coding is the byte 29 bit 6 is enabled in your coding and disabled in mine. It’s labeled in the unofficial label file as ESP36. I have no idea what it means.

  4. Likes Sebstar liked this post
  5. #34
    Verified VCDS User
    Join Date
    Dec 2019
    Location
    de
    Posts
    19
    Post Thanks / Like
    I turnt Bit 6 now off.

    I try the next time with A8 in Byte 29. For now it work.

    Is These Label file for Vcds? Can i use These dicekt during coding? And how to get it?
    Last edited by Sebstar; 01-02-2020 at 03:08 AM.

  6. #35
    Verified VCDS User
    Join Date
    May 2017
    Location
    Finland
    Posts
    1,523
    Post Thanks / Like
    Google for : ABS_3Q0-907-379-AB--IPB-beta_v1.1.lbl

    And reminder, this is unofficial label file. It will help you on few of the last bytes but everything else is more or less useless.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •