Results 1 to 4 of 4

Thread: OBD2 on Volvos

  1. #1
    Verified VCDS User
    Join Date
    Dec 2019
    Location
    USA
    Posts
    2
    Post Thanks / Like

    OBD2 on Volvos

    Seems my new HEX-NET is not finding the ISO 9141-2 Address 33, however, will see vehicles with the ISO 15765-500-29bit easily. The problem is with earlier CAN around 2005. We use this software due to the splendid display on the PIDs (Gauge mode).
    Earlier HEX-CAN cabled interface works fine if that helps any. Thank you for your help.

  2. Likes Uwe liked this post
  3. #2
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    27,837
    Post Thanks / Like
    Blog Entries
    1
    Gonna move this to HEX-NET support where Shaun is more likely to see it when our office is open again late next week.

    -Uwe-
    Lock-down of sick people: Quarantine
    Lock-down of healthy people: Tyranny

  4. #3
    Ross-Tech Employee
    Join Date
    Jan 2014
    Location
    USA
    Posts
    918
    Post Thanks / Like
    Can you make a debug log of the OBDII init with the HEX-NET? Enter debug level 1048 on the options screen in VCDS and then do the init. Debug logs should be generated in the Debug folder in the VCDS directory. Email those to us.

  5. Likes Uwe liked this post
  6. #4
    Verified VCDS User
    Join Date
    Dec 2019
    Location
    USA
    Posts
    2
    Post Thanks / Like
    will do, may take a week or more for different year models coming into our shop

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •