VW Crafter VCDS Auto Scan Issues

   #1  

Lightboy

Verified VCDS User
Verified
Joined
Dec 17, 2019
Messages
16
Reaction score
1
Location
UK
VCDS Serial number
C?ID=382313
Hey, so i know my Crafter wont read fully but what it does read is a little hit and miss.
Meaning sometimes it reads other times it does not and the auto scan has failed to
read some massive codes.

I, like other users have also had to switch the ignition off and on in order to connect to a
module which is a a rather painful work around every time i do anything.

Anyway, here are 2 auto scans and a fault log in a module.

Both auto scans fail to read the codes, only when i go into the module can i read the codes.

------------------------- AUTO SCAN 01 ------------------------------------------------

Code:
Friday,20,December,2019,11:55:25:64379
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64
VCDS Version: 19.6.2.0 (x64)  HEX-V2 CB: 0.4508.4
Data version: 20190930 DS308.0
www.Ross-Tech.com


VIN: WV1ZZZ2EZB6*******   License Plate: 


Chassis Type: 2E (2E - VW Crafter Panel Van (LT3 / 2006 > 2016))
Scan: 01 91 92 93 94 95 96 97 98 99 9A 9B 9C 9D 9E 9F A0 A1 A2 A3
          B0 B1 B2 B3 B4 B5 B6 C1
 
VIN: WV1ZZZ2EZB6******  
-------------------------------------------------------------------------------
Address 91: LT3 Engine        Labels: Redir Fail!
   Part No SW: 076 906 022 P    HW: 076 906 022 G
   Component: R5 2,5L EDC A0A0SG  7730  
   Coding: 0003032
   Shop #: WSC 80093 222 71269
   VCID: 2019E796C6CC54B7E97-8074

No Faults Found
  or DTCs not supported by controller
  or a communication error occurred

-------------------------------------------------------------------------------
Address 93: LT3 Immo        Labels: 2E0-905-865-93.clb
   Part No SW: 2E0 905 865 AD    HW: 906 545 580 8
   Component: IMMO          0805  0815  
   Revision: 00805000    Serial number: VWXDZ0J1023775
   Shop #: WSC 00000 000 00000
   VCID: 6D87CEA2419E49DF121-8038

No fault code found.

-------------------------------------------------------------------------------
Address 94: LT3 Airbag 
   Part No HW: 9064461442
   Shop #: WSC 00117 555 00000
   ASAM Dataset: 3 3332
   ROD: CRFT_AB_3_3331.rod (*)
   VCID: 55F78642C58EE11FCA1-8000

No fault code found.

-------------------------------------------------------------------------------
Address 95: LT3 ESP 
   Part No SW: 9069022800    HW: 0004460153
   Shop #: WSC 00117 555 00000
   ASAM Dataset: 3 4101
   ROD: CRFT_ESP_3_36946.rod (*)
   VCID: 04518B067E94A897EDF-8050

No fault code found.

-------------------------------------------------------------------------------
Address 96: LT3 Instruments 
   Part No SW: 9069026400    HW: 9069012000
   Shop #: WSC 00000 000 00000
   ASAM Dataset: 32 787
   ROD: CRFT_KOMBI_32_787.rod
   VCID: 04518B067E94A897EDF-8050

No fault code found.

-------------------------------------------------------------------------------
Address 9A: LT3 Central Locks        Labels: 2E0-905-865-9A.clb
   Part No SW: 2E0 905 865 AD    HW: 906 545 580 8
   Component: HF-FFB        0805  0815  
   Revision: 00805000    Serial number: 12345678901234
   Shop #: WSC 00000 000 00000
   VCID: 6D87CEA2419E49DF121-8038

No fault code found.

-------------------------------------------------------------------------------
Address 9B: LT3 Driver Door 
   Part No HW: 9068204126
   Shop #: WSC 00000 000 00000
   ASAM Dataset: 33 773
   ROD: CRFT_FTUHR_33_773.rod (*)
   VCID: 55F78642C58EE11FCA1-8000

No fault code found.

-------------------------------------------------------------------------------
Address B0: LT3 Roof Display 
   Part No SW: 9069021000    HW: 9069010900
   Shop #: WSC 00000 000 00000
   ASAM Dataset: 21 3
   ROD: CRFT_DBE_21_3.rod (*)
   VCID: 7BA3F0FA036AD76F9C5-802E

1 Fault Found:
909C - Alarm Horn (H12): No or incorrect basic setting 
            Test Complete - Active/Stored

-------------------------------------------------------------------------------
Address B4: LT3 Central Elec. 
   Part No SW: 9064420700    HW: 9065453801
   Shop #: WSC 00000 000 00000
   ASAM Dataset: 33 772
   ROD: CRFT_EZE_33_772.rod (*)
   VCID: 55F78642C58EE11FCA1-8000

1 Fault Found:
90A1 - Engine Coolant Level (ECL) Sensor (G32): Short to Plus 
            Test Complete - Active/Stored

-------------------------------------------------------------------------------
Address B6: LT3 Steering Wheel 
   Part No SW: 9065402345    HW: 9065402345
   Shop #: WSC 00000 000 00000
   ASAM Dataset: 72 257
   ROD: CRFT_SML_72_257.rod (*)
   VCID: 0655910E48A89A87F3B-8052

No fault code found.

End----------(Elapsed Time: 01:34, VBatt start/end: 12.6V/12.6V)-----------



------------------------- AUTO SCAN 02 ------------------------------------------------

Code:
Friday,20,December,2019,12:31:07:64379
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64
VCDS Version: 19.6.2.0 (x64)  HEX-V2 CB: 0.4508.4
Data version: 20190930 DS308.0
www.Ross-Tech.com


VIN: WV1ZZZ2EZB6******   License Plate: 



--------------------------------------------------------------------------------
--------------------------------------------------------------------------------


Chassis Type: 2E (2E - VW Crafter Panel Van (LT3 / 2006 > 2016))
Scan: 01 91 92 93 94 95 96 97 98 99 9A 9B 9C 9D 9E 9F A0 A1 A2 A3
          B0 B1 B2 B3 B4 B5 B6 C1
 
VIN: WV1ZZZ2EZB6******  
-------------------------------------------------------------------------------
Address 91: LT3 Engine        Labels: 
   VCID: 55F78642CC0EE11FCA1-FFFE


-------------------------------------------------------------------------------
Address 93: LT3 Immo        Labels: 2E0-905-865-93.clb
   Part No SW: 2E0 905 865 AD    HW: 906 545 580 8
   Component: IMMO          0805  0815  
   Revision: 00805000    Serial number: VWXDZ0J1023775
   Shop #: WSC 00000 000 00000
   VCID: 6D87CEA2419E49DF121-8038

No fault code found.

-------------------------------------------------------------------------------
Address 94: LT3 Airbag 
   Part No HW: 9064461442
   Shop #: WSC 00117 555 00000
   ASAM Dataset: 3 3332
   ROD: CRFT_AB_3_3331.rod (*)
   VCID: 55F78642C58EE11FCA1-8000

No fault code found.

-------------------------------------------------------------------------------
Address 95: LT3 ESP 
   Part No SW: 9069022800    HW: 0004460153
   Shop #: WSC 00117 555 00000
   ASAM Dataset: 3 4101
   ROD: CRFT_ESP_3_36946.rod (*)
   VCID: 04518B067E94A897EDF-8050

No fault code found.

-------------------------------------------------------------------------------
Address 96: LT3 Instruments 
   Part No SW: 9069026400    HW: 9069012000
   Shop #: WSC 00000 000 00000
   ASAM Dataset: 32 787
   ROD: CRFT_KOMBI_32_787.rod
   VCID: 04518B067E94A897EDF-8050

No fault code found.

-------------------------------------------------------------------------------
Address 99: LT3 Ign. Switch 
   Part No HW: 9065455808
   Shop #: WSC 00000 000 00000
   ASAM Dataset: 67 257
   ROD: CRFT_EZS_67_257.rod (*)
   VCID: 55F78642C58EE11FCA1-8000

No fault code found.

-------------------------------------------------------------------------------
Address 9A: LT3 Central Locks        Labels: 2E0-905-865-9A.clb
   Part No SW: 2E0 905 865 AD    HW: 906 545 580 8
   Component: HF-FFB        0805  0815  
   Revision: 00805000    Serial number: 12345678901234
   Shop #: WSC 00000 000 00000
   VCID: 6D87CEA2419E49DF121-8038

No fault code found.

-------------------------------------------------------------------------------
Address 9B: LT3 Driver Door 
   Part No HW: 9068204126
   Shop #: WSC 00000 000 00000
   ASAM Dataset: 33 773
   ROD: CRFT_FTUHR_33_773.rod (*)
   VCID: 55F78642C58EE11FCA1-8000

No fault code found.

-------------------------------------------------------------------------------
Address B0: LT3 Roof Display 
   Part No SW: 9069021000    HW: 9069010900
   Shop #: WSC 00000 000 00000
   ASAM Dataset: 21 3
   ROD: CRFT_DBE_21_3.rod (*)
   VCID: 7BA3F0FA036AD76F9C5-802E

1 Fault Found:
909C - Alarm Horn (H12): No or incorrect basic setting 
            Test Complete - Active/Stored

-------------------------------------------------------------------------------
Address B4: LT3 Central Elec. 
   Part No SW: 9064420700    HW: 9065453801
   Shop #: WSC 00000 000 00000
   ASAM Dataset: 33 772
   ROD: CRFT_EZE_33_772.rod (*)
   VCID: 55F78642C58EE11FCA1-8000

1 Fault Found:
90A1 - Engine Coolant Level (ECL) Sensor (G32): Short to Plus 
            Test Complete - Active/Stored

-------------------------------------------------------------------------------
Address B6: LT3 Steering Wheel 
   Part No SW: 9065402345    HW: 9065402345
   Shop #: WSC 00000 000 00000
   ASAM Dataset: 72 257
   ROD: CRFT_SML_72_257.rod (*)
   VCID: 0655910E48A89A87F3B-8052

No fault code found.

End----------(Elapsed Time: 01:33, VBatt start/end: 12.5V/12.5V)-----------


------------------------------------MODULE FAULT LOG -------------------------------------

FYI - Many Codes here are due to lots of things not being connected, which i am guessing should have been read by the Auto Scan?


Code:
Friday,20,December,2019,12:33:02:64379
VCDS Version: Release 19.6.2 (x64) Running on Windows 10 x64
www.Ross-Tech.com

                Address 91: LT3 Engine       Labels: Redir Fail!
Control Module Part Number: 076 906 022 P    HW: 076 906 022 G
  Component and/or Version: R5 2,5L EDC A0A0SG  7730
           Software Coding: 0003032
            Work Shop Code: WSC 80093 222 71269
                      VCID: 2019E796C6CC54B7E97-8074
10 Faults Found:

000261 - Manifold / Barometric Pressure Sensor (G71) / (F96) 
               P0105 - 001 - Malfunction
             Freeze Frame:
                    Fault Status: 01100001
                    Fault Priority: 2
                    Fault Frequency: 3
                    Reset counter: 255
                    Time Indication: 0

             Freeze Frame:
                    RPM: 0 /min
                    Speed: 0.0 km/h
                    Load: 0.0 %
                    Voltage: 12.62 V
                    Torque: 90.0 Nm
                    Temperature: 49.5°C
                    Bin. Bits: 00010000

008235 - Control Circuit for Reductant Tank Heating 
               P202B - 000 - Short to GND - MIL ON
             Freeze Frame:
                    Fault Status: 11100000
                    Fault Priority: 2
                    Fault Frequency: 1
                    Reset counter: 255
                    Time Indication: 0

             Freeze Frame:
                    RPM: 0 /min
                    Speed: 0.0 km/h
                    Voltage: 12.31 V
                    Temperature: 6.3°C
                    Temperature: 7.2°C
                    Voltage: 0.750 V
                    Voltage: 0.000 V

009304 - Diesel Particulate Filter 
               P2458 - 000 - Regeneration Duration - MIL ON
             Freeze Frame:
                    Fault Status: 11100000
                    Fault Priority: 2
                    Fault Frequency: 1
                    Reset counter: 255
                    Time Indication: 0

             Freeze Frame:
                    RPM: 735 /min
                    Speed: 0.0 km/h
                    Pressure: 5 mbar
                    Hex Value: 0xFF00
                    Temperature: 78.0°C
                    (no units): 25.5
                    Mileage: 270 km

005762 - Powertrain Data Bus 
               P1682 - 000 - Implausible Message from ABS Controller - Intermittent
             Freeze Frame:
                    Fault Status: 00100000
                    Fault Priority: 6
                    Fault Frequency: 1
                    Reset counter: 255
                    Time Indication: 0

             Freeze Frame:
                    RPM: 0 /min
                    Speed: 0.0 km/h
                    Load: 0.0 %
                    Voltage: 12.69 V
                    Torque: 90.0 Nm
                    Temperature: 43.2°C
                    Bin. Bits: 00010000

001674 - ECM Power Relay Load Circuit 
               P068A - 000 - Opens Too Early
             Freeze Frame:
                    Fault Status: 01100000
                    Fault Priority: 2
                    Fault Frequency: 1
                    Reset counter: 255
                    Mileage: 0 km
                    Time Indication: 0

             Freeze Frame:
                    RPM: 0 /min
                    Speed: 0.0 km/h
                    Load: 0.0 %
                    Voltage: 0.00 V
                    Hex Value: 0xFF00
                    Bin. Bits: 00000000
                    Temperature: -90.0°C

000291 - Throttle Position Sensor (G69) 
               P0123 - 000 - Signal too High - MIL ON
             Freeze Frame:
                    Fault Status: 11100000
                    Fault Priority: 2
                    Fault Frequency: 1
                    Reset counter: 255
                    Time Indication: 0

             Freeze Frame:
                    RPM: 0 /min
                    Speed: 0.0 km/h
                    Voltage: 11.86 V
                    Lambda: 99.4 %
                    Lambda: -0.8 %
                    Bin. Bits: 00000000
                    Voltage: 5.016 V

001029 - EGR Sensor 1 
               P0405 - 000 - Signal too Low
             Freeze Frame:
                    Fault Status: 01100000
                    Fault Priority: 2
                    Fault Frequency: 1
                    Reset counter: 255
                    Time Indication: 0

             Freeze Frame:
                    RPM: 0 /min
                    Speed: 0.0 km/h
                    Voltage: 11.86 V
                    Lambda: 99.4 %
                    Lambda: -3.9 %
                    Bin. Bits: 00000000
                    Voltage: 0.000 V

008448 - Throttle Actuator Control Circuit 
               P2100 - 000 - Open Circuit - MIL ON
             Freeze Frame:
                    Fault Status: 11100000
                    Fault Priority: 2
                    Fault Frequency: 1
                    Reset counter: 255
                    Time Indication: 0

             Freeze Frame:
                    RPM: 0 /min
                    Speed: 0.0 km/h
                    Load: 0.0 %
                    Load: 100.0 %
                    Lambda: 99.4 %
                    Mass Air / Rev.: 0.0 mg/str
                    Temperature: 8.1°C

005184 - EGR Valve (N18) 
               P1440 - 000 - Open Circuit
             Freeze Frame:
                    Fault Status: 01100000
                    Fault Priority: 2
                    Fault Frequency: 1
                    Reset counter: 255
                    Time Indication: 0

             Freeze Frame:
                    RPM: 0 /min
                    Speed: 0.0 km/h
                    Load: 0.0 %
                    Load: 100.0 %
                    Lambda: 99.4 %
                    Mass Air / Rev.: 0.0 mg/str
                    Temperature: 8.1°C

004374 - Oxygen (Lambda) Sensor Heating; B1 S1 
               P1116 - 000 - Open Circuit
             Freeze Frame:
                    Fault Status: 01100000
                    Fault Priority: 2
                    Fault Frequency: 1
                    Reset counter: 255
                    Time Indication: 0

             Freeze Frame:
                    RPM: 0 /min
                    Speed: 0.0 km/h
                    Lambda: 1.6 %
                    Mass Air / Rev.: 0.0 mg/str
                    Voltage: 0.000 V
                    (no units): 0.15
                    Voltage: 3.300 V

--------------------------------------------------------------------------------------------------------

Please help as am wondering if i would have been better spending the £200 on booze instead
of this VCDS system as at least it would have made me feel better.
 
Last edited by a moderator:
   #2  

Uwe

Benevolent Dictator
Administrator
Joined
Jan 29, 2014
Messages
48,925
Reaction score
33,652
Location
USA
VCDS Serial number
HC100001
That generation of Crafter has been a bugger for us. They're a mix of VAG and MBZ parts, and even the VAG parts don't always behave "normally". It's complicated by the fact that we can't just get a hold of one to beat things into submission because they simply don't exist on this side of the pond.

Anyway, the
Code:
No Faults Found
  or DTCs not supported by controller
  or a communication error occurred
and the lack of any detail regarding the ECU are in the second scan are a definite clue to that you should dig deeper, and directly accessing the ECU as you did in the third section above is a good way to do that.

-Uwe-
 
Back
Top