Page 1 of 3 123 LastLast
Results 1 to 10 of 25

Thread: Golf 6 r inner brake led lights coding

  1. #1
    Verified VCDS User
    Join Date
    Nov 2017
    Location
    Croatia
    Posts
    79
    Post Thanks / Like

    Golf 6 r inner brake led lights coding

    Hello i want to try coding rear led inner lights on boot. I have tool for that bit i see on forum i must change byte 18 on bcm to "00" first. I save my coding first. Is it possible some trouble if i change value now is 04 to 00
    Thanks

  2. #2
    Verified VCDS User
    Join Date
    Jan 2015
    Location
    Bosnia and Herzegovina
    Posts
    544
    Post Thanks / Like
    there is no problem since your byte 18 is known 04, problem is when byte 18 is 00 (it newer is a 00, 00 is just a mask, true value is hidden)
    There are 3 kind of services
    GOOD CHEAP FAST
    But you can only choose 2:
    GOOD and CHEAP won't be FAST
    FAST and GOOD won't be CHEAP
    CHEAP and FAST won't be GOOD

  3. #3
    Verified VCDS User
    Join Date
    Nov 2017
    Location
    Croatia
    Posts
    79
    Post Thanks / Like
    I must put 00 than change with tool eeprome and when i finished again put 04 is it correct

  4. #4
    Verified VCDS User
    Join Date
    Nov 2017
    Location
    Croatia
    Posts
    79
    Post Thanks / Like

  5. #5
    Verified VCDS User
    Join Date
    May 2016
    Location
    Netherlands
    Posts
    125
    Post Thanks / Like
    No modify and no back to 04

  6. #6
    Verified VCDS User
    Join Date
    Nov 2017
    Location
    Croatia
    Posts
    79
    Post Thanks / Like
    Ok better dont change anything

  7. #7
    Verified VCDS User
    Join Date
    Nov 2017
    Location
    Croatia
    Posts
    79
    Post Thanks / Like
    Vastechnics do you tell me if i change something in eeprome no posible back to 04

  8. #8
    Verified VCDS User
    Join Date
    Nov 2017
    Location
    Croatia
    Posts
    79
    Post Thanks / Like
    I am scared to change byte 18 because if not possible back to 04 coding

  9. #9
    Verified VCDS User
    Join Date
    Mar 2019
    Location
    Poland
    Posts
    28
    Post Thanks / Like

  10. #10
    Verified VCDS User
    Join Date
    Nov 2017
    Location
    Croatia
    Posts
    79
    Post Thanks / Like
    Thanks for reply I see allready this but some guys on forum tell me dont change anything in byte 18

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •