1.8l engine security access (HELP)

   #1  

Tutu22

Verified VCDS User
Verified
Joined
Dec 10, 2019
Messages
8
Reaction score
0
Location
India
VCDS Serial number
C?ID=161648 (NRRT)
Hi,
Need Security Access for the below ECM.


Thursday,12,December,2019,17:37:39:04642
VCDS Version: Release 19.6.2
Address 01: Engine
Control Module Part Number: 6C0 906 264
Component and/or Version: 1.8l R4 TFSI H13 0003
Software Coding: 092500322424010B0000
Work Shop Code: WSC 00788
VCID: 64CDED266F499D6F23-8030

Advanced Identification/FAZIT
Identification: SJ8-FST
Revision: --H13---
Date: 27.08.16
Manufacturer number: 1132
Test stand number: 0223
Flash Status
Programming Attempts(application): 3/3/1/2/3
Successful Attempts(application): 3/3/1/2/2
Programming Status: 00000000
Flash Date: 00.00.00
Software
HiSpd Net: 01.12.01
Misc.
Hardware number: 06K 907 425 B
Workshop System Name: J623
ASAM Dataset: EV_ECM18TFS0206C0906264
ASAM Dataset Revision: 001004
Car Info
Chassis Number: WVWK166RZHY094216
Engine code: DAJB
VCDS Info:
VCID: 64CDED266F499D6F23-8030
Labels: 06K-907-425-V1.clb
Readiness: No script available
ROD: EV_ECM18TFS0206C0906264.rod


Regards,
Tutu.
 
   #2  

Uwe

Benevolent Dictator
Administrator
Joined
Jan 29, 2014
Messages
48,925
Reaction score
33,653
Location
USA
VCDS Serial number
HC100001
What are you trying to accomplish?

Most ECUs have several different security access codes for different purposes. Very few are known.

-Uwe-
 
   #3  

Tutu22

Verified VCDS User
Verified
Joined
Dec 10, 2019
Messages
8
Reaction score
0
Location
India
VCDS Serial number
C?ID=161648 (NRRT)
Hi,

I have upgraded the gearbox from DQ200 7speed to DQ250 6speed, need to change the long coding in the engine ECM .

Long coding bit 02 from 00 to 1D- that selects 6 speed transmission.

Regards,
Tutu.
 
   #4  

Uwe

Benevolent Dictator
Administrator
Joined
Jan 29, 2014
Messages
48,925
Reaction score
33,653
Location
USA
VCDS Serial number
HC100001
Hi,

I have upgraded the gearbox from DQ200 7speed to DQ250 6speed, need to change the long coding in the engine ECM .

Long coding bit 02 from 00 to 1D- that selects 6 speed transmission.
Check parts catalog for your specific ECU software part number. Was it ever sold with a DQ250 6 speed transmission? Because if not, chances are it doesn't support that transmission, and the the fact that there's a coding configuration for such a transmission is not relevant.

-Uwe-
 
   #5  

Tutu22

Verified VCDS User
Verified
Joined
Dec 10, 2019
Messages
8
Reaction score
0
Location
India
VCDS Serial number
C?ID=161648 (NRRT)
Hi Uwe,

Got the Security Access - 27971

Regards,
Tutu.
 
   #6  

NEtech

VCDS Distributor
VCDS Distributor
Joined
Feb 7, 2014
Messages
3,519
Reaction score
5,643
Location
Denmark
VCDS Serial number
C?ID=56995
I have upgraded the gearbox from DQ200 7speed to DQ250 6speed, need to change the long coding in the engine ECM .
Long coding bit 02 from 00 to 1D- that selects 6 speed transmission.
You probably mean, Byte 1, change coding from 25 to 1D.

Got the Security Access - 27971
And that is accepted ?
And if should be, you can now change the above coding ?

I have not seen any Polo with this engine, use 6-speed DSG.
 
  • Like
Reactions: Uwe
   #7  

Tutu22

Verified VCDS User
Verified
Joined
Dec 10, 2019
Messages
8
Reaction score
0
Location
India
VCDS Serial number
C?ID=161648 (NRRT)
Hi,

You probably mean, Byte 1, change coding from 25 to 1D.th

Yes u are correct, this engine can for india only I think.

Regards,
Tutu.
 
Back
Top