cu52
Active Member
- Joined
- Dec 10, 2019
- Messages
- 15
- Reaction score
- 4
- Location
- USA
- VCDS Serial number
- HC473845 (2nd hand?)
Personally, I would try isolating K2 at the OBD-II socket rather than trying to do it one module at a time.
-Uwe-
Uwe!! Pulling pin 15 from the OBD2 worked. Connected and coded. Now I have the 01486 - System Function Test Active. (Still have ABS and BRAKE / traction lights on) Ill go do that once it is not snowing. Thanks for the help so far!
From what I can tell, based on 15 unplugged and 15 plugged back in I found the below. No change in Radio or Nav being unplugged, so thinking not the module. More to research.
K1 =
01 engine
03 ABS
15 Airbags
17 instruments
34 level control
75 telematics
K2 =
08 HVAC
17 Instruments
35 Centr. Locks
36 Seat Mem
37 NAV - Comm errors
55 Headlights
56 Radio
76 Park Assist
Last edited: