Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: 2016 Audi A3 Saloon - Backup/Rear Camera Retrofit

  1. #1
    Verified VCDS User
    Join Date
    Oct 2018
    Location
    UK
    Posts
    9
    Post Thanks / Like

    2016 Audi A3 Saloon - Backup/Rear Camera Retrofit

    Hi I am trying to install a backup camera to the car.

    I have wired it directly into the MMI and the car recognises that the camera is attached.

    The cables I was given and have connected

    Can Bus High - Entertainment
    Can Bus Low - Entertainment
    Black Wire from Camera into Blue connector in MMI #6
    White Wire from Camera into Blue connector in MMI #12
    7.5A Power Supply
    Earth Connection


    However I am unable to get the camera to appear on the screen when I select reverse gear.

    Under Info Elect I have changed the following

    - BAP-VPS_0x0B to activated
    - BAP-VPS_ox0B_msg_bus to Comfort Data Bus


    I have looked online and some people are using a reversing camera system control unit but the cables I was given go directly into the MMI?

    Confused!

    Can anyone help me with this?

    Thanks

    Luke

    Code:
    Tuesday,10,December,2019,21:26:54:11660
    VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64
    VCDS Version: 19.6.2.0 (x64)
    Data version: 20190930 DS308.0
    www.Ross-Tech.com
    
    
    VIN: WAUZZZ8V1H1004756   License Plate: 
    Mileage: 34521km-21450mi   Repair Order: 
    
    
    
    --------------------------------------------------------------------------------
    --------------------------------------------------------------------------------
    
    
    Chassis Type: 8V-AU37 (5Q0)
    Scan: 01 03 08 09 15 16 17 19 42 44 52 55 5F 6C BB BC
    
    VIN: WAUZZZ8V1H1004756   Mileage: 34521km-21450miles
    
    01-Engine -- Status: OK 0000
    03-ABS Brakes -- Status: OK 0000
    08-Auto HVAC -- Status: OK 0000
    09-Cent. Elect. -- Status: OK 0000
    15-Airbags -- Status: OK 0000
    16-Steering wheel -- Status: OK 0000
    17-Instruments -- Status: Malfunction 0010
    19-CAN Gateway -- Status: Malfunction 0010
    42-Door Elect, Driver -- Status: OK 0000
    44-Steering Assist -- Status: OK 0000
    52-Door Elect, Pass. -- Status: Malfunction 0010
    55-Headlight Range -- Status: OK 0000
    5F-Information Electr. -- Status: OK 0000
    6C-Back-up Cam. -- Status: Malfunction 0010
    BB-Door Rear Drv -- Status: OK 0000
    BC-Door Rear Pass -- Status: OK 0000
     
    -------------------------------------------------------------------------------
    Address 01: Engine (J623-CRLB)       Labels:. 04L-907-309-V1.clb
       Part No SW: 04L 906 026 BN    HW: 04L 907 309 R
       Component: R4 2,0L EDC   H23 1197  
       Revision: B5H23---    
       Coding: 02190012032501082000
       Shop #: WSC 06385 790 00016
       ASAM Dataset: EV_ECM20TDI01104L906026BN 002002
       ROD: EV_ECM20TDI01104L906026BN_002.rod
       VCID: 77FD8582CEE0C8F796-8022
    
    1 Fault Found:
    17161 - Databus 
              U1123 00 [032] - Received Error Message
              Intermittent - Not Confirmed - Tested Since Memory Clear
    
    Readiness: 0 0 0 0 0 
    
    -------------------------------------------------------------------------------
    Address 03: ABS Brakes (J104)       Labels: 5Q0-907-379-IPB-V1.clb
       Part No SW: 5Q0 614 517 BJ    HW: 5Q0 614 517 AG
       Component: ESC           H62 0636  
       Revision: 00000000    Serial number: 61646000002924
       Coding: 13F18AA224200A70497E0E0541C929C8512450927082947202610078800802
       Shop #: WSC 06385 790 00016
       ASAM Dataset: EV_Brake1UDSContiMK100IPB 035019
       ROD: EV_Brake1UDSContiMK100IPB_035_VW37.rod
       VCID: 7AFB9CB6FDF2D59FE9-802E
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 08: Auto HVAC (E87)       Labels:| 8V0-820-043.clb
       Part No SW: 8V0 820 043 M    HW: 8V0 820 043 M
       Component: AC Automat    H03 0110  
       Revision: 20001000    Serial number: 00000000966728
       Coding: 03100104002000011000000000001100
       Shop #: WSC 06385 790 00016
       ASAM Dataset: EV_AirCondiFrontVaAU37X 008021
       ROD: EV_AirCondiFrontVaAU37X.rod
       VCID: 3C775AAEB7462BAFBB-8068
    
       Relative humidity sensor in fresh air intake duct: 
       Subsystem 1 - Part No SW: 4H0 907 658 B    HW: 4H0 907 658 B
       Component: AQ_Hum_Sensor  H01 0005 
       Serial number: 7178453800PAG0MUFU03
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 09: Cent. Elect. (J519)       Labels:. 5Q0-937-08X-V2.clb
       Part No SW: 5Q0 937 084 CF    HW: 5Q0 937 084 CF
       Component: BCM MQBAB M+  H34 0236  
       Serial number: 02001617001057
       Coding: 000000000000000000000000000000000000000000000000000000000000
       Shop #: WSC 06385 790 00016
       ASAM Dataset: EV_BCMMQB 017001
       ROD: EV_BCMBOSCH_017.rod
       VCID: 7EF390A6E1DAF9BFD5-802A
    
       Control Unit For Wiper Motor: 
       Subsystem 1 - Part No SW: 8V2 955 119 C    HW: 8V2 955 119 A  Labels: 5QX-955-119-V1.CLB
       Component: WWS371 160529  043 0585 
       Serial number:         160616075711
       Coding: 0A47F7
    
       Rain Light Recognition Sensor: 
       Subsystem 2 - Part No SW: 8U0 955 559 C    HW: 8U0 955 559 B  Labels: 8U0-955-559.CLB
       Component: G397_RLFS  H06 0004 
       Serial number: 61934651            
       Coding: 00006C
    
       Light switch: 
       Subsystem 3 - Part No SW: 8V0 941 531 AR    HW: 8V0 941 531 AR
       Component: E1 - LDS MQB  H05 0032 
       Serial number: 22 04 2016  00000038
    
       Sensor For Anti Theft Alarm System: 
       Subsystem 4 - Part No SW: 8V0 951 177     HW: 5Q0 951 172 
       Component: Sensor, DWA  005 0316 
       Serial number: 000000000ZY161301D3Z
    
       Alarm horn: 
       Subsystem 5 - Part No SW: 5Q0 951 605 A    HW: 5Q0 951 605 A
       Component: Sirene, DWA  005 0313 
       Serial number: 00000000000035705285
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 15: Airbags (J234)       Labels:| 5Q0-959-655.clb
       Part No SW: 5Q0 959 655 AR    HW: 5Q0 959 655 AR
       Component: AirbagVW21    003 0315  
       Serial number: 003TDR1WJA05
       Coding: 98CCC0000C0000005C5400CA00C800000065
       Shop #: WSC 06385 790 00016
       ASAM Dataset: EV_AirbaVW20SMEVW37X 002154
       ROD: EV_AirbaVW20SMEVW37X.rod
       VCID: 102FDE1ECB4EFFCF37-8044
    
       Side Sensor Driver Front: 
       Subsystem 1 - Part No SW: -----------    HW: 480 001 706 16
       Component: SideSensor_Df  001 0887 
       Serial number: 357000000008F6353C1P
       Coding: 2D2D2D
    
       Side Sensor Passenger Front: 
       Subsystem 2 - Part No SW: -----------    HW: 480 001 706 16
       Component: SideSensor_Pf  001 0887 
       Serial number: 35800000000E05553C1I
       Coding: 2D2D2D
    
       Side Sensor Driver Rear: 
       Subsystem 3 - Part No SW: -----------    HW: 480 402 106 16
       Component: SideSensor_Dr  000 6149 
       Serial number: 3510001C120FC483B855
       Coding: 2D2D2D
    
       Side Sensor Passenger Rear: 
       Subsystem 4 - Part No SW: -----------    HW: 480 402 106 16
       Component: SideSensor_Pr  000 6149 
       Serial number: 3520001C120FC481C43%
       Coding: 2D2D2D
    
       Front Sensor Driver: 
       Subsystem 5 - Part No SW: -----------    HW: 480 401 806 16
       Component: FrontSensor_D  001 6149 
       Serial number: 3550002C7209E9E031EE
       Coding: 2D2D2D
    
       Pedestrian Protection Driver: 
       Subsystem 6 - Part No SW: -----------    HW: 480 402 005 16
       Component: PedP_Sensor_D  001 6149 
       Serial number: 2280002992057290A2B.
       Coding: 2D2D2D
    
       Pedestrian Protection Passenger: 
       Subsystem 7 - Part No SW: -----------    HW: 480 402 005 16
       Component: PedP_Sensor_P  001 6149 
       Serial number: 2290002BB207634162B-
       Coding: 2D2D2D
    
       Pedestrian Protection Driver 2: 
       Subsystem 8 - Part No SW: -----------    HW: 480 002 106 16
       Component: PedPSensor_D2  001 0887 
       Serial number: I0M00000000DA8253C18
       Coding: 2D2D2D
    
       Pedestrian Protection Passenger 2: 
       Subsystem 9 - Part No SW: -----------    HW: 480 002 106 16
       Component: PedPSensor_P2  001 0887 
       Serial number: I0N00000000785540C1/
       Coding: 2D2D2D
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 16: Steering wheel (J527)       Labels:| 5Q0-953-549.clb
       Part No SW: 8V0 953 521 JD    HW: 5Q0 953 549 E
       Component: Lenks. Modul  003 0140  
       Revision: --------    Serial number: 16061604400549
       Coding: A008
       Shop #: WSC 06385 790 00016
       ASAM Dataset: EV_SMLSKLOMQB 020002
       ROD: EV_SMLSKLOMQB_020_AU37.rod
       VCID: 0501FF4A840CAA6794-8050
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 17: Instruments (J285)       Labels:| 5G0-920-XXX-17.clb-SRI3
       Part No SW: 8V0 920 972 L    HW: 8V0 920 972 L
       Component: KOMBI         H03 8315  
       Coding: 27AD19002B9026000100FE001000000000000000
       Shop #: WSC 06385 790 00016
       ASAM Dataset: EV_DashBoardVDDMQBAB 009054
       ROD: EV_DashBoardVDDMQBAB_009_VW37.rod
       VCID: 479D3542FE80787726-8012
    
    2 Faults Found:
    16777018 - Function Restricted due to Interrupted Communications 
              U1110 00 [008] - -
              [New feature! Extended UDS fault detail is only supported by current gen. interfaces]
              Intermittent - Confirmed - Tested Since Memory Clear
                 Freeze Frame:
                        Fault Status: 00000001
                        Fault Priority: 6
                        Fault Frequency: 3
                        Reset counter: 94
                        Mileage: 33702 km
                        Date: 2019.10.06
                        Time: 14:35:34
    
    16776980 - Databus 
              U1121 00 [009] - Missing Message
              [New feature! Extended UDS fault detail is only supported by current gen. interfaces]
              Confirmed - Tested Since Memory Clear
                 Freeze Frame:
                        Fault Status: 00000001
                        Fault Priority: 6
                        Fault Frequency: 1
                        Reset counter: 74
                        Mileage: 34521 km
                        Date: 2019.12.10
                        Time: 20:49:54
    
    
    -------------------------------------------------------------------------------
    Address 19: CAN Gateway (J533)       Labels:| 5Q0-907-530-V1.clb
       Part No SW: 5Q0 907 530 AM    HW: 5Q0 907 530 M
       Component: GW MQB High   212 2265  
       Revision: --------    Serial number: 20061610800366
       Coding: 030100041F0873005B000248080B00000001010000000000000000000000
       Shop #: WSC 06385 790 00016
       ASAM Dataset: EV_GatewConti 013020
       ROD: EV_GatewConti_013.rod
       VCID: 7CF79AAEF7C6EBAFFB-8028
    
       Alternator: 
    
       Multi Function Steering Wheel Control Module: 
       Subsystem 2 - Part No SW: 81A 951 523     HW: 81A 951 523 
       Component: J453 MFL  H04 0003 
       Serial number: 20160610230608 02731
    
       Battery Monitoring Control Module: 
       Subsystem 3 - Part No SW: 5Q0 915 181 J    HW: 5Q0 915 181 J
       Component: J367-BDMConti  H03 1050 
       Serial number: 75410803001606070553
    
    4 Faults Found:
    131594 - Parallel Parking Assistance Control Module 
              U104E 00 [008] - No communication
              [New feature! Extended UDS fault detail is only supported by current gen. interfaces]
              Intermittent - Confirmed - Tested Since Memory Clear
                 Freeze Frame:
                        Fault Status: 00000001
                        Fault Priority: 2
                        Fault Frequency: 254
                        Reset counter: 114
                        Mileage: 33094 km
                        Date: 2019.10.01
                        Time: 23:46:31
    
                        Supply voltage: Terminal 30: 12.1 V
                        Terminal 15: On
    
    131689 - Rear View Camera System Control Module 
              U104C 00 [008] - No communication
              [New feature! Extended UDS fault detail is only supported by current gen. interfaces]
              Intermittent - Confirmed - Tested Since Memory Clear
                 Freeze Frame:
                        Fault Status: 00000001
                        Fault Priority: 2
                        Fault Frequency: 3
                        Reset counter: 114
                        Mileage: 34521 km
                        Date: 2019.12.10
                        Time: 21:18:11
    
                        Supply voltage: Terminal 30: 11.9 V
                        Terminal 15: OFF
    
    66052 - Infotainment CAN Bus (SAE Bus E) 
              U0065 00 [008] - Performance
              [New feature! Extended UDS fault detail is only supported by current gen. interfaces]
              Intermittent - Confirmed - Tested Since Memory Clear
                 Freeze Frame:
                        Fault Status: 00000001
                        Fault Priority: 2
                        Fault Frequency: 1
                        Reset counter: 114
                        Mileage: 34521 km
                        Date: 2019.12.10
                        Time: 19:47:41
    
                        Supply voltage: Terminal 30: 12.1 V
                        Terminal 15: OFF
    
    66304 - Databus 
              U1124 00 [008] - Additional Installations Detected
              [New feature! Extended UDS fault detail is only supported by current gen. interfaces]
              Intermittent - Confirmed - Tested Since Memory Clear
                 Freeze Frame:
                        Fault Status: 00000001
                        Fault Priority: 2
                        Fault Frequency: 1
                        Reset counter: 114
                        Mileage: 34521 km
                        Date: 2019.12.10
                        Time: 20:43:26
    
                        Supply voltage: Terminal 30: 11.9 V
                        Terminal 15: On
    
    
    -------------------------------------------------------------------------------
    Address 42: Door Elect, Driver (J386)       Labels:| 5QX-959-X93-42.clb
       Part No SW: 5Q0 959 593 E    HW: 5Q0 959 593 B
       Component: TSG FS        020 0041  
       Serial number: 010616EEV05263
       Coding: 001C8A204001040000001002
       Shop #: WSC 06385 790 00016
       ASAM Dataset: EV_DCUDriveSideEWMAXKLO 006003
       ROD: EV_DCUDriveSideEWMAXCONT.rod
       VCID: 43852152CAB85457FA-8016
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 44: Steering Assist (J500)       Labels:| 5Q0-909-144.clb
       Part No SW: 5Q0 909 144 T    HW: 5Q0 909 144 R
       Component: EPS_MQB_ZFLS  128 1072  
       Coding: 8107
       Shop #: WSC 06385 790 00016
       ASAM Dataset: EV_SteerAssisMQB 013144
       ROD: EV_SteerAssisMQB_013.rod
       VCID: 45813F4AC48C6A67D4-8010
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 52: Door Elect, Pass. (J387)       Labels:| 5QX-959-X92-52.clb
       Part No SW: 5Q0 959 592 E    HW: 5Q0 959 592 B
       Component: TSG BFS       020 0041  
       Serial number: 040616EF406237
       Coding: 001C82204C01040000001002
       Shop #: WSC 06385 790 00016
       ASAM Dataset: EV_DCUPasseSideEWMAXKLO 006003
       ROD: EV_DCUPasseSideEWMAXCONT.rod
       VCID: 428B2456D5A25D5FF1-8016
    
    1 Fault Found:
    65558 - Heated Exterior Mirror 
              B11F8 14 [009] - Open or Short to Ground
              Confirmed - Tested Since Memory Clear
                 Freeze Frame:
                        Fault Status: 00000001
                        Fault Priority: 3
                        Fault Frequency: 39
                        Reset counter: 69
                        Mileage: 33094 km
                        Date: 2019.10.01
                        Time: 23:55:29
    
    
    -------------------------------------------------------------------------------
    Address 55: Headlight Range (J745)       Labels:* None
       Part No SW: 8V0 907 357 A    HW: 7P6 907 357 B
       Component: MxB-ECU       001 0226  
       Revision: --------    Serial number: --------------
       Coding: 0EDE00102B230200
       Shop #: WSC 06385 790 00016
       ASAM Dataset: EV_HeadlRegulAUDIMXBAU64X 005014
       ROD: EV_HeadlRegulAUDIMXBAU64X_005_AU37.rod
       VCID: 3E7350A6A15A39BF95-806A
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 5F: Information Electr. (J794)       Labels:* Redir Fail!
       Part No SW: 81A 035 192     HW: 81A 035 192 
       Component: MU-HS-LND-EU  045 0148  
       Serial number:               
       Coding: 01730101FF00000011111101000A00102F002AC601F00100CE
       Shop #: WSC 06385 790 00016
       ASAM Dataset: EV_MUHigScl6C3DELP 001011
       ROD: EV_MUHigScl6C3DELP.rod
       VCID: 5EB3F026411A19BFF5-800A
    
       Data medium: 
       Subsystem 1 - Part No SW: V03 959 802 LE    HW: -----------
       Component: ECE 2019/2020  --- 0043 
       Serial number: --------------------
    
       Display unit 1 for multimedia system: 
       Subsystem 2 - Part No SW: 8V0 919 604 C    HW: 8V0 919 604 C
       Component: DU High  H49 0014 
       Serial number: AUZ8Z9GY205UUG      
    
       Multimedia Operating Unit: 
       Subsystem 3 - Part No SW: 8V0 919 614 BE    HW: 8V0 919 614 BE
       Component: ControlUnit_B  H50 0103 
       Serial number: ALJAL113041600010048
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 6C: Back-up Cam. (J772)       Labels:| 5Q0-980-556.clb
       Part No SW: 5Q0 980 556 B    HW: 5Q0 980 556 B
       Component: RVC Compact   H15 0231  
       Coding: 0273000102002001000040
       Shop #: WSC 00000 000 00000
       ASAM Dataset: EV_CamSysRVRVCPANAMQBAB 006009
       ROD: EV_CamSysRVRVCPANAMQBAB_006_VW37.rod
       VCID: 397943BAB8741E87A0-806C
    
    2 Faults Found:
    10489856 - No Basic Setting 
              B2010 00 [009] - -
              [New feature! Extended UDS fault detail is only supported by current gen. interfaces]
              Confirmed - Tested Since Memory Clear
                 Freeze Frame:
                        Fault Status: 00000001
                        Fault Priority: 5
                        Fault Frequency: 1
                        Reset counter: 63
                        Date: 2000.00.00
                        Time: 00:00:00
    
                        OFF
    
    13705478 - Databus 
              U1121 00 [009] - Missing Message
              [New feature! Extended UDS fault detail is only supported by current gen. interfaces]
              Confirmed - Tested Since Memory Clear
                 Freeze Frame:
                        Fault Status: 00000001
                        Fault Priority: 6
                        Fault Frequency: 1
                        Reset counter: 74
                        Mileage: 34521 km
                        Date: 2019.12.10
                        Time: 20:49:49
    
                        passive
    
    
    -------------------------------------------------------------------------------
    Address BB: Door Rear Drv (J388)       Labels:* None
       Part No SW: 5Q0 959 595 E    HW: 5Q0 959 595 B
       Component: TSG HFS       020 0041  
       Serial number: 190516EEF04672
       Coding: 000C82204001040000001002
       Shop #: WSC 06385 790 00016
       ASAM Dataset: EV_DCURearDriveMAXKLO 006003
       ROD: EV_DCURearDriveMAXCONT.rod
       VCID: 45813F4AC48C6A67D4-8010
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address BC: Door Rear Pass (J389)       Labels:* None
       Part No SW: 5Q0 959 595 E    HW: 5Q0 959 595 B
       Component: TSG HBFS      020 0041  
       Serial number: 190516EEF04678
       Coding: 000C82204001040000001002
       Shop #: WSC 06385 790 00016
       ASAM Dataset: EV_DCURearPasseMAXKLO 006003
       ROD: EV_DCURearPasseMAXCONT.rod
       VCID: 45813F4AC48C6A67D4-8010
    
    No fault code found.
    
    End-------------------------(Elapsed Time: 03:46)--------------------------

  2. #2
    Verified VCDS User
    Join Date
    Mar 2015
    Location
    Australia
    Posts
    383
    Post Thanks / Like
    In 5F you need to enable RVC.
    Byte 19 bit 4 needs to enabled.

    VPS is for highline RVC modules, you might need to change those back to disabled.
    2011 Skoda Octavia vRS TDI DSG wagon|Revo Stage 1|Race Blue|Leather|Dynamic Xenons w 6000K|THA475 Amp+active sub|Whiteline ALK|RVC|Discover Media
    2009 R36 wagon|Biscay Blue|RVC|Tailgate|ECU and DSG tune|LED DRL/Indicators|Full colour MFD|Quad LED tail rings| Climatronics upgrade| Dynaudio retrofit | B7 RLine Flat Steering Wheel|3AA CCM|B7 Adaptive Cruise with Front Assist|TPMS Direct|Discover Media retrofit|PLA 2.0|Lane Assist|BCM Retrofit|HBA/FLA

  3. #3
    Verified VCDS User
    Join Date
    Mar 2016
    Location
    UK
    Posts
    178
    Post Thanks / Like
    The fact you can see it as 6C means its a highline version as it has can bus lines, not a low line, so you dont need to do Byte 19/Bit 4 in 5F

    If you have enabled in Can Gateway installation list (as its showing in the list) your good.

    Yes, the video wires should go into 6 + 12 in the back of the MMI, so you've done that right. There is no separate "control unit" box in the MLBEvo platform.

    You've done the 2 Adaptation channels in 5F right but change this one to "Termainl 15"

    BAP-VPS_ox0B_msg_bus > Set to Terminal 15

    Go into Module 09, byte 38 and set bit2-3 to camera_variant_vps_installed

    Reboot (3 finger reboot) the MMI and you should be good to go

    Let us know

    Andy

    p.s. Get your VCDS Dongle upgraded to a Hex-Net or Hex-V2. Its why you cant see all the modules currently. RT do a trade-in upgrade I believe.
    Q7 272PS | ABT Tuned to 325PS / 680Nm | Tech Pack | Dynamic Pack | Matrix Lights | Pan Roof | Trailer | Drv+Pass Mem Seats | TV | N-Vision | BOSE | DVD Changer | Homelink | Soft Door Close | Heat+Sound Ins Glass | Priv Glass | Heated Windscreen | Heated Steer Wheel | Adv Key | Elec Boot Cover | Side Assist | Air Suspension | Ambient Lighting | Heated+Fold Mirrors | Park Assist Pack | Load Fix Kit | Black Turbine Alloys | Matte Black Wrap

  4. Likes Uwe liked this post
  5. #4
    Verified VCDS User
    Join Date
    Mar 2015
    Location
    Australia
    Posts
    383
    Post Thanks / Like
    My apologies I only skimmed and didn't notice the RVC compact at 6C.
    It has no basic settings so needs calibration, however it will still display the image when otherwise correctly configured.
    2011 Skoda Octavia vRS TDI DSG wagon|Revo Stage 1|Race Blue|Leather|Dynamic Xenons w 6000K|THA475 Amp+active sub|Whiteline ALK|RVC|Discover Media
    2009 R36 wagon|Biscay Blue|RVC|Tailgate|ECU and DSG tune|LED DRL/Indicators|Full colour MFD|Quad LED tail rings| Climatronics upgrade| Dynaudio retrofit | B7 RLine Flat Steering Wheel|3AA CCM|B7 Adaptive Cruise with Front Assist|TPMS Direct|Discover Media retrofit|PLA 2.0|Lane Assist|BCM Retrofit|HBA/FLA

  6. #5
    Verified VCDS User
    Join Date
    May 2014
    Location
    Melbourne, Australia
    Posts
    3,087
    Post Thanks / Like
    Quote Originally Posted by LukeLewis24 View Post
    Hi I am trying to install a backup camera to the car.

    I have wired it directly into the MMI and the car recognises that the camera is attached.

    The cables I was given and have connected

    Can Bus High - Entertainment
    Can Bus Low - Entertainment
    Black Wire from Camera into Blue connector in MMI #6
    White Wire from Camera into Blue connector in MMI #12
    7.5A Power Supply
    Earth Connection


    However I am unable to get the camera to appear on the screen when I select reverse gear.

    Under Info Elect I have changed the following

    - BAP-VPS_0x0B to activated
    - BAP-VPS_ox0B_msg_bus to Comfort Data Bus


    I have looked online and some people are using a reversing camera system control unit but the cables I was given go directly into the MMI?

    Confused!

    Can anyone help me with this?

    Thanks

    Luke

    Luke: Hi.

    Below is a schematic of the hex6C arrangement that I have cobbled together from a number of pages in the A3 WD:



    So, here's the thing - I'm confused too about the bits that I have highlighted in your post. No offense intended, but the coax wire from J772 to J794 may be reversed if what you have written is what you actually did!!

    Don
    VW Golf MkVII (MY13) - A3 8V hatch (MY17)

  7. Likes Uwe liked this post
  8. #6
    Verified VCDS User
    Join Date
    Oct 2018
    Location
    UK
    Posts
    9
    Post Thanks / Like
    Quote Originally Posted by andyhud View Post
    The fact you can see it as 6C means its a highline version as it has can bus lines, not a low line, so you dont need to do Byte 19/Bit 4 in 5F

    If you have enabled in Can Gateway installation list (as its showing in the list) your good.

    Yes, the video wires should go into 6 + 12 in the back of the MMI, so you've done that right. There is no separate "control unit" box in the MLBEvo platform.

    You've done the 2 Adaptation channels in 5F right but change this one to "Termainl 15"

    BAP-VPS_ox0B_msg_bus > Set to Terminal 15

    Go into Module 09, byte 38 and set bit2-3 to camera_variant_vps_installed

    Reboot (3 finger reboot) the MMI and you should be good to go

    Let us know

    Andy

    p.s. Get your VCDS Dongle upgraded to a Hex-Net or Hex-V2. Its why you cant see all the modules currently. RT do a trade-in upgrade I believe.
    Hi Guys,

    thank you for your help so far! Checked the wiring and I had done it right but typed it wrong in the original post.

    come across another little issue though,

    I changed it to Terminal 15

    but when i went into Module 9 - Central Electronics I came across this message

    "Coding is NOT Supported by this module variant. Replacement control modules must be parameterized by using the factory tool and software-version management. Many relevent options (relating to retrofits/modifications) can be found by using the adaption function of the control module.

    Any suggestions a way around this?

    Thank you!

  9. #7
    Verified VCDS User
    Join Date
    May 2014
    Location
    Melbourne, Australia
    Posts
    3,087
    Post Thanks / Like
    Luke: quite correct - your BCM has a zero code string (see your auto-scan) - all of the software switches that were in long coding in previous modules have been transferred to adaptation channels. I wasn't aware that the BCM ever had a "Byte 38", but I can't find an adaptation channel in my database with a name approaching "camera_variant_vps_installed" - perhaps andy can confirm instruction?

    further suggestion: hex5F module IDE03471-ENG126143-Vehicle configuration-RVC_video_input check setting FBAS

    Don
    Last edited by DV52; 12-13-2019 at 04:56 AM.
    VW Golf MkVII (MY13) - A3 8V hatch (MY17)

  10. Likes Uwe liked this post
  11. #8
    Verified VCDS User
    Join Date
    Mar 2016
    Location
    UK
    Posts
    178
    Post Thanks / Like
    Yep, make sure that 5f Adaptation is on FBAS - Good spot @DV52

    Thats odd on Module 09 - What VCDS dongle are you using? HexCANUSB? or HEx-Net / Hex-V2? You may need the latter. I can certainly access a 2016 A3 Module 09 fine on a Hex-Net interface

    Regarding this "camera_variant_rvc_installed" - its a drop down list, but will only show a drop down list on the newer interfaces... so otherwise go into Module 09, Long Coding, Byte 38 and Tick Bit 2 for the same result.

    Sorry, above I put "camera_variant_vps_installed" which is wrong. Thats for 360Degree Cameras.
    Q7 272PS | ABT Tuned to 325PS / 680Nm | Tech Pack | Dynamic Pack | Matrix Lights | Pan Roof | Trailer | Drv+Pass Mem Seats | TV | N-Vision | BOSE | DVD Changer | Homelink | Soft Door Close | Heat+Sound Ins Glass | Priv Glass | Heated Windscreen | Heated Steer Wheel | Adv Key | Elec Boot Cover | Side Assist | Air Suspension | Ambient Lighting | Heated+Fold Mirrors | Park Assist Pack | Load Fix Kit | Black Turbine Alloys | Matte Black Wrap

  12. #9
    Verified VCDS User
    Join Date
    Oct 2018
    Location
    UK
    Posts
    9
    Post Thanks / Like
    Quote Originally Posted by andyhud View Post
    Yep, make sure that 5f Adaptation is on FBAS - Good spot @DV52

    Thats odd on Module 09 - What VCDS dongle are you using? HexCANUSB? or HEx-Net / Hex-V2? You may need the latter. I can certainly access a 2016 A3 Module 09 fine on a Hex-Net interface

    Regarding this "camera_variant_rvc_installed" - its a drop down list, but will only show a drop down list on the newer interfaces... so otherwise go into Module 09, Long Coding, Byte 38 and Tick Bit 2 for the same result.

    Sorry, above I put "camera_variant_vps_installed" which is wrong. Thats for 360Degree Cameras.
    Hello!

    I have the old version of the HEX cable and I think this is why I am having issues. Seen on RT that it supports up to 2015.

    Ordered a HEX NET and will give this a go when it arrives in a few days and I shall let you guys know I get on!

    Thanks

  13. #10
    Verified VCDS User
    Join Date
    May 2016
    Location
    Netherlands
    Posts
    128
    Post Thanks / Like
    This is the right way do to this:

    In 5F set vps activated and vps bus to terminal 15. Also set the pdc to activated and treshold also to activated. Then reset mmi and voila! No coding in bcm is needed. This because I see that the car dont have PDC it needs to be triggered...

    So bcm coding byte 38 is no needed. This is only for a4 a5 q5 q7 models no need audi a3.

    Try and report

  14. Likes andyhud liked this post

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •