Results 1 to 2 of 2

Thread: Hi / Volkswagen CC 2013

  1. #1
    New User
    Join Date
    Dec 2019
    Location
    France
    Posts
    1
    Post Thanks / Like

    Hi / Volkswagen CC 2013

    Hi There !

    I'm new overhere.

    Looking to do a conversion on a 2013 CC from USA to EU lightning without having light error message..

    Does anyone already did this ?
    I did it on a 2012 Touareg some years ago following an internet tuto.. but this time i'm totally lost...

    I've seen i've got 4 wires at the tail. i gues :
    - Negative
    -Park
    -Park + Stop / turn (with variable voltage)
    -Stop - Turn on the last one.

    The idea is to program the :
    -Park + Stop / Turn on a Park Stop only
    -Stop turn to work only in turn, so i can add an amber led stripe on the transparent lens.

    I would like to program the Rear fog Light to.

    What i need ? A Light switch with the rear fog on it ? maybe some wiring from switch to Bcm ? (Wich Pin) ?
    Maybe i have to wire Bcm to tail also ?

    If someone had an idea or already did the job any info appreciated =)
    John

  2. #2
    VCDS Distributor Mike@Gendan's Avatar
    Join Date
    Jun 2014
    Location
    Swansea, UK
    Posts
    596
    Post Thanks / Like
    Hi John,

    First things first - assuming you have VCDS please can you post a full Auto-Scan?
    Apparently I should put something witty or profound in here.....

  3. Likes Uwe, Dana liked this post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •