Results 1 to 3 of 3

Thread: 2019 Audi Q8 - Level Control Issue

  1. #1
    Verified VCDS User
    Join Date
    Nov 2019
    Location
    UK
    Posts
    1
    Post Thanks / Like

    2019 Audi Q8 - Level Control Issue

    Good evening all,

    I have vcds with hex v2 and trying to calibrate the air suspension on a 2019 Audi Q8

    Basically I want to insert values higher so the car sits slightly lower.

    The issue is I get when going into option 34 is the error “no response from controller” and I am not sure if it’s because the
    car is too new or if I need to upgrade my vcds or lead etc

    Any help would be greatly appreciated.

    Thanks

    J

  2. #2
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    26,437
    Post Thanks / Like
    Blog Entries
    1
    A HEX-V2 is current and should communicate with everything in that car.

    Please post an Auto-Scan so we can see how it is equipped.

    -Uwe-
    The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.

  3. #3
    Verified VCDS User
    Join Date
    Mar 2016
    Location
    UK
    Posts
    178
    Post Thanks / Like
    I'm 99.9% sure this can't be done with VCDS.
    Q7 272PS | ABT Tuned to 325PS / 680Nm | Tech Pack | Dynamic Pack | Matrix Lights | Pan Roof | Trailer | Drv+Pass Mem Seats | TV | N-Vision | BOSE | DVD Changer | Homelink | Soft Door Close | Heat+Sound Ins Glass | Priv Glass | Heated Windscreen | Heated Steer Wheel | Adv Key | Elec Boot Cover | Side Assist | Air Suspension | Ambient Lighting | Heated+Fold Mirrors | Park Assist Pack | Load Fix Kit | Black Turbine Alloys | Matte Black Wrap

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •