Does anyone know if you can switch off the high voltage system with VCDS in the new e-Crafter?
Thanks in advance.
Thanks in advance.
I always remember the acronym I was taught for safe working on HV systems:From poking around on Andy's A3 e-tron, what actually disables the high voltage system is pulling a plug that completes a low-voltage circuit that energizes the coil of the high-voltage contactor. Everything done with a scan-tool is just "CYA" verification.
Bah. 400V is hardly "High Voltage".I always remember the acronym I was taught for safe working on HV systems:
True, 500kV is much scarier but 400V DC can still be fatal if not treated with respect.Bah. 400V is hardly "High Voltage".