- Joined
- Jul 5, 2019
- Messages
- 93
- Reaction score
- 7
- Location
- Kuala Lumpur, Malaysia
- VCDS Serial number
- C?ID=345326
Hello there,
ran my just acquired vcds on my A6 C7 a few times and on the last scan after clearing the faults code a few times I've got the following remaining faults codes:
My questions are:
1. for address 01, whether I need to replace the Bank 2 camshaft position sensor to clear the fault codes?
2. fault codes for address 09 and address 55 are about headlight range and seem related, what should I do? As for this issue the yellow adaptive light indicator on the instrument cluster is lit.
3. for address 28 and 46?
Appreciate you suggestion and help. Thank you all in advance.
Regards
ran my just acquired vcds on my A6 C7 a few times and on the last scan after clearing the faults code a few times I've got the following remaining faults codes:
Code:
Address 01: Engine (J623-CGWB) Labels:. 06E-907-551-CGW.clb
Part No SW: 4G0 907 551 HW: 4H0 907 551
Component: 3.0l V6 TFSI H05 0007
Revision: --H05---
Coding: 0A250034052701020000
Shop #: WSC 02311 785 00200
ASAM Dataset: EV_ECM30TFS0214G0907551 002010
ROD: EV_ECM30TFS0214G0907551_002.rod
VCID: 6695B5FFE8EFBBD753B-8032
1 Fault Found:
6368 - Bank 2: CMP Sens 2 (G163) / Engine Speed Sensor (G28)
P0018 00 [039] - Incorrect Correlation
Not Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 1
Mileage: 165872 km
Date: 2019.11.07
Time: 11:00:33
Engine speed: 690.00 /min
Normed load value: 22.0 %
Vehicle speed: 0 km/h
Coolant temperature: 93 °C
Intake air temperature: 76 °C
Ambient air pressure: 980 mbar
Voltage terminal 30: 13.304 V
Unlearning counter according OBD: 40
Engine speed: actual: 672 /min
MAF_ENVD: 136.17647 mg/stroke
Calculated oil temperature: 85
Engine: operating status: IS
ENVD_CAM_IN_2: 0
Battery voltage: 13.507813 V
Readiness: 0110 0001
Address 09: Cent. Elect. (J519) Labels:. 4H0-907-063-V1.clb
Part No SW: 4H0 907 063 N HW: 4H0 907 063 F
Component: BCM1 2.0 H12 0092
Revision: 20012002 Serial number: 00000001044197
Coding: 0200201050B49FE0C181008380001908CF9DC3082F080101000008402100
Shop #: WSC 02391 785 00200
VCID: 33331CABEB3D1E7F045-8066
Subsystem 1 - Part No SW: 4G2 955 119 HW: 4G8 955 119 A Labels: 1KX-955-119.CLB
Component: WWS57X 110404 H35 0051
Serial number: 110407090850
Coding: 0045F7
Subsystem 2 - Part No SW: 8K0 955 559 HW: 8K0 955 559 Labels: 8K0-955-559.CLB
Component: RLS H04 0003
Serial number: 11418017
Coding: 02512B
Subsystem 3 - Part No SW: 4G0 941 531 E HW: 4G0 941 531 E
Component: E1 - LDS H07 0044
Serial number: 22 04 2011 00000235
Subsystem 4 - Part No SW: 4H0 907 658 HW: 4H0 907 658
Component: AQ_Hum_Sensor H02 0002
Serial number: 5228C6A5000000000001
1 Fault Found:
01771 - Control Module for Headlight Range (J431)
013 - Check DTC Memory
Freeze Frame:
Fault Status: 01101101
Fault Priority: 6
Fault Frequency: 1
Reset counter: 243
Mileage: 165872 km
Time Indication: 0
Date: 2019.11.07
Time: 11:00:00
Address 28: HVAC, Rear (E265) Labels:* 4G0-919-158.clb
Part No SW: 4G0 919 158 C HW: 4G0 919 158 C
Component: KLIMA FOND H07 0056
Serial number: 06051100040012
Coding: 02
Shop #: WSC 02391 785 00200
ASAM Dataset: EV_ClimaContrUnitRearUDS 002012
ROD: EV_ClimaContrUnitRearUDS_002.rod
VCID: 2F3B10DB07953A9F60D-807A
1 Fault Found:
0026 - Motor for Rear Left Upper Body Vent
B10D3 21 [009] - Signal Amplitude Too Low
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 3
Fault Frequency: 1
Reset counter: 243
Mileage: 165872 km
Date: 2019.11.07
Time: 11:00:26
Voltage terminal 30: 14.04 V
Outside air temperature: 38.5 °C
Left Rear Upper Body Vent Motor-Act.val.: 10812
Left Rear Upper Body Vent Motor-Specified value: 10812
Left Rear Upper Body Vent Motor-Stop open: 11400
Left Rear Upper Body Vent Motor-Stop closed: 10000
Address 46: Central Conv. (J393) Labels:. 4H0-907-064-46.clb
Part No SW: 4H0 907 064 AP HW: 4H0 907 064 AP
Component: BCM2 2.0 H24 0217
Revision: 00002001 Serial number: 0149428872
Coding: 011B0E2200B9048183300804080100000000000000000000000000000000
Shop #: WSC 02391 785 00200
VCID: 77ABE8BBBFC5325FF8D-8022
Subsystem 1 - Part No: 4G0 951 177
Component: DWA-Sensor H01 0010
Subsystem 2 - Part No: 1K0 951 605 C
Component: LIN BACKUP HO H05 1501
1 Fault Found:
01134 - Alarm Horn (H12)
014 - Defective
Freeze Frame:
Fault Status: 01101110
Fault Priority: 2
Fault Frequency: 1
Reset counter: 243
Mileage: 165872 km
Time Indication: 0
Date: 2019.11.07
Time: 11:00:28
Address 55: Headlight Range (J431) Labels:| 4H4-907-357-V1.clb
Part No SW: 4H4 907 357 A HW: 4H4 907 357 A
Component: ....AFS13.... H01 0012
Serial number: 110502-0004-033
Coding: 1121A633F918EB00
Shop #: WSC 02391 785 00200
ASAM Dataset: EV_AdvanFrontSyste 005001
ROD: EV_AdvanFrontSyste_AU21.rod
VCID: 303913A71AAB2567797-8064
Left Headlamp Power Output Stage:
H02 0008
Coding: 1D0000
Right Headlamp Power Output Stage:
H02 0008
Coding: 1D0000
1 Fault Found:
0061 - Function Restriction due to Implausible Message(s)
U1112 00 [137] - -
[Fehlerhafter DLC der CAN-Messages Kamera_Status (0x318)]
MIL ON - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 6
Fault Frequency: 1
Reset counter: 243
Mileage: 165872 km
Date: 2019.11.07
Time: 11:00:30
My questions are:
1. for address 01, whether I need to replace the Bank 2 camshaft position sensor to clear the fault codes?
2. fault codes for address 09 and address 55 are about headlight range and seem related, what should I do? As for this issue the yellow adaptive light indicator on the instrument cluster is lit.
3. for address 28 and 46?
Appreciate you suggestion and help. Thank you all in advance.
Regards