Results 1 to 2 of 2

Thread: Coding and programming

  1. #1
    Verified VCDS User
    Join Date
    Oct 2019
    Location
    Australia
    Posts
    1
    Post Thanks / Like

    Coding and programming

    Hi guys, ive just replaced an active cruise control unit on a 2018 VW Golf
    My question how do i go about coding the new module.
    I have transfered the coding number from one module to the other one BUT it still comes up with with 'module incorrect coded" and about 3 codes regarding module protection.
    i just need to know if it can be coded any way through ross tech or needs to go to the dealer so they can do it online through the Geko portal.

    Ps i have machine to do calibration (adas) , just need to get around the coding side of things.

  2. #2
    VCDS Distributor Mike@Gendan's Avatar
    Join Date
    Jun 2014
    Location
    Swansea, UK
    Posts
    601
    Post Thanks / Like
    The first thing you're going to need to do is post a full Auto-Scan
    Apparently I should put something witty or profound in here.....

  3. Likes myounus, Uwe liked this post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •