Results 1 to 10 of 16

Thread: Bench Testing 2003 A6 2.7t Cluster

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Verified VCDS User
    Join Date
    Oct 2019
    Location
    Florida, USA
    Posts
    10
    Post Thanks / Like

    Bench Testing 2003 A6 2.7t Cluster

    Hello guys new to Ross Tech i got the new Hex V2 and i can read the cluster and everything else in car i take the cluster out (ill explain in a sec) and hook it up and i get failed to initiate vcds tests and reads in options... ok back story my battery went dead in the car changed my battery and good ole immo came on (reflashed ECU Epromm to immo off, to drive car)lol went to redapt and cant .... so hooked up cheapy ftdi ft232r cable and read cluster its in shambles totally corrupt so take it out to try and recover eeprom on bench and k-line (which 10000 sites say its pin 25 on blue) will not read, hook it back in car it reads put it back on bench it will not .... pin 1,23 +possitive, 7,9,24 -negitive, k-line 25, every site i go to which have been doing for days i have done literally over 100 searches each in a different format and still come up the same thing. What am missing or people that do this, what secret step are they keeping to them selves.... no one around here does eeprom burning anymore and i dont want to buy a burner for just one time use, PLEASE HELP. I am register owner of my Hex v2 if you need to check email is [redacted].. thank you
    Last edited by Uwe; 10-24-2019 at 01:25 PM. Reason: e-mail address redacted

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •