Just found this thread whilst trying to resolve a problem with the distance sensor on a 2017 golf GTi.
Error message on dashboard says front assist unavailable. Here is the coding I found:
Work Shop Code: WSC 01357 011 00200
ASAM Dataset: EV_ACCBOSCHVW416 002005 (VW37)
ROD: EV_ACCBOSCHVW416_002_VW37.rod
VCID: 3C21379876E1AAE7D5F-8068
1 Fault Found:
0791 - Sensor for Automatic Distance Regulation; Incorrectly Positioned
C1103 00 [009] - -
[FAULT_MISALIGNMENT_VERTICAL]
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 4
Fault Frequency: 1
Reset counter: 46
Mileage: 2699 km
Date: 2019.10.19
Time: 11:15:20
Control Module temperature: 23 °C
Voltage terminal 15: 11.7 V
Velocity_vehicle_reference: 0.00 m/s
Longitudinal_acceleration_vehicle_reference: 0.00 m/s²
Status_ACC_System: ACC_Off_MainSwitch_Off
The front of the car has been apart but no accident damage, when it was put back together it was fine, but then a few days later this error occurred.
So is this a dealer only re calibration?
Thanks.
Error message on dashboard says front assist unavailable. Here is the coding I found:
Work Shop Code: WSC 01357 011 00200
ASAM Dataset: EV_ACCBOSCHVW416 002005 (VW37)
ROD: EV_ACCBOSCHVW416_002_VW37.rod
VCID: 3C21379876E1AAE7D5F-8068
1 Fault Found:
0791 - Sensor for Automatic Distance Regulation; Incorrectly Positioned
C1103 00 [009] - -
[FAULT_MISALIGNMENT_VERTICAL]
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 4
Fault Frequency: 1
Reset counter: 46
Mileage: 2699 km
Date: 2019.10.19
Time: 11:15:20
Control Module temperature: 23 °C
Voltage terminal 15: 11.7 V
Velocity_vehicle_reference: 0.00 m/s
Longitudinal_acceleration_vehicle_reference: 0.00 m/s²
Status_ACC_System: ACC_Off_MainSwitch_Off
The front of the car has been apart but no accident damage, when it was put back together it was fine, but then a few days later this error occurred.
So is this a dealer only re calibration?
Thanks.
Last edited by a moderator: