Results 1 to 4 of 4

Thread: Cant start the engine. SAFE on Dashboard

  1. #1
    Pirate
    Join Date
    Oct 2019
    Location
    Sofia, Bulgaria
    Posts
    1
    Post Thanks / Like

    Cant start the engine. SAFE on Dashboard

    Hi,

    I have the car for well over 8 years. Once or twice a year when I try to start the engine nothing happens and it says SAFE on the dashboard. The only solution to this is to remove the positive terminal from the battery for 30 seconds. This is what I get with VCDS immediately after the issue occurred. Any ideas on where the issue is, I think that after 8 years it is time to be fixed.

    Code:
    Removed. Data from a clone/pirate/hacked version of VCDS is not welcome here.
    Last edited by Uwe; 10-18-2019 at 10:18 AM.

  2. #2
    VCDS Distributor Mike@Gendan's Avatar
    Join Date
    Jun 2014
    Location
    Swansea, UK
    Posts
    571
    Post Thanks / Like
    Quote Originally Posted by zafirovp View Post
    17978 - Engine Start Blocked by Immobilizer
    That looks the likely culprit to me - it could be a communications glitch between the transponder in the key and the receiver ring in the ignition barrel.
    A friend's old Seat Leon used to do it occasionally.

    See if clearing that fault code will allow it to start.

    There's also more info here: http://wiki.ross-tech.com/wiki/index...8/P1570/005488


    Edit - having said that, something's not right here:
    Code:
    Address 05: Acc/Start Auth. Labels:. 4F0-910-852.clb
    Part No SW: 4F0 910 852 B HW: OOOOOO
    Component: FBSAUDIC6 ELV HO 0130
    Revision: 00HO000 Serial number: OOOOOOO
    Coding: 1068816
    Shop #: WSC 69711 039 133602
    VCID: 251AB872DBADAEB3C9-8070
    
    2 Faults Found:
    01044 - Control Module Incorrectly Coded
    000 - -
    Freeze Frame:
    Fault Status: 01100000
    Fault Priority: 2
    Fault Frequency: 1
    Reset counter: 0
    Time Indication: 0
    
    02084 - Component Protection
    005 - No or Incorrect Basic Setting / Adaptation
    Freeze Frame:
    Fault Status: 01100101
    Fault Priority: 1
    Fault Frequency: 1
    Reset counter: 0
    Time Indication: 0
    ...and loads of Component Protection errors - has anything been swapped from another car / retrofitted?
    Last edited by Mike@Gendan; 10-18-2019 at 09:07 AM.
    Apparently I should put something witty or profound in here.....

  3. Likes PetrolDave liked this post
  4. #3
    Verified VCDS User PetrolDave's Avatar
    Join Date
    Dec 2014
    Location
    South Molton, UK
    Posts
    2,558
    Post Thanks / Like
    It's not unknown for the connections to the immobiliser sense coil to be intermittent, would be worth checking in that area.

  5. Likes Mike@Gendan liked this post
  6. #4
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    25,393
    Post Thanks / Like
    Blog Entries
    1
    Hacked car. Hacked VCDS.

    Getting help on this forum requires the use of a legitimate VCDS system.

    They are available directly from us:
    https://store.ross-tech.com/shop/cat/VCDS

    ... Or from any of our authorized resellers:
    http://www.ross-tech.com/distributors.php

    Let us know if/when you get one and we'll adjust your forum status.

    -Uwe-
    The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.

  7. Likes PetrolDave, Mike@Gendan liked this post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •