Results 1 to 2 of 2

Thread: Brake Assist Adaptation Setting on 2018 VW Passat 2.0 T

  1. #1
    Verified VCDS User
    Join Date
    Oct 2019
    Woodbridge NJ, USA
    Post Thanks / Like

    Brake Assist Adaptation Setting on 2018 VW Passat 2.0 T

    Hello everyone,

    I need help understanding what the Brake Assist Adaptation setting does when it changes See attached picture Basically my car hesitates and has no power on any of the setting except 2 (default is 0 "average") Also if anyone performs a throttle body adaptation which I think resets this brake assist adaptation the care drives fine on default setting for 150 miles

    My idea is that something is wrong somewhere that is causing default setting to have a hesitation

    I drove 3 other Passats same year/engine and they all drive on default setting like mine drives on setting 2

    Any help with this will be appreciated

    Last edited by Uwe; 10-15-2019 at 10:10 PM. Reason: Fixed tags & image

  2. #2
    Verified VCDS User
    Join Date
    Oct 2017
    Northwest UK
    Post Thanks / Like
    Brake assist settings are part of the design for the ADAS system in VW. You would be adapting the effort required on pushing the pedal before the brakes engage. If you change this setting you would also need to run basic settings to re-calibrate.

  3. Likes Uwe liked this post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts