I swapped out the auto trans for a manual in my 2000 Jetta. All is good, car runs great; however, it has CEL related to auto trans codes.
I tried to change the engine coding from 00033 to 00031 using VCDS and I get:
18020 - engine control module incorrectly coded P1612 - 35-00
Code:
VCDS-Lite Version: Release 1.2
Wednesday, 09 October 2019, 18:34:39:57286
Chassis Type: 9M - VW Jetta IV
Scan: 01,02,03,08,09,15,16,17,19,22,29,35,36,37,39,46,47,55,56,57,75,76
-------------------------------------------------------------------------------
Address 01: Engine Labels: Redir Fail!
Controller: 06A 906 018 JM
Component: 2.0l R4/2V MOTR AT V01
Coding: 00033
Shop #: WSC 09250
VCID: 769FBA1D41DF
No fault code found.
Readiness: 0110 0101
-------------------------------------------------------------------------------
Address 02: Auto Trans Labels: 01M-927-733.LBL
Controller: 01M 927 733 HM
Component: AG4 Getriebe 01M 4604
Coding: 00000
Shop #: WSC 00000
VCID: 827756CD9D17
10 Faults Found:
00258 - Solenoid Valve 1 (N88)
36-00 - Open Circuit
00260 - Solenoid Valve 2 (N89)
36-00 - Open Circuit
00262 - Solenoid Valve 3 (N90)
36-00 - Open Circuit
00264 - Solenoid Valve 4 (N91)
36-00 - Open Circuit
00266 - Solenoid Valve 5 (N92)
36-00 - Open Circuit
00270 - Solenoid Valve 7 (N94)
36-00 - Open Circuit
00268 - Solenoid Valve 6 (N93)
36-10 - Open Circuit - Intermittent
00293 - Multi-function Switch (F125)
25-00 - Unknown Switch Condition
00281 - Vehicle Speed Sensor (G68)
03-00 - No Signal
00297 - Gearbox Speed Sensor (G38)
03-00 - No Signal
-------------------------------------------------------------------------------
Address 03: ABS Brakes Labels: 1J0-907-37x-ABS.LBL
Controller: 1J0 907 379 P
Component: ABS 20 IE CAN 0001
Coding: 03504
Shop #: WSC 00066
VCID: 3E0F623D296F
No fault code found.
-------------------------------------------------------------------------------
Address 15: Airbags Labels: 6Q0-909-605-VW5.LBL
Controller: 6Q0 909 605 A
Component: 09 AIRBAG VW5 0003
Coding: 12345
Shop #: WSC 00066
VCID: 351D7D111C59
No fault code found.
-------------------------------------------------------------------------------
Address 17: Instruments Labels: 1J0-920-xx0-17.LBL
Controller: 1J0 920 900 K
Component: A4-KOMBIINSTR. VDO V56
Coding: 07242
Shop #: WSC 00066
VCID: 2A275E6DC5E7
IMMO-IDENTNR: VWZ7Z0X1515416
No fault code found.
-------------------------------------------------------------------------------
Address 19: CAN Gateway Labels: 6N0-909-901-19.LBL
Controller: 6N0 909 901
Component: Gateway K<->CAN 0001
Coding: 00007
Shop #: WSC 00066
VCID: F0930C05A3BB
No fault code found.
-------------------------------------------------------------------------------
Address 35: Centr. Locks Labels: 1C0-962-258-II.LBL
Controller: 1C0 962 258 P
Component: 0J Zentr.Verriegel. 0001
Coding: 04096
Shop #: WSC 00066
VCID: 341B40151723
1 Fault Found:
00953 - Interior Light Time limit
25-10 - Unknown Switch Condition - Intermittent
End --------------------------------------------------------------------------------------------------
I tried to change the engine coding from 00033 to 00031 using VCDS and I get:
18020 - engine control module incorrectly coded P1612 - 35-00