Results 1 to 6 of 6

Thread: Restoring Adaptation Channel Settings

  1. #1
    Verified VCDS User
    Join Date
    Aug 2019
    Location
    North Yorkshire, UK
    Posts
    13
    Post Thanks / Like

    Restoring Adaptation Channel Settings

    Having taken a 'whole vehicle' database of my vehicle I would like to know that if I ever need to do a restore of the 'whole vehicle' can this be done OR has each each module address to be restored separately?

  2. #2
    Verified VCDS User
    Join Date
    May 2017
    Location
    Finland
    Posts
    1,231
    Post Thanks / Like
    There’s no option to restore adaptation values to their default. Only option is to use ODIS with factory connection and use online configuration of the module.

    And if you’re referring to basic setting ”Reset adaptation”. Do not use it, it will wipe out the entire module contents. Restoring that is out of VCDS’ scope on most modules then.

  3. #3
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    24,960
    Post Thanks / Like
    Blog Entries
    1
    If you've made Raw Hex backups and you wish to restore them, I believe you have to do it one module at a time.

    -Uwe-
    The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.

  4. Likes downtime liked this post
  5. #4
    Verified VCDS User
    Join Date
    Aug 2019
    Location
    North Yorkshire, UK
    Posts
    13
    Post Thanks / Like
    Don't think your right on this one.
    I definitely have the option to restore adaptation values from my Raw-Hex database using my HEX-V2 kit.

  6. #5
    Verified VCDS User
    Join Date
    Aug 2019
    Location
    North Yorkshire, UK
    Posts
    13
    Post Thanks / Like
    That's what I thought. Thanks for the reply

  7. #6
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    24,960
    Post Thanks / Like
    Blog Entries
    1
    Quote Originally Posted by Charcoal75 View Post
    Don't think your right on this one.
    I definitely have the option to restore adaptation values from my Raw-Hex database using my HEX-V2 kit.
    Yes, I'm sure you do. But for all the control modules ("whole car")?

    Personally, I wouldn't, even if it's possible.

    -Uwe-
    The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •