Hello guys! after a bettery replacement I did to my car I had this issue I already codded the new one, also tried to disconnect again the battery, connected again the second time the first time I'm not sure I followed the right procedure, so there is a chance this may be the problem after the replacement and some kms going forward, I have 2 issues:
1. Error: Start & Stop 2. car does not start at small attemp I have to start it with the entire switch, before I coud start it with small movements but not anymore
No more issues, I already ran severals scans and some DTCs came up, but today I disconnected the sensor that is coming from the battery in the negative side and reconnected it again, after another scan only 1 DTC remains with the EPC turned on and the symptoms mentioned above; any support is really appreciatted
Here is the result of the last scan:
1. Error: Start & Stop 2. car does not start at small attemp I have to start it with the entire switch, before I coud start it with small movements but not anymore
No more issues, I already ran severals scans and some DTCs came up, but today I disconnected the sensor that is coming from the battery in the negative side and reconnected it again, after another scan only 1 DTC remains with the EPC turned on and the symptoms mentioned above; any support is really appreciatted
Here is the result of the last scan:
Code:
Removed. Data from a clone/pirate copy of VCDS is not welcome here.
Last edited by a moderator: