Audi A5 2011 2.0Tfsi esp/traction control light on no fault codes stored

   #1  

Scottyboyc56

New Member
Joined
Sep 13, 2019
Messages
4
Reaction score
0
Location
UK
As above no fault codes stored, wheel alignment checked and steering angle sensor calibrated. Anyone had this fault before?
Could it be a coding issue?
Thanks in advance
 
   #2  

Uwe

Benevolent Dictator
Administrator
Joined
Jan 29, 2014
Messages
48,740
Reaction score
33,540
Location
USA
VCDS Serial number
HC100001
Please post an Auto-Scan so people can see how the car is equipped and configured.

-Uwe-
 
   #3  

Scottyboyc56

New Member
Joined
Sep 13, 2019
Messages
4
Reaction score
0
Location
UK
I’ll try and get one posted. Does it sound like a coding issue to you?
 
   #6  

Scottyboyc56

New Member
Joined
Sep 13, 2019
Messages
4
Reaction score
0
Location
UK
Audi A5 longitudinal sensor calibration

Would you carry out a longitudinal/ yaw rate sensor calibration if the abs module has been replaced?

TIA
 
Last edited:
   #7  

Viking

Verified VCDS User
Verified
Joined
Nov 2, 2015
Messages
478
Reaction score
493
Location
UK
VCDS Serial number
C?ID=151455
Still waiting for a complete autoscan from your previous thread.
 
   #8  

PetrolDave

Verified VCDS User
Verified
Joined
Dec 16, 2014
Messages
7,849
Reaction score
7,740
Location
Westbury, UK
VCDS Serial number
C?ID=1423
Are we to assume that the problems mentioned in your previous thread are a result of changing the ABS module?

If so then please don't start another thread for problems with the same cause - it splits replies and causes confusion :thanks:

Without an Auto-Scan we cannot help you :banghead:
 
  • Like
Reactions: Uwe
   #9  

Uwe

Benevolent Dictator
Administrator
Joined
Jan 29, 2014
Messages
48,740
Reaction score
33,540
Location
USA
VCDS Serial number
HC100001
Threads merged. :cool:

-Uwe-
 
Back
Top