Results 1 to 5 of 5

Thread: Retrofit Cruise control (B7 A4)

  1. #1
    New User
    Join Date
    Aug 2019
    Location
    Portugal
    Posts
    2
    Post Thanks / Like

    Retrofit Cruise control (B7 A4)

    Hello, i own a 2005 A4 Avant 2.0tdi b7, it have steering wheel with multifunction, phone and voice and the module is 8E0 953 549 Q . After installed the Cruise Control handle 4E0 953 521B, i did both coding on engine activation and steering chose the Cruise Control bit.
    It doesnt work and give me This faults:
    00895 Cruise control Distance 37-00 and the fault 18107 on engine.
    O dont know if i was supposed to do some wiring modifications...
    Hope someone can help,
    Best retards,
    Tiago

  2. #2
    VCDS Distributor Mike@Gendan's Avatar
    Join Date
    Jun 2014
    Location
    Swansea, UK
    Posts
    522
    Post Thanks / Like
    First things first, please can you post a full unedited Auto-Scan, so we can see what's fitted to the car?
    Apparently I should put something witty or profound in here.....

  3. Likes PetrolDave, Uwe liked this post
  4. #3
    Verified VCDS User PetrolDave's Avatar
    Join Date
    Dec 2014
    Location
    South Molton, UK
    Posts
    2,354
    Post Thanks / Like
    Please post a full unedited VCDS Auto-Scan of your B7 A4.

    I've done several CC retrofits on the B7 and never had to make any wiring changes.

    Did you make sure that both the SWSM supports cruise (not all do on the B7) and that the cruise switch was in the off position when you did the coding/activation changes?

  5. Likes Uwe liked this post
  6. #4
    New User
    Join Date
    Aug 2019
    Location
    Portugal
    Posts
    2
    Post Thanks / Like
    Thanks you for response, how can i post picture?
    Also, i think that the Cruise Control wasnt on off position when i did coding.
    Can i disable everithing then enable again with the Cruise off?
    What is the swsm? Is the SMLS?
    Regards

  7. #5
    Verified VCDS User PetrolDave's Avatar
    Join Date
    Dec 2014
    Location
    South Molton, UK
    Posts
    2,354
    Post Thanks / Like
    Quote Originally Posted by tiagmt View Post
    Thanks you for response, how can i post picture?
    You don't need to post a picture to post a VCDS Auto-Scan - see my signature for a How-To.

    Quote Originally Posted by tiagmt View Post
    What is the swsm? Is the SMLS?
    SWSM = Steering Wheel Switch Module

  8. Likes Uwe liked this post

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •