- Joined
- Feb 22, 2017
- Messages
- 14
- Reaction score
- 1
- Location
- Snta Cruz, CA. USA
- VCDS Serial number
- C?ID=52835
I had trouble with my WIFI hexnet not connecting. I updated to release 19.6, then it said I needed to update the hexnet.
I plugged it in with the usb cable and was able to get it updated .
Then still no interface found. Port 10002/777 need to be open , I had already done this previously.
Last I rebooted as suggested in a few threads, connected with cable to find it was recognizing the interface.
Last test resulted in this.
Status: Questionable?
Saved,
Last it did connect, but should I be concerned?
Tried to post a picture, but permissions do not allow.
I plugged it in with the usb cable and was able to get it updated .
Then still no interface found. Port 10002/777 need to be open , I had already done this previously.
Last I rebooted as suggested in a few threads, connected with cable to find it was recognizing the interface.
Last test resulted in this.
Status: Questionable?
Saved,
Last it did connect, but should I be concerned?
Tried to post a picture, but permissions do not allow.