Results 1 to 6 of 6

Thread: A fault code from Turkey, Could you help me?

  1. #1
    Pirate
    Join Date
    Aug 2019
    Location
    Turkey
    Posts
    2
    Post Thanks / Like

    A fault code from Turkey, Could you help me?

    Hi everyone, I am Mustafa from Turkey.

    I have 2016 model year of Seat Leon 1.2 TSI.

    I wanna ask some fault codes about my car. I hope you can help me.

    I scanned my car by VCDS cable. A fault code was dedected. I cleared that. A week after i scanned again. Same code was there and i cleared. A week after i scanned again, same fault code was there.

    Code:
    Removed.  Data from a clone/pirate copy of VCDS is not welcome here.
    At fault code's date, i didnt remember anything. Engine light or some light else are not on.

    I asked a mechanic. He said reason is battery,probably battery voltage is low.

    I checked battery voltage on car' electronics. It was 11,4 V.


    Now there is no problem about car's driving or something else. But fault code is still there.

    What will i do? What are you guys advise to me?

    Thanks in advance.
    Last edited by Uwe; 08-23-2019 at 10:28 AM.

  2. #2
    Verified VCDS User
    Join Date
    Nov 2016
    Location
    UK
    Posts
    165
    Post Thanks / Like
    No, because freeloaders with fake VCDS dont get help here

  3. #3
    Ross-Tech Employee
    Join Date
    Jan 2014
    Location
    Near Philadelphia, PA, USA
    Posts
    1,031
    Post Thanks / Like
    Blog Entries
    3
    Mustafa,

    While what Rhinopower has written is true that we do not help those using an illegal copy of our product, 11,4 volts is quite low for most electronic modules. Why is the battery so low? I should think that would cause trouble in many modules.

    If you want our help, legitimate systems are available from our distributing partners or here in our web shop. When you have a real system, we will be pleased to help further.

  4. Likes Uwe liked this post
  5. #4
    Verified VCDS User PetrolDave's Avatar
    Join Date
    Dec 2014
    Location
    South Molton, UK
    Posts
    2,349
    Post Thanks / Like
    OP - you MUST post a full unedited VCDS Auto-Scan using a genuine Ross-Tech cable for us to be able to help you.

  6. Likes Uwe liked this post
  7. #5
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    24,610
    Post Thanks / Like
    Blog Entries
    1
    Quote Originally Posted by Genc View Post
    I hope you can help me.
    Quote Originally Posted by amper View Post
    Can You please help me?
    Getting help in this forum requires the use of a legitimate VCDS system.

    They are available directly from us:
    https://store.ross-tech.com/shop/cat/VCDS

    ... Or from any of our authorized resellers:
    http://www.ross-tech.com/distributors.php

    Let us know if/when you get one and we'll adjust your forum status.

    -Uwe-
    The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.

  8. #6
    Pirate
    Join Date
    Aug 2019
    Location
    Turkey
    Posts
    2
    Post Thanks / Like
    Quote Originally Posted by Bruce View Post
    Mustafa,

    While what Rhinopower has written is true that we do not help those using an illegal copy of our product, 11,4 volts is quite low for most electronic modules. Why is the battery so low? I should think that would cause trouble in many modules.

    If you want our help, legitimate systems are available from our distributing partners or here in our web shop. When you have a real system, we will be pleased to help further.
    Thanks Bruce for your kindly answer. My car is almost 3 years old, but battery is low, i dont know about this situation. Forum rules. I understood that, but my economic situation is not good. Original copy is too expensive to buy for me. So good bye then.

    And thank you guys for helpfulness @rhinopower @PetrolDave and dear admin of course @Uwe .

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •