Good morning! Can somebody with the MIB 2 verify the system behavior when left powered on with power supplied, engine off?
I have one that I just applied the CP hardware patch to and in bench testing it, the radio powers off at about half an hour. It'll come right back on when pushing the power/volume knob.
Just wanted to make sure that the radio is performing as expected. The application of wires to the SMD pads on the motherboard proved to be a challenge.
Thanks!
I have one that I just applied the CP hardware patch to and in bench testing it, the radio powers off at about half an hour. It'll come right back on when pushing the power/volume knob.
Just wanted to make sure that the radio is performing as expected. The application of wires to the SMD pads on the motherboard proved to be a challenge.
Thanks!