Results 1 to 10 of 10

Thread: Steering angle, abs, traction fault.

  1. #1
    Verified VCDS User
    Join Date
    Aug 2019
    Location
    UK
    Posts
    6
    Post Thanks / Like

    Steering angle, abs, traction fault.

    I have a problem with getting my test drive after wheel bearing and wss replacement. Did 2 at the rear of the car.
    I've done a short video and this is what my wheel speed sensors showing at 40kmh. Don't know what exactly the should be like.

    Thank you


  2. #2
    NostraJackAss Jack@European_Parts's Avatar
    Join Date
    Jan 2014
    Location
    1001 State Route 17K Montgomery New York 12549
    Posts
    16,527
    Post Thanks / Like
    Welcome to the VCDS forum OP

    This is not an auto-scan and please post one & tell us what specific make and part numbers you used during your repair process?

    JPPSG

    https://forums.ross-tech.com/showthr...uot-JPPSG-quot


    European Parts Emporium/Performance / Immobilizer Solutions EPE
    Certified Master Trained NY/BAR/BAD 7076062/ASE/SAE/NASTF Legal Factory Authorized/Licensed GeKo/FaZit # 403738
    Specializing in Custom Services IE: "welding-fabrication" / EPA-SMOG Update or Pass-Thru-Programming / Data Transfer / Immobilizers & OEM Quality Parts
    Above Magic! No Written record, AUTO-SCAN or Appointment = NO HELP!
    www.FixMyEuro.com <<<<<CLICK HERE! or vwemporium@aol.com ( JPPSG & Unverified members need not PM me & Please don't email or call facility for free tech support...use the forum )
    Getting you CONTROL again of your property - TAKE IT! In Conjunction with.........

  3. #3
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    24,179
    Post Thanks / Like
    Blog Entries
    1
    Actual logged data so people can tell exactly what they're looking at would be preferred to a wobbly video.

    -Uwe-
    The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.

  4. Likes Jack@European_Parts liked this post
  5. #4
    Verified VCDS User
    Join Date
    Aug 2019
    Location
    UK
    Posts
    6
    Post Thanks / Like
    as i said before this is the problem

    Code:
    Wednesday,21,August,2019,20:52:38:12161
    VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64
    VCDS Version: 19.6.1.0 (x64)  HEX-V2 CB: 0.4508.4
    Data version: 20190529 DS308.0
    www.Ross-Tech.com
    
    
    
    
    --------------------------------------------------------------------------------
    --------------------------------------------------------------------------------
    
    
    Chassis Type: 1K (1K0)
    Scan: 01 03 08 09 15 16 17 19 25 42 44 46 52 56
    
    Mileage: 115480km-71755miles
    
    00-Steering Angle Sensor -- Status: OK 0000
    01-Engine -- Status: OK 0000
    03-ABS Brakes -- Status: Malfunction 0010
    08-Auto HVAC -- Status: Malfunction 0010
    09-Cent. Elect. -- Status: OK 0000
    15-Airbags -- Status: OK 0000
    16-Steering wheel -- Status: Malfunction 0010
    17-Instruments -- Status: OK 0000
    19-CAN Gateway -- Status: OK 0000
    25-Immobilizer -- Status: OK 0000
    42-Door Elect, Driver -- Status: OK 0000
    44-Steering Assist -- Status: Malfunction 0010
    46-Central Conv. -- Status: OK 0000
    52-Door Elect, Pass. -- Status: OK 0000
    56-Radio -- Status: OK 0000
    -------------------------------------------------------------------------------
    Address 01: Engine        Labels: 03C-906-056-BAG.lbl
       Part No SW: 03C 997 056 M    HW: Hardware No 
       Component: MED9.5.10       G00 9265  
       Revision: 00000000    Serial number: VWZ7Z0C8817741
       Coding: 0000072
       Shop #: WSC 01287 785 00200
       VCID: 372B2B8CD34F7CAF3B3-8062
    
    No fault code found.
    Readiness: 1110 0001
    
    -------------------------------------------------------------------------------
    Address 03: ABS Brakes        Labels: 1K0-907-379-MK60-F.lbl
       Part No: 1K0 907 379 K
       Component: ESP FRONT MK60      0103  
       Coding: 0019073
       Shop #: WSC 01287 785 00200
       VCID: 3A2D32B8E05D61C7C4D-806E
    
    2 Faults Found:
    01486 - System Function Test Activated 
                000 - -
    00778 - Steering Angle Sensor (G85) 
                005 - No or Incorrect Basic Setting / Adaptation
    
    -------------------------------------------------------------------------------
    Address 08: Auto HVAC        Labels: 1K0-820-047.lbl
       Part No: 1K0 820 047 CC
       Component: Climatic PQ35   080 0201  
       Shop #: WSC 00000 000 00000
       VCID: 678BBBCCC36F2C2F6B3-8032
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 09: Cent. Elect.        Labels:. 3C0-937-049-23-H.lbl
       Part No SW: 1K0 937 049 L    HW: 1K0 937 049 L*
       Component: Bordnetz-SG 1.0 H30 0701  
       Revision: 00030000    Serial number: 00000000493804
       Coding: E58F8F0600041800001400001400000000
       Shop #: WSC 00000 000 00000
       VCID: 382928B0DE5173D7329-806C
    
       Subsystem 1 - Part No: 1K2 955 119 B  Labels: 1KX-955-119.CLB
       Component: Wischer VW350  012  0401  
       Coding: 00065493
       Shop #: WSC 00000  
    
       Subsystem 2 - Part No: 1K0 955 559 K  Labels: 1K0-955-559-AF.CLB
       Component: RegenLichtSens 002  0505  
       Coding: 00217125
       Shop #: WSC 00000  
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 15: Airbags        Labels: 1K0-909-605.lbl
       Part No SW: 1K0 909 605 A    HW: 1K0 909 605 A
       Component: 0M AIRBAG VW8   022 0500  
       Revision: 04022000    Serial number: 0033FD08EPD8  
       Coding: 0012365
       Shop #: WSC 01268 785 00200
       VCID: 2A0D02F810FDD147B4D-807E
    
       Subsystem 1 - Serial number: 6332MSME69132602 
    
       Subsystem 2 - Serial number: 6342MSME46307001 
    
       Subsystem 3 - Serial number: 6351HSME04106201 
    
       Subsystem 4 - Serial number: 6361HSME60145B01 
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 16: Steering wheel        Labels: 1K0-953-549-MY8.lbl
       Part No SW: 1K0 953 549 AF    HW: 1K0 953 549 AF
       Component: Lenksäulenmodul 034 0070  
       Coding: 0000042
       Shop #: WSC 00046 412 688128
       VCID: 76B5E68894C5C5A7E05-8022
    
    1 Fault Found:
    00888 - Wiper Switch for Intermittent Operation (E22) 
                014 - Defective
    
    -------------------------------------------------------------------------------
    Address 17: Instruments        Labels: 1K0-920-xxx-17.lbl
       Part No: 1K0 920 950 K
       Component: KOMBIINSTRUMENT VDD 3550  
       Coding: 0005401
       Shop #: WSC 33120 003 1048576
       VCID: 303910903621AB977A9-8064
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 19: CAN Gateway        Labels:. 1K0-907-530-V1.clb
       Part No SW: 1K0 907 530 C    HW: 1K0 907 951 
       Component: Gateway         H08 0080  
       Revision: 08          Serial number: 21001042020135
       Coding: 3D0F0340070003
       Shop #: WSC 01287 785 00200
       VCID: 270BFBCC03EFEC2FAB3-8072
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 25: Immobilizer        Labels: 1K0-920-xxx-25.clb
       Part No: 1K0 920 950 K
       Component: IMMO                3550  
       Shop #: WSC 00000 000 00000
       VCID: 303910903621AB977A9-8064
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 42: Door Elect, Driver        Labels: 1K0-959-701-MIN1.lbl
       Part No: 1K0 959 701 E
       Component: Tuersteuergeraet 09 0116  
       Coding: 0000052
       Shop #: WSC 01287 785 00200
       VCID: 303910903621AB977A9-8064
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 44: Steering Assist        Labels: 1Kx-909-144-G2V1.clb
       Part No: 1K2 909 144 E
       Component: EPS_ZFLS Kl.1       1302  
       Shop #: WSC 00000 000 00000
       VCID: 2E050EE82C15BD67685-807A
    
    2 Faults Found:
    02546 - Steering Limit Stop 
                005 - No or Incorrect Basic Setting / Adaptation
                 Freeze Frame:
                        Mileage: 5480 km
                        Temperature: 32.0°C
                        Voltage: 13.50 V
                        Voltage: 13.40 V
    
    00778 - Steering Angle Sensor (G85) 
                005 - No or Incorrect Basic Setting / Adaptation
                 Freeze Frame:
    
    
    -------------------------------------------------------------------------------
    Address 46: Central Conv.        Labels:. 1K0-959-433-MIN.clb
       Part No: 1K0 959 433 T
       Component: 0W KSG              0560  
       Coding: 99E802087F2D8505485BC61000
       Shop #: WSC 00581 210 06001
       VCID: 41DF45548D8B321F857-8014
    
       Subsystem 1 - Part No: 1K0 951 605 A
       Component: LIN BACKUP HORN H01 1201
    
       Subsystem 2 - Part No: 1K0 907 719 
       Component: Neigungssensor  003 0003
    
       Subsystem 3 - Part No: 1K0 951 177 
       Component: Innenraumueberw.004 0101
    
    1 Fault Found:
    01134 - Alarm Horn (H12) 
                000 - -
    
    -------------------------------------------------------------------------------
    Address 52: Door Elect, Pass.        Labels: 1K0-959-702-MIN1.lbl
       Part No: 1K0 959 702 E
       Component: Tuersteuergeraet 09 0116  
       Coding: 0000052
       Shop #: WSC 01287 785 00200
       VCID: 313F15943D2BA29F757-8064
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 56: Radio        Labels: 1K0-035-1xx-56.lbl
       Part No: 1K0 035 186 J
       Component: Radio BNO           0016  
       Coding: 0040400
       Shop #: WSC 01287 785 00200
       VCID: 2D0709E42113C67F51F-8078
    
    No fault code found.
    
    End----------(Elapsed Time: 00:57, VBatt start/end: 13.6V/13.6V)-----------
    Last edited by Uwe; 08-21-2019 at 06:19 PM. Reason: QUOTE -> CODE

  6. #5
    NostraJackAss Jack@European_Parts's Avatar
    Join Date
    Jan 2014
    Location
    1001 State Route 17K Montgomery New York 12549
    Posts
    16,527
    Post Thanks / Like
    Do the adaption ........

    http://wiki.ross-tech.com/wiki/index...#Basic_Setting


    Always log all four speed sensors at a time and in raw numbers is preferred to line up a suspect deviation.

    So far I see no faults for a deviation!
    European Parts Emporium/Performance / Immobilizer Solutions EPE
    Certified Master Trained NY/BAR/BAD 7076062/ASE/SAE/NASTF Legal Factory Authorized/Licensed GeKo/FaZit # 403738
    Specializing in Custom Services IE: "welding-fabrication" / EPA-SMOG Update or Pass-Thru-Programming / Data Transfer / Immobilizers & OEM Quality Parts
    Above Magic! No Written record, AUTO-SCAN or Appointment = NO HELP!
    www.FixMyEuro.com <<<<<CLICK HERE! or vwemporium@aol.com ( JPPSG & Unverified members need not PM me & Please don't email or call facility for free tech support...use the forum )
    Getting you CONTROL again of your property - TAKE IT! In Conjunction with.........

  7. #6
    Verified VCDS User
    Join Date
    Aug 2019
    Location
    UK
    Posts
    6
    Post Thanks / Like
    Quote Originally Posted by Jack@European_Parts View Post
    Do the adaption ........

    http://wiki.ross-tech.com/wiki/index...#Basic_Setting


    Always log all four speed sensors at a time and in raw numbers is preferred to line up a suspect deviation.

    So far I see no faults for a deviation!
    I've tried that but mine always says "not possible"

  8. #7
    NostraJackAss Jack@European_Parts's Avatar
    Join Date
    Jan 2014
    Location
    1001 State Route 17K Montgomery New York 12549
    Posts
    16,527
    Post Thanks / Like
    What test is failing or is a login error because the test is activated?

    You need to drive it or maybe lift and set back down to re relax the suspension maybe and drive it?

    2 Faults Found:
    01486 - System Function Test Activated
    European Parts Emporium/Performance / Immobilizer Solutions EPE
    Certified Master Trained NY/BAR/BAD 7076062/ASE/SAE/NASTF Legal Factory Authorized/Licensed GeKo/FaZit # 403738
    Specializing in Custom Services IE: "welding-fabrication" / EPA-SMOG Update or Pass-Thru-Programming / Data Transfer / Immobilizers & OEM Quality Parts
    Above Magic! No Written record, AUTO-SCAN or Appointment = NO HELP!
    www.FixMyEuro.com <<<<<CLICK HERE! or vwemporium@aol.com ( JPPSG & Unverified members need not PM me & Please don't email or call facility for free tech support...use the forum )
    Getting you CONTROL again of your property - TAKE IT! In Conjunction with.........

  9. #8
    Verified VCDS User
    Join Date
    Aug 2019
    Location
    UK
    Posts
    6
    Post Thanks / Like
    It's a possibility, but this is the reason why I posted this here, I've tried to do all the tests in all orders, I can't log in as it's refusing the key, and as far as I tracked down the problem, the test can not be successful due the wheel speed sensor are not reading correctly, as you can see on the graph the speed is actually 20km/h and front right wheel showing around 30km and one at the rear wheels showing around 10km/h.

  10. #9
    NostraJackAss Jack@European_Parts's Avatar
    Join Date
    Jan 2014
    Location
    1001 State Route 17K Montgomery New York 12549
    Posts
    16,527
    Post Thanks / Like
    You would never enter the calibration test mode if that was the case to commence adaption.
    Retrace each work step during calibration to complete the adaptation until completed.
    European Parts Emporium/Performance / Immobilizer Solutions EPE
    Certified Master Trained NY/BAR/BAD 7076062/ASE/SAE/NASTF Legal Factory Authorized/Licensed GeKo/FaZit # 403738
    Specializing in Custom Services IE: "welding-fabrication" / EPA-SMOG Update or Pass-Thru-Programming / Data Transfer / Immobilizers & OEM Quality Parts
    Above Magic! No Written record, AUTO-SCAN or Appointment = NO HELP!
    www.FixMyEuro.com <<<<<CLICK HERE! or vwemporium@aol.com ( JPPSG & Unverified members need not PM me & Please don't email or call facility for free tech support...use the forum )
    Getting you CONTROL again of your property - TAKE IT! In Conjunction with.........

  11. #10
    Verified VCDS User
    Join Date
    Aug 2019
    Location
    UK
    Posts
    6
    Post Thanks / Like
    I've done the test drive as it's described, my only problem now is the security access, it wont allow me to accept the 40168. The ecu has been disconnected before and batter has been removed, I've change the all sensors and cleaned all the abs rings on wheel bearings, I don't have a problem with readings anymore, I've solved that problem. My only concern if I need to do some sort of calibration on the abs pump, is there anything you be able to recomend me? Thank you.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •