Hello, i have one problem with my DSG software.
I have skoda octavia MK3 year 2015 DSG 7. My mechatronic was damaged so i buy new one with tha same HW number 0AM 927 769 E (DSG7). I check and the mechatronic unit but the origin was from Seat Leon 1.8TSI. Of course skoda dealer unblock the component protection - no immo error. All working, but the dealer no reflash the firmware. Is it possible to do it?


Now on new (SEAT) i have this:

Address 02: Auto Trans (J743) Labels: 0CW-927-769.clb
Part No SW: 0CW 300 042 H HW: 0AM 927 769 E
Component: GSG DQ200G2_M H05 1604
Revision: 000050085 Serial number: CU5017712155584



On my previous unit (SKODA) was:
Address 02: Auto Trans (J743) Labels: 0CW-927-769.clb
Part No SW: 0CW 300 048 J HW: 0AM 927 769 E
Component: GSG DQ200G2_M H05 0611
Revision: 00005005 Serial number: CU501507115569

The problem is that new TCM as two error: one is that no communication with parking break module ( yes because skoda has no EPB) and second is with RPM ( software for TSI is different).

So the Part No SW is different and Software verson is different.. Is it possible to reflash it ?

Thank