Results 1 to 1 of 1

Thread: Eos Top Operation via Basic Settings (DO NOT DO THIS)

  1. #1
    Ross-Tech Employee Jef's Avatar
    Join Date
    Jan 2014
    Location
    HQ
    Posts
    2,070
    Post Thanks / Like

    Eos Top Operation via Basic Settings (DO NOT DO THIS)

    There is a method to use a dealer level scan tool like VCDS to operate the top, it is done via Basic Setting. However...

    IT IS VERY DANGEROUS, INJURY AND DAMAGE CAN HAPPEN!!!!!!!!!!!
    IT IS VERY DANGEROUS, INJURY AND DAMAGE CAN HAPPEN!!!!!!!!!!!
    IT IS VERY DANGEROUS, INJURY AND DAMAGE CAN HAPPEN!!!!!!!!!!!
    IT IS VERY DANGEROUS, INJURY AND DAMAGE CAN HAPPEN!!!!!!!!!!!


    Just to be clear on this...

    IT IS VERY DANGEROUS, INJURY AND DAMAGE CAN HAPPEN!!!!!!!!!!!
    IT IS VERY DANGEROUS, INJURY AND DAMAGE CAN HAPPEN!!!!!!!!!!!
    IT IS VERY DANGEROUS, INJURY AND DAMAGE CAN HAPPEN!!!!!!!!!!!

    I can not understate this... the Roof Electronics will ignore any and all safety measure that are in place during normal operation.

    Unless you have proper training on this and a very solid understanding of Eos top operation, I would suggest to farm this out to some one who has the skill set to do this.

    Use this information at your own risk!
    Here is the very brief summery of what is involved:



    With a top in proper working order, fully closed, one can go through each step to open the top, then close the top.

    HOWEVER, you have something out of factory design, hence the 02805 - System Interference fault code. It could be something is out of sync and will fall back into place as it should when doing the the Basic Settings steps. But it could be damaged hardware and thus the Roof Electronics does not have "control" over something.

    Please allow me to repeat myself:
    IT IS VERY DANGEROUS, INJURY AND DAMAGE CAN HAPPEN!!!!!!!!!!!
    Last edited by Jef; 09-20-2019 at 12:10 PM.
    Jef
    Ross Tech Support Team, Alpha Squad
    Auto-Scan, learn it, love it, live it... then check the fuses.

  2. Likes jyoung8607, Dana, Uwe, PetrolDave liked this post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •