Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Cannot update

  1. #1
    Verified VCDS User
    Join Date
    Dec 2015
    Location
    Greece
    Posts
    32
    Post Thanks / Like

    Cannot update

    My HEX-NET interface cannot update ASAM!
    Also stucks when I try to access Engine!

    I post an auto scan here!

    Code:
    #hndoc:?docid=000051E7&xt=hnh:17A2E2902D933650D85838A5C18FFA16EF1E95AF3EEEF915335A82B0209B0168
    VCDS Mobile 0.4508.0.4
    
    Scan: 01 02 03 08 09 10 15 17 19 25 44 55
    
    01-Engine -- Status: OK 0000
    02-Auto Trans -- Status: OK 0000
    03-ABS Brakes -- Status: OK 0000
    08-Auto HVAC -- Status: OK 16000
    09-Cent. Elect. -- Status: OK 16000
    10-Park/Steer Assist -- Status: OK 0000
    15-Airbags -- Status: OK 0000
    17-Instruments -- Status: OK 0000
    19-CAN Gateway -- Status: OK 16000
    25-Immobilizer -- Status: OK 0000
    44-Steering Assist -- Status: OK 0000
    55-Xenon Range -- Status: OK 0000
    
    
    
    -----------------------------------------------------------------
    Address 01: Engine  (CAVE J623)	Labels: 03C-907-309-V1.clb
    	Part No SW: 03C 906 027 AR	HW: 03C 906 027 AR
    	Component: 1.4l R4 TSI   H15 9971
    	Revision: L2H15---
    	Coding: 00250012002400000000
    	Shop #: WSC 00017 666 02801
    	ASAM Dataset: EV_ECM14TSI01103C906027AR 001014
    	ROD: N/A
    	VCID: 71A546C70477922CD57C42-8024
    
    	No ASAM data for: "EV_ECM14TSI01103C906027AR"
    No fault codes found.
    
    -----------------------------------------------------------------
    Address 02: Auto Trans	Labels: 0AM-927-769.clb
    	Part No SW: 0AM 300 050 K	HW: 0AM927769D
    	Component: GSG DSG AG7     403  9032
    	Revision: 00040034	Serial Number: TFK01012130269
    	Coding: 0000020
    	Shop #: WSC 22643 000 1048576
    	VCID: 312586C7C4F74B2C95FC82-513C
    
    No fault codes found.
    
    -----------------------------------------------------------------
    Address 03: ABS Brakes  (J104)	Labels: 6R0-907-37x-ESP82.clb
    	Part No SW: 6R0 907 379 AK	HW: 6R0 907 379 AF
    	Component: ESP8.2i front H05 0001
    	Revision: --------
    	Coding: 210248E3417602BB842512E682D640411700
    	Shop #: WSC 00788 648 00255
    	VCID: 8751881F9AF3209CEB584C-80D2
    
    No fault codes found.
    
    -----------------------------------------------------------------
    Address 08: Auto HVAC  (J255)	Labels: 6R0-907-044.clb
    	Part No SW: 6R0 907 044 N	HW: 6R0 907 044 N
    	Component: Climatronic   H12 0812
    	Revision: V0000000
    	Shop #: WSC 00000 000
    	VCID: 3E3FADFB05A92554187E31-806B
    
    No fault codes found.
    
    -----------------------------------------------------------------
    Address 09: Cent. Elect.  (J519)	Labels: 7H0-937-08x-09.clb
    	Part No SW: 7H0 937 089 D	HW: 7H0 937 089
    	Component: BCM T5GP Li4  H47 0230
    	Revision: BS047001
    	Coding: 3DB029BF48F324009B280EB17CEB0FD05AC0670F60053041200000000000
    	Shop #: WSC 124697 483 00190
    	VCID: 3731B8DF2A93141CDB38FC-8062
    
    	Subsystem 1 - 	Part No SW: 1K0-955-559-AH	Labels: 1K0-955-559-AG.clb
    	Component: RLS 140111 0554  0403
    	Coding: 06302D
    
    	Subsystem 2 - 	Part No SW: 6R0-959-801-AB	Labels: 6R0-959-801.clb
    	Component: J386__TSG_FT 007 1621
    	Coding: 08BC30
    
    	Subsystem 3 - 	Part No SW: 6R0-959-802-AD	Labels: 6R0-959-802.clb
    	Component: J387__TSG_BT 007 1621
    	Coding: 08BC30
    
    	Subsystem 4 - 	Part No SW: 1K8-951-171-A
    	Component: DWA-Sensor 00001 0103
    	Coding: 000000
    
    	Subsystem 5 - 	Part No SW: 1K8-951-605-B
    	Component: LIN BACKUP HOH11 9005
    	Coding: 000000
    
    	Subsystem 6 - 	Part No SW: 6R0-959-591-A
    	Component: J245 PS72.015H05 0006
    	Coding: 081001
    
    	Subsystem 7 - 	Part No SW: 1K8-951-171-A
    	Component: DWA-Sensor 00001 0103
    	Coding: 000000
    
    	Subsystem 8 - 	Part No SW: 5K0-959-542
    	Component: E221__MFL-TASH06 0010
    	Coding: 830000
    
    No fault codes found.
    
    -----------------------------------------------------------------
    Address 10: Park/Steer Assist  (J446)	Labels: 6R0-919-475.clb
    	Part No SW: 6R0 919 475 B	HW: 7E0 919 475
    	Component: PARKHILFE 4K  H10 0012
    	Revision: --------
    	Coding: 108104
    	Shop #: WSC 00788 648 00255
    	ASAM Dataset: EV_VW250ParkiAssis2 S01008
    	ROD: N/A
    	VCID: 3D3DAAF708AF264C01743E-8068
    
    	No ASAM data for: "EV_VW250ParkiAssis2"
    No fault codes found.
    
    -----------------------------------------------------------------
    Address 15: Airbags  (J234)	Labels: 5K0-959-655.clb
    	Part No SW: 6R0 959 655 M	HW: 6R0 959 655 M
    	Component: VW10Airbag012 H09 0020
    	Revision: --------
    	Coding: 003132
    	Shop #: WSC 00788 648 00255
    	ASAM Dataset: EV_AirbaVW10BPAVW250 A01001
    	ROD: N/A
    	VCID: 4CDBF73343159FC486EADB-8019
    
    	No ASAM data for: "EV_AirbaVW10BPAVW250"
    	Subsystem 1 - 	Serial Number: 3575HRB406509RECAH8F
    
    	Subsystem 2 - 	Serial Number: 3585HRB406109REC297 
    
    	Subsystem 3 - 	Serial Number: 3515RRB405709GGUGHB 
    
    No fault codes found.
    
    -----------------------------------------------------------------
    Address 17: Instruments  (J285)	Labels: 5K0-920-xxx-17.clb
    	Part No SW: 6R0 920 870	HW: 6R0 920 870
    	Component: KOMBI         H20 0320
    	Coding: 140E00
    	Shop #: WSC 00788 648 00255
    	ASAM Dataset: EV_Kombi_UDS_VDD_RM09 A04086
    	ROD: N/A
    	VCID: F2A7C9CB81712934AC66F5-80A7
    
    	No ASAM data for: "EV_Kombi_UDS_VDD_RM09"
    No fault codes found.
    
    -----------------------------------------------------------------
    Address 19: CAN Gateway  (J533)	Labels: 6N0-909-901-19.lbl
    	Part No SW: 6N0 909 901	HW: 7H0 937 089
    	Component: GW-K-CAN TP20 0230
    	Coding: 002000
    	Shop #: WSC 124697 483 00190
    	VCID: F0A3C3C38F7D03245A72CF-80A5
    
    No fault codes found.
    
    -----------------------------------------------------------------
    Address 25: Immobilizer  (J334)	Labels: 5K0-920-xxx-25.clb
    	Part No SW: 5K0 953 234	HW: 5K0 953 234
    	Component: IMMO          H20 0320
    	Coding: 000000
    	Shop #: WSC 00000 000 00000
    	ASAM Dataset: EV_Immo_UDS_VDD_RM09 A03008
    	ROD: N/A
    	VCID: EA97D1ABA9A1E1F414368D-80BF
    
    	No ASAM data for: "EV_Immo_UDS_VDD_RM09"
    No fault codes found.
    
    -----------------------------------------------------------------
    Address 44: Steering Assist	Labels: 6Q0-423-156.clb
    	Part No SW: 6R0 423 156 B	
    	Component: LenkhilfeTRW        V277
    	Coding: 11241
    	Shop #: WSC 00788 000
    	VCID: 2F2180BFD2C348DC83C894-807A
    
    No fault codes found.
    
    -----------------------------------------------------------------
    Address 55: Xenon Range  (J431)	Labels: 6R0-907-357.clb
    	Part No SW: 6R0 907 357	HW: 6R0 907 357
    	Component: LWR-ECU       H02 0070
    	Revision: --------
    	Coding: 0110000001000000
    	Shop #: WSC 00788 648 00255
    	ASAM Dataset: EV_HeadlRegulVWLWRPt 001004
    	ROD: N/A
    	VCID: F7B1F8DFEA134C1C9BB83C-80A2
    
    	No ASAM data for: "EV_HeadlRegulVWLWRPt"
    No fault codes found.
    
    End--(Elapsed Time: 02:03, VBatt start/end: 13.3/13.3 Vign: 0.0)-
    Last edited by Uwe; 07-29-2019 at 10:21 AM. Reason: CODE tags

  2. #2
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    24,960
    Post Thanks / Like
    Blog Entries
    1
    Moving to HEX-NET support.

    -Uwe-
    The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.

  3. #3
    Ross-Tech Employee
    Join Date
    Jan 2014
    Location
    USA
    Posts
    851
    Post Thanks / Like
    I've switched your interface to the alpha channel, where there is a new update. Please download this update and then try again and see if that helps.

  4. Likes Uwe liked this post
  5. #4
    Verified VCDS User
    Join Date
    Dec 2015
    Location
    Greece
    Posts
    32
    Post Thanks / Like
    Quote Originally Posted by Shaun View Post
    I've switched your interface to the alpha channel, where there is a new update. Please download this update and then try again and see if that helps.
    Did the update!

    Although I see a message getvin timeout!

  6. #5
    Verified VCDS User PetrolDave's Avatar
    Join Date
    Dec 2014
    Location
    South Molton, UK
    Posts
    2,436
    Post Thanks / Like
    Quote Originally Posted by skoukiadakis View Post
    Although I see a message getvin timeout!
    I've been seeing that message for as long as I can remember, but my HEX-NET works OK

  7. Likes Uwe liked this post
  8. #6
    Verified VCDS User
    Join Date
    Dec 2015
    Location
    Greece
    Posts
    32
    Post Thanks / Like
    Quote Originally Posted by Shaun View Post
    I've switched your interface to the alpha channel, where there is a new update. Please download this update and then try again and see if that helps.
    Do I have to switch my interface to beta channel or not?

  9. #7
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    24,960
    Post Thanks / Like
    Blog Entries
    1
    Quote Originally Posted by skoukiadakis View Post
    Do I have to switch my interface to beta channel or not?
    No. Alpha is an update channel you can't switch to yourself. When someone from Ross-Tech tells you they've put you on Alpha, switching back down to Beta or Release just is counter-productive! I see you've done exactly that, but without updating your interface.

    I've just put you back on Alpha again. Please check for updates. You should get CB version 4513. Once you have that, please try updating your ROD/ASAM data again.

    -Uwe-
    The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.

  10. Likes Eric, gawied liked this post
  11. #8
    Verified VCDS User
    Join Date
    Dec 2015
    Location
    Greece
    Posts
    32
    Post Thanks / Like
    Quote Originally Posted by Uwe View Post
    No. Alpha is an update channel you can't switch to yourself. When someone from Ross-Tech tells you they've put you on Alpha, switching back down to Beta or Release just is counter-productive! I see you've done exactly that, but without updating your interface.

    I've just put you back on Alpha again. Please check for updates. You should get CB version 4513. Once you have that, please try updating your ROD/ASAM data again.

    -Uwe-
    Thanks for helping!

    Did the update.Now i have CB version 4513.

    Now when I will plug it to the car,if any updates,i must install them with VCDS mobile or with VCDS configurator?

  12. #9
    Verified VCDS User Zenerdiode's Avatar
    Join Date
    Jun 2014
    Location
    Newcastle, England
    Posts
    952
    Post Thanks / Like
    Use either. But remember, don’t touch the Beta or Release channel switcher in VCI-Config.

  13. Likes gawied, Uwe liked this post
  14. #10
    Verified VCDS User
    Join Date
    Dec 2015
    Location
    Greece
    Posts
    32
    Post Thanks / Like
    Quote Originally Posted by Zenerdiode View Post
    Use either. But remember, donít touch the Beta or Release channel switcher in VCI-Config.
    Thank you!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •