Page 2 of 2 FirstFirst 12
Results 11 to 15 of 15

Thread: 2005 Audi A8L Basic settings help

  1. #11
    Verified VCDS User
    Join Date
    Jul 2019
    Location
    Canada
    Posts
    7
    Post Thanks / Like
    Will do, very appreciated for the help. Will get back with an update in a day.

  2. #12
    Verified VCDS User
    Join Date
    Apr 2016
    Location
    United Kingdom
    Posts
    150
    Post Thanks / Like
    Telephone can not be reached, this module is on most loop so maybe the whole mmi is down. Get an optical loop connector to by - pass the telephone. Also perform an optical test with vcds.

  3. #13
    Verified VCDS User
    Join Date
    Jul 2019
    Location
    Canada
    Posts
    7
    Post Thanks / Like
    Can I just disable the phone in MMI settings?

  4. #14
    NostraJackAss Jack@European_Parts's Avatar
    Join Date
    Jan 2014
    Location
    1001 State Route 17K Montgomery New York 12549
    Posts
    16,180
    Post Thanks / Like
    Did you spill your tasty beverage into the MMI? if so take apart and clean with TV tuner cleaner and dry out.

    If not do get a loop bypass to isolate systems for diagnosis path aforementioned or using RTFB.
    European Parts Emporium/Performance / Immobilizer Solutions EPE
    Certified Master Trained NY/BAR/BAD 7076062/ASE/SAE/NASTF Legal Factory Authorized/Licensed GeKo/FaZit # 403738
    Specializing in Custom Services IE: "welding-fabrication" / EPA-SMOG Update or Pass-Thru-Programming / Data Transfer / Immobilizers & OEM Quality Parts
    Above Magic! No Written record, AUTO-SCAN or Appointment = NO HELP!
    www.FixMyEuro.com <<<<<CLICK HERE! or vwemporium@aol.com ( JPPSG & Unverified members need not PM me & Please don't email or call facility for free tech support...use the forum )
    Getting you CONTROL again of your property - TAKE IT! In Conjunction with.........

  5. #15
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    23,870
    Post Thanks / Like
    Blog Entries
    1
    Quote Originally Posted by mattylondon View Post
    Telephone can not be reached, this module is on most loop so maybe the whole mmi is down.
    Nah, all the stuff on the whole ring would show "Cannot be Reached" if that was the problem.

    -Uwe-
    The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •