Results 1 to 4 of 4

Thread: VCDS with HexNet freezes while adaptations reading of MIB3 5F

  1. #1
    Verified VCDS User
    Join Date
    Mar 2014
    Location
    Europe
    Posts
    87
    Post Thanks / Like

    VCDS with HexNet freezes while adaptations reading of MIB3 5F

    Hello,

    I'm experiencing communications errors with latest MIB3 units. Finishing a complete autoscan with debug level 2 of the vehicle is not possible, as VCDS crashes on reading adaptations of 5F. First it starts writing "Sporadic communication error" then freezes and crashes.
    First I noticed this late February 2019 when the first cars with MIB3 came. At that time I used VCDS 19.2.1. I tried this week again with the latest 19.6.1 and the same problem. The HexNet is always updated to the latest version, connected in AP wireless mode. Out of curiosity I tried USB connection, same behaviour.
    Any idea how to finish reading complete adaptations of MIB3 5F?

  2. #2
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    23,854
    Post Thanks / Like
    Blog Entries
    1
    [Options]
    Set Debug Level to 1024
    [Apply]
    [Applications]
    [Controller Channel Maps]
    Try to make the map you're having trouble with.
    After it fails, look in the Debug folder. There should be a file named DEBUG-5F.DLM.
    E-mail it to Support along with a link to this thread.

    -Uwe-
    The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.

  3. Likes icardiag liked this post
  4. #3
    VCDS Distributor
    Join Date
    Feb 2014
    Location
    Denmark
    Posts
    1,680
    Post Thanks / Like
    Internal, also FS#1525.

  5. Likes Uwe, Dana liked this post
  6. #4
    Verified VCDS User
    Join Date
    Mar 2014
    Location
    Europe
    Posts
    87
    Post Thanks / Like
    Log files were mailed to support few minutes ago

    I was able to make a succesful adaptation map, but it took way toooo long. VCDS kept not responding several times, I didn't touch it and let it be but in the end it didn't crash. However getting measurement values caused app crash somewhere around #230 and with several attempts I was not able to make a complete dump of measurement values. I tried several cars although with same MIB3 with the same SW version, same situation.

  7. Likes Dana liked this post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •