Changes to speed alert function - tones and MFD message

n70 · Jul 6, 2019

I have a Volkswagen Transporter (first registered December 2018 so it's a new model).

Here's the autoscan. I hope I got this right as I haven't done it before.

Code:

Saturday,06,July,2019,19:13:30:57566
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64
VCDS Version: 19.6.1.0 (x64)  HEX-V2 CB: 0.4508.4
Data version: 20190529 DS308.0
www.Ross-Tech.com


VIN: WV1ZZZ7HZKH045XXX   License Plate: XXXXXXX
Mileage: 26380km-16391mi   Repair Order: 


Chassis Type: 7H-VN75 (7E0)
Scan: 01 03 04 08 09 10 13 15 17 19 25 5F 61 0B

VIN: WV1ZZZ7HZKH045729   Mileage: 26380km-16391miles

01-Engine -- Status: Malfunction 0010
03-ABS Brakes -- Status: OK 0000
04-Steering Angle -- Status: OK 0000
08-Auto HVAC -- Status: OK 0000
09-Cent. Elect. -- Status: OK 0000
10-Park/Steer Assist -- Status: OK 0000
13-Auto Dist. Reg -- Status: OK 0000
15-Airbags -- Status: OK 0000
17-Instruments -- Status: OK 0000
19-CAN Gateway -- Status: OK 0000
25-Immobilizer -- Status: OK 0000
5F-Information Electr. -- Status: Malfunction 0010
61-Battery Regul. -- Status: OK 0000
-------------------------------------------------------------------------------
Address 01: Engine (2D2D2-CXGB)       Labels:. 04L-907-309-V2.clb
   Part No SW: 04L 906 056 KA    HW: 04L 907 445 
   Component: R4 2.0l TDI   H02 4047  
   Revision: 23002001    
   Coding: 00114014430401090000
   Shop #: WSC 00012 790 50316
   ASAM Dataset: EV_ECM20TDI03004L906056KA 004003
   ROD: EV_ECM20TDI03004L906056KA.rod
   VCID: 76B5E7C998493057E05-8022

2 Faults Found:
31103 - SCR NOx Catalyst Bank 1 
          P20EE 00 [096] - Efficiency too Low
          Intermittent - Not Confirmed - Tested Since Memory Clear

30540 - Throttle Position Sensor (G69) 
          P0121 00 [032] - Implausible Signal
          Intermittent - Not Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 2
                    Fault Frequency: 1
                    Mileage: 25854 km
                    Date: 2007.01.13
                    Time: 20:49:41

                    Engine speed: 0.00 /min
                    Normed load value: 0.0 %
                    Vehicle speed: 0 km/h
                    Coolant temperature: 29 °C
                    Intake air temperature: 41 °C
                    Ambient air pressure: 1010 mbar
                    Voltage terminal 30: 12.039 V
                    Unlearning counter according OBD: 32
                    Mass airflow sensor 1 bank 1 airflow: raw value: 0.0 mg/stroke
                    Throttl.valve adapt. 1 bank 1: posit feedback - Spec.value: 4.46 %
                    Throttl.valve adapt. 1 bank 1: posit feedback - Act.value: 100.00 %
                    Throttl.valve adapt. 1 bank 1: posit feedback - Offset closed: 0.27 %
                    Throttl.valve adapt. 1 bank 1: posit feedback - Uncnd vlt: 4.745 V

Readiness: N/A

-------------------------------------------------------------------------------
Address 03: ABS Brakes (J104)       Labels: 7E0-907-37x-MK100ESC.clb
   Part No SW: 7E0 907 379 P    HW: 7E0 907 379 M
   Component: ESC           H06 0133  
   Revision: 00000000    Serial number: 62958000002401
   Coding: 557E409825668483AA7C0278A48B21E679F100
   Shop #: WSC 00012 790 50316
   ASAM Dataset: EV_Brake1ESCCONTIVN75XGP2 011001
   ROD: EV_Brake1ESCCONTIVN75XGP2_011.rod
   VCID: 3FDB42EDF7F3B11FF33-806A

No fault code found.

-------------------------------------------------------------------------------
Address 04: Steering Angle (G085)       Labels:* 6R0-959-654.clb
   Part No SW: 6R0 959 654     HW: 6R0 959 654 
   Component: LENKW.SENSOR  H07 0070  
   Serial number: 16101813471746
   Coding: 01
   Shop #: WSC 00000 000 00000
   ASAM Dataset: EV_LWSKLOVW25X 005001
   ROD: EV_LWSKLOVW25X.rod
   VCID: 7EA5FFE9B0797817B85-802A

No fault code found.

-------------------------------------------------------------------------------
Address 08: Auto HVAC (J301)       Labels:| 7E5-907-047.clb
   Part No SW: 7E0 907 047 AK    HW: 7E0 907 047 AK
   Component: Climatic-T5   H22 0708  
   Revision: 00001002    
   Coding: 0000000003
   Shop #: WSC 00012 790 50316
   ASAM Dataset: EV_ClimaticT5 A01003
   ROD: EV_ClimaT5Basis.rod
   VCID: 73B3DEDD8B3B257FC7B-8026

No fault code found.

-------------------------------------------------------------------------------
Address 09: Cent. Elect. (J519)       Labels:. 7E0-937-BCM-V1.clb
   Part No SW: 7E0 937 090 D    HW: 7E0 937 090 D
   Component: BCM PQ25 Max4 H82 0762  
   Revision: B9082001    Serial number: 8601 299180734
   Coding: A0A4303A0A613431922049742C2B8C540F00708F60464D60330400220800
   Shop #: WSC 66305 512 174625
   VCID: 2C0105A116053A87461-8078

   Subsystem 1 - Part No SW: 7E0 959 801 P    HW: 7E0 959 801 P
   Component: J386__TSG_FT  004 0653 
   Serial number: KU0KU017101882902192
   Coding: 1400B0

   Subsystem 2 - Part No SW: 7E0 959 802 P    HW: 7E0 959 802 P
   Component: J387__TSG_BT  004 0653 
   Serial number: KU0KU019101882921415
   Coding: 0400A0

   Subsystem 3 - Part No: 7E1 951 172 
   Component: DWA-Sensor 00  001 0104 
   Coding: 000000

   Subsystem 4 - Part No: 1K0 951 605 F
   Component: LIN BACKUP HO  H01 0009 
   Coding: 000000

   Subsystem 5 - Part No: 7E1 951 172 
   Component: DWA-Sensor 00  001 0104 
   Coding: 000000

No fault code found.

-------------------------------------------------------------------------------
Address 10: Park/Steer Assist (J446)       Labels:| 7E0-919-475.clb
   Part No SW: 7E0 919 475 T    HW: 1Q0 919 475 
   Component: PARKHILFE 4K  H03 0212  
   Revision: --------    Serial number: 32961821504077
   Coding: 10800A
   Shop #: WSC 00012 790 50316
   ASAM Dataset: EV_VW75XParkAssis4K 001013
   ROD: EV_VW75XParkAssis4K_001.rod
   VCID: 43D34E1D9B1BD5FF97B-8016

No fault code found.

-------------------------------------------------------------------------------
Address 13: Auto Dist. Reg (J428)       Labels:| 7N0-907-572.clb
   Part No SW: 7N0 907 572 C    HW: 7E0 907 572 
   Component: ACC Bosch PQx H03 0211  
   Serial number: 1110180453B2E5
   Coding: 00004000FE1779
   Shop #: WSC 01383 790 50316
   ASAM Dataset: EV_ACCBEGVW361 001006
   ROD: EV_ACCBEGVW361_VW32.rod
   VCID: 363527C9D8C97057205-8062

No fault code found.

-------------------------------------------------------------------------------
Address 15: Airbags (J234)       Labels:| 5K0-959-655.clb
   Part No SW: 7E0 959 655 J    HW: 7E0 959 655 J
   Component: VW10Airbag021 010 0018  
   Revision: --------    Serial number: 003EK002Y31Y
   Coding: 000000000000000000000000000000003231
   Shop #: WSC 00012 790 50316
   ASAM Dataset: EV_AirbaVW10BPAVW12X 001028
   ROD: EV_AirbaVW10BPAVN750_VW12.rod
   VCID: 3D2738E5FDFFA30FE1F-8068

No fault code found.

-------------------------------------------------------------------------------
Address 17: Instruments (J285)       Labels:| 5K0-920-xxx-17.clb-SRI1
   Part No SW: 7E0 920 971 A    HW: 7E0 920 971 A
   Component: KOMBI         H02 2030  
   Serial number: 00000000000000
   Coding: 1509010300
   Shop #: WSC 00012 790 50316
   ASAM Dataset: EV_Kombi_UDS_VDD_RM09 A05736
   ROD: EV_Kombi_UDS_VDD_RM09_005_VW25.rod
   VCID: 290FFCB519772FAFBD7-807C

No fault code found.

-------------------------------------------------------------------------------
Address 19: CAN Gateway (J533)       Labels:. 7E0-909-901.clb
   Part No SW: 7E0 909 901     HW: 7E0 937 090 D
   Component: GW-K-CAN TP20 H82 0762  
   Revision: B9082001    
   Coding: 042305
   Shop #: WSC 66305 512 174625
   VCID: 6889B9B1C27DD6A7629-803C

No fault code found.

-------------------------------------------------------------------------------
Address 25: Immobilizer (J334)       Labels:| 5K0-920-xxx-25.clb
   Part No SW: 5K0 953 234     HW: 5K0 953 234 
   Component: IMMO          H02 2030  
   Serial number:               
   Coding: 000002
   Shop #: WSC 00012 790 50316
   ASAM Dataset: EV_Immo_UDS_VDD_RM09 A03710
   ROD: EV_Immo_UDS_VDD_RM09.rod
   VCID: 6A8DC3B9DCF1E4B774D-803E

No fault code found.

-------------------------------------------------------------------------------
Address 5F: Information Electr. (J794)       Labels:| 5G0-035-MIB-ENT2.clb
   Part No SW: 1K8 035 150 L    HW: 1K8 035 150 L
   Component: MU-E-D-ER     056 7205  
   Serial number: 01101800011568
   Coding: 065700003C00000041111101008000001F0000C60000010001
   Shop #: WSC 00012 790 50316
   ASAM Dataset: EV_MUEnt4CGen2LGE 001032
   ROD: EV_MUEnt4CGen2LGE_VW12.rod
   VCID: 2E050FA920994897685-807A

2 Faults Found:
0001 - Antenna 1 for Radio 
          B1119 13 [009] - Open Circuit
          Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 6
                    Fault Frequency: 1
                    Reset counter: 174
                    Mileage: 25482 km
                    Date: 2019.06.29
                    Time: 14:56:46

                    Voltage terminal 30: 12.3 V

0003 - Antenna 2 for radio 
          B111A 13 [009] - Open Circuit
          Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 6
                    Fault Frequency: 1
                    Reset counter: 174
                    Mileage: 25482 km
                    Date: 2019.06.29
                    Time: 14:56:46

                    Voltage terminal 30: 12.3 V


-------------------------------------------------------------------------------
Address 61: Battery Regul. (J840)       Labels:. 1K0-907-534.clb
   Part No SW: 7E0 907 534     HW: 7E0 937 090 D
   Component: Batt.regelung H82 0762  
   Serial number: 8601 299180734
   Coding: 030B7A73
   Shop #: WSC 00012 790 00034
   VCID: 6889B9B1C27DD6A7629-803C

   Subsystem 1 - Part No SW: 7E0 915 181 K    HW: 7E0 915 181 K
   Component: J367-BDMConti  H03 1050 
   Serial number: 7588570100180928092A

No fault code found.

End----------(Elapsed Time: 01:33, VBatt start/end: 12.1V/12.1V)-----------

The speed alert function is useful for keeping me from getting a speeding ticket, but I would like to alter it to make it more effective.

Here are the details of what I'd like to change.

When I exceed the set speed it chimes once and the speed limit exceeded message comes up on the MFD and stays up until I drop below the set speed.

Since I have the big digital speedo enabled (courtesy of VCDS) I would like to no longer have the speed limit exceeded text stay on the screen, as it blocks my view of the digital speed readout.

Instead I'd like to have the chime repeat at a set interval (say every 5 to 10 seconds) until I drop below the speed limit I've set.

Can the above be done??

Uwe · Jul 6, 2019

I doubt it. The only thing that strikes me as relevant in your instrument cluster is this Adaptation channel:

IDE03348-ENG98597 -- Speed warning - Speed warning (not active, active, Not available)

-Uwe-

n70 · Jul 6, 2019

Ok thanks for replying. Remember I'm new so looking for confirmation of what seems obvious.

That means my only options are to have it switched on or switched off?

Uwe · Jul 6, 2019

n70 said:
That means my only options are to have it switched on or switched off?

That's the only option that's obvious to me.

But I don't claim to know everything.

-Uwe-

n70 · Jul 7, 2019

I'm sure if that's all you can see, that's all there is.

Can I just check something so I understand. VCDS will give me the option to change any option that the manufacturer coded in, but it won't allow you to do anything they completely did not intend?

What I mean is, you couldn't use it to take a piece of their hardware and completely recode (hack it I suppose) to do something very different. I am not any kind of programmer anyway, I'm just trying to understand the capabilities of the VCDS system, as when I first looked at guides I read much about coding and thought it was maybe as free as someone writing new code when creating an android app, windows program, etc.

Uwe · Jul 7, 2019

Yes, the car and control module manufacturers make certain things configurable via the diagnostic API, generally via the Coding or Adaptation functions. VCDS can change those values. But it cannot change things that the manufacturers did not intend to be configurable, i.e. it cannot make arbitrary changes to the function of a module.

-Uwe-

n70 · Jul 8, 2019

Thanks for clarifying. I just wanted to understand a bit more about what can and cannot be done.

Changes to speed alert function - tones and MFD message

n70

Verified VCDS User

Uwe

Benevolent Dictator

n70

Verified VCDS User

Uwe

Benevolent Dictator

n70

Verified VCDS User

Uwe

Benevolent Dictator

n70

Verified VCDS User