Results 1 to 1 of 1

Thread: Volkswagen/Audi "Standardized" Measuring Block Groups for Gasoline Engines

  1. #1
    Ross-Tech Employee Jef's Avatar
    Join Date
    Jan 2014
    Location
    HQ
    Posts
    1,963
    Post Thanks / Like

    Volkswagen/Audi "Standardized" Measuring Block Groups for Gasoline Engines

    https://www.ross-tech.com/vag-com/m_blocks/

    A hidden gem of info on our web site for measuring block data on gas engines from 2000-ish to 2010-ish.

    This info only applies to non-UDS control modules.

    This is also a good time to point out, VCDS only sends a request and shows the response. Different control modules are engineered/designed differently so you can come across variations of data. The listing there will have different versions of info for a given group number. Example:

    https://www.ross-tech.com/vag-com/m_blocks/090-098.html

    There are 3 variations of group 090, and then 2 variations of groups 091, 092, 093, 094, 095 and 096. Which version your car might have depends on how the Germans designed that specific control module... VCDS just sends a request to view data in group XXX and shows you the response.
    Last edited by Jef; 06-26-2019 at 02:58 PM.
    Jef
    Ross Tech Support Team, Alpha Squad
    Auto-Scan, learn it, love it, live it... then check the fuses.

  2. Likes Bruce, Uwe, D-Dub, PetrolDave liked this post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •