Page 2 of 2 FirstFirst 12
Results 11 to 13 of 13

Thread: ABS Fault 00285

  1. #11
    Verified VCDS User
    Join Date
    Jun 2019
    Location
    USA
    Posts
    7
    Post Thanks / Like
    Quote Originally Posted by Jack@European_Parts View Post
    Okay great OP.

    See the T26 designation?

    That's the plug at ABS module known as AKA J104 or in VCDS as hex address word 0x03





    Don't worry about the D186 or 187 & commence a check with DVOM and load light to ABS connector T26a PIN 5 & 6 and should correlate to PIN's 1 & 2 at ABS G45 sensor, understand?
    I see...pin 5 and pin 6...duh. I should have figured that out.
    I want to check continuity from pin 5 to #1 and pin 6 to #2, right?

  2. Likes Uwe, NZDubNurd liked this post
  3. #12
    NostraJackAss Jack@European_Parts's Avatar
    Join Date
    Jan 2014
    Location
    1001 State Route 17K Montgomery New York 12549
    Posts
    15,708
    Post Thanks / Like
    I see...pin 5 and pin 6...duh. I should have figured that out.
    I want to check continuity from pin 5 to #1 and pin 6 to #2, right?

    Yeah it's only two wires ya dope

    Not just continuity,,,,,,nein! because one stand of copper can make a tone and not carry the current needed for the controller to read the voltage of wheel speed, that is why load light!

    Meet MR. 123 LOAD LIGHT's in this 2 min video....

    European Parts Emporium/Performance / Immobilizer Solutions EPE
    Certified Master Trained NY/BAR/BAD 7076062/ASE/SAE/NASTF Legal Factory Authorized/Licensed GeKo/FaZit # 403738
    Specializing in Custom Services IE: "welding-fabrication" / EPA-SMOG Update or Pass-Thru-Programming / Data Transfer / Immobilizers & OEM Quality Parts
    Above Magic! No Written record, AUTO-SCAN or Appointment = NO HELP!
    www.FixMyEuro.com <<<<<CLICK HERE! or vwemporium@aol.com ( JPPSG & Unverified members need not PM me & Please don't email or call facility for free tech support...use the forum )
    Getting you CONTROL again of your property - TAKE IT! In Conjunction with.........

  4. Likes Uwe, tclark18 liked this post
  5. #13
    Verified VCDS User
    Join Date
    Jun 2019
    Location
    USA
    Posts
    7
    Post Thanks / Like
    I was expecting a diagram of the plug to know which pins to check....got it now.

    Thank you for the information about how to load test the wire. I need that.

    I will check it out next opportunity. Thanks.

  6. Likes Uwe, NZDubNurd liked this post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •