Audi S8 V10 - Measuring Blocks for Knock Control

   #1  

BatManv8v

Verified VCDS User
Verified
Joined
Nov 24, 2018
Messages
14
Reaction score
1
Location
South Africa
VCDS Serial number
C?ID=355187
I am pulling data from MB 020 for ignition angle retard.

It gives me values for Cylinders 1, 2, 3 and 4. Same thing for the 2nd ECU providing values for 6,7, 8 and 9.

However, I need the values for Cylinders 5 and 10 respectively. Are they in another measuring block?

Thanks in advance.
 
   #2  

_Val

Verified VCDS User
Verified
Joined
Nov 7, 2017
Messages
191
Reaction score
144
Location
Latvia
VCDS Serial number
C?ID=356659
What does label file "say"? It's not it 021?
Possibly, provide us with ECU part numbers so we don't need to check ETKA.
 
   #3  

Uwe

Benevolent Dictator
Administrator
Joined
Jan 29, 2014
Messages
48,925
Reaction score
33,652
Location
USA
VCDS Serial number
HC100001
Code:
Address 01: Engine        Labels: Redir Fail!
   Part No SW: 4E0 910 552 B    HW: 4E0 907 552 
   Component: 5.2L V10/4V FSI    ª0050  
   Revision: 5AH11---    Serial number: AUX3Z0FN110921
   Coding: 01060000190F0960
   Shop #: WSC 01642 996 72817
   VCID: 214F07F8F83A2542FA-8074
Yup, cylinder 5 should be in 021.1 of ECU 1 and I would expect 10 to be in 021.1 of ECU 2.

-Uwe-
 
Back
Top