Results 1 to 3 of 3

Thread: Audi S8 V10 - Measuring Blocks for Knock Control

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Verified VCDS User
    Join Date
    Nov 2018
    South Africa
    Post Thanks / Like

    Audi S8 V10 - Measuring Blocks for Knock Control

    I am pulling data from MB 020 for ignition angle retard.

    It gives me values for Cylinders 1, 2, 3 and 4. Same thing for the 2nd ECU providing values for 6,7, 8 and 9.

    However, I need the values for Cylinders 5 and 10 respectively. Are they in another measuring block?

    Thanks in advance.
    2007 Audi S8 V10 5.2 - 8 is enough? No!

  2. #2
    Verified VCDS User
    Join Date
    Nov 2017
    Post Thanks / Like
    What does label file "say"? It's not it 021?
    Possibly, provide us with ECU part numbers so we don't need to check ETKA.

  3. #3
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Post Thanks / Like
    Blog Entries
    Quote Originally Posted by BatManv8v View Post
    Address 01: Engine        Labels: Redir Fail!
       Part No SW: 4E0 910 552 B    HW: 4E0 907 552 
       Component: 5.2L V10/4V FSI    0050  
       Revision: 5AH11---    Serial number: AUX3Z0FN110921
       Coding: 01060000190F0960
       Shop #: WSC 01642 996 72817
       VCID: 214F07F8F83A2542FA-8074
    Yup, cylinder 5 should be in 021.1 of ECU 1 and I would expect 10 to be in 021.1 of ECU 2.

    The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts