Results 1 to 9 of 9

Thread: Golf non start, needs keys recoded?

  1. #1
    New User
    Join Date
    Aug 2016
    Location
    UK
    Posts
    19
    Post Thanks / Like

    Golf non start, needs keys recoded?

    Car starts and then stops, had a load of can faults, checked the gateway as had issues with them before alltho never non starters, found pins broken (main live in and a few others). repaired plug and replaced with a new gateway.
    Cant communicate with the gateway and the fans are running as soon as ignition put on. Further wiring issues or lost immobiliser coding??

    Code:
    Thursday,07,September,2017,15:30:25:61714
    VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x86
    VCDS Version: 17.8.0.1
    Data version: 20170721 DS276.2
    www.Ross-Tech.com
    
    
    
    
    Chassis Type: 1K (9M - VW Jetta IV (1998 > 2014))
    Scan: 01 02 03 08 09 15 16 17 19 22 29 35 36 37 39 46 47 55 56 57
              75 76
     
    VIN: WVWZZZ1KZ8M349808   
    -------------------------------------------------------------------------------
    Address 01: Engine        Labels: 03G-906-016-BKC.clb
       Part No SW: 03G 906 021 PM    HW: 03G 906 021 AN
       Component: R4 1,9L EDC G000SG  1136  
       Revision: --H07---    Serial number: VWX7Z0GN24E0O1
       Coding: 0000071
       Shop #: WSC 00066 000 00000
       VCID: 79F23A993328408ECD-5102
    
    8 Faults Found:
    005712 - Powertrain Data Bus 
                   P1650 - 000 - Missing Message from Instrument Cluster
                 Freeze Frame:
                        Fault Status: 01100000
                        Fault Priority: 3
                        Fault Frequency: 13
                        Reset counter: 255
                        Time Indication: 0
    
                 Freeze Frame:
                        RPM: 0 /min
                        Speed: 0.0 km/h
                        Load: 0.0 %
                        Voltage: 11.63 V
                        Bin. Bits: 11001100
                        Torque: 0.0 Nm
                        Torque: 351.4 Nm
    
    005785 - Powertrain Data Bus 
                   P1699 - 000 - Missing Message from Steering Wheel Electronics
                 Freeze Frame:
                        Fault Status: 01100000
                        Fault Priority: 3
                        Fault Frequency: 13
                        Reset counter: 255
                        Time Indication: 0
    
                 Freeze Frame:
                        RPM: 0 /min
                        Speed: 0.0 km/h
                        Load: 0.0 %
                        Voltage: 11.63 V
                        Bin. Bits: 11001100
                        Bin. Bits: 00000000
                        (no units): 0.0
    
    049478 - No Communication with Diagnostic Gateway 
                   U0146 - 000 - 
                 Freeze Frame:
                        Fault Status: 01100000
                        Fault Priority: 3
                        Fault Frequency: 13
                        Reset counter: 255
                        Time Indication: 0
    
                 Freeze Frame:
                        RPM: 0 /min
                        Speed: 0.0 km/h
                        Load: 0.0 %
                        Voltage: 11.63 V
                        Bin. Bits: 11001100
                        Bin. Bits: 00000000
                        (no units): 0.0
    
    006272 - Powertrain Data Bus 
                   P1880 - 000 - Missing Message from Diagnostic Gateway
                 Freeze Frame:
                        Fault Status: 01100000
                        Fault Priority: 3
                        Fault Frequency: 10
                        Reset counter: 255
                        Time Indication: 0
    
                 Freeze Frame:
                        RPM: 0 /min
                        Speed: 0.0 km/h
                        Load: 0.0 %
                        Voltage: 11.63 V
                        Bin. Bits: 11001100
                        Bin. Bits: 00000000
                        (no units): 0.0
    
    005785 - Powertrain Data Bus 
                   P1699 - 000 - Missing Message from Steering Wheel Electronics
                 Freeze Frame:
                        Fault Status: 01100000
                        Fault Priority: 3
                        Fault Frequency: 13
                        Reset counter: 255
                        Time Indication: 0
    
                 Freeze Frame:
                        RPM: 0 /min
                        Speed: 0.0 km/h
                        Load: 0.0 %
                        Voltage: 11.63 V
                        Bin. Bits: 11001100
                        Bin. Bits: 00000000
                        (no units): 0.0
    
    005685 - Powertrain Data Bus 
                   P1635 - 000 - Missing Message from A/C Controller
                 Freeze Frame:
                        Fault Status: 01100000
                        Fault Priority: 3
                        Fault Frequency: 10
                        Reset counter: 255
                        Time Indication: 0
    
                 Freeze Frame:
                        RPM: 0 /min
                        Speed: 0.0 km/h
                        Load: 0.0 %
                        Voltage: 11.63 V
                        Bin. Bits: 11001100
                        Bin. Bits: 00000000
                        (no units): 16.0
    
    053273 - Control Module for Instrument Cluster 
                   U1019 - 000 - Missing Signal for Oil Level/Temperature
                 Freeze Frame:
                        Fault Status: 01100000
                        Fault Priority: 3
                        Fault Frequency: 5
                        Reset counter: 255
                        Time Indication: 0
    
                 Freeze Frame:
                        RPM: 0 /min
                        Speed: 0.0 km/h
                        Load: 0.0 %
                        Voltage: 11.63 V
                        Bin. Bits: 11001100
                        Bin. Bits: 00000000
                        (no units): 0.0
    
    005488 - Engine Start Blocked by Immobilizer 
                   P1570 - 000 -  - MIL ON
                 Freeze Frame:
                        Fault Status: 11110000
                        Fault Priority: 1
                        Fault Frequency: 1
                        Reset counter: 255
                        Time Indication: 0
    
                 Freeze Frame:
                        RPM: 1008 /min
                        Speed: 0.0 km/h
                        Load: 0.0 %
                        Voltage: 11.70 V
                        Bin. Bits: 00001100
                        Bin. Bits: 11000000
                        (no units): 33.0
    
    Readiness: 0 0 0 0 1 
    
    End-------------------------(Elapsed Time: 06:06)--------------------------
    Last edited by Uwe; 09-07-2017 at 10:00 AM. Reason: CODE tags

  2. #2
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    26,911
    Post Thanks / Like
    Blog Entries
    1
    Looks like a CAN bus communications problem. ECU responded via K-Line, not via CAN. Why did you choose to scan it as a 9M when the chassis type is 1K?

    What happens when you scan this car using Auto-Detect as the chassis type?

    -Uwe-

    PS: Please Get Verified.
    The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.

  3. #3
    New User
    Join Date
    Aug 2016
    Location
    UK
    Posts
    19
    Post Thanks / Like
    Quote Originally Posted by Uwe View Post
    Looks like a CAN bus communications problem. ECU responded via K-Line, not via CAN. Why did you choose to scan it as a 9M when the chassis type is 1K?

    What happens when you scan this car using Auto-Detect as the chassis type?

    -Uwe-

    PS: Please Get Verified.



    auto detect comes up function not supported by the gateway as does selecting the proper 1k model.

    Could it be the gateway needs programmed by vw (although ive changed them before with no issues in communicating and coding) or could it be the wrong gateway? (was supplied by VW)

    Also ive tried registering properly in the past and we don't have enough info, the serial number is long since rubbed of the plug and certificate is gone. Its probably over 10 years old.

  4. #4
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    26,911
    Post Thanks / Like
    Blog Entries
    1
    Have you checked power and ground to the CAN Gateway?

    -Uwe-
    The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.

  5. #5
    New User
    Join Date
    Aug 2016
    Location
    UK
    Posts
    19
    Post Thanks / Like
    Quote Originally Posted by Uwe View Post
    Have you checked power and ground to the CAN Gateway?

    -Uwe-
    Yes all present and correct

  6. #6
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    26,911
    Post Thanks / Like
    Blog Entries
    1
    Quote Originally Posted by burnbrae View Post
    Yes all present and correct
    And CAN bus connections between diagnostic socket and Gateway? Because if the Gateway has both switched and unswitched power, ground, and both can wires to the diagnostic socket, it should talk. If it does not, I would be tempted to swap in another Gateway; they're pretty inexpensve....

    -Uwe-
    The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.

  7. #7
    New User
    Join Date
    Aug 2016
    Location
    UK
    Posts
    19
    Post Thanks / Like
    OK so its up and running now, problem was id been a muppet and put the main live back into pin 2 slot instead of 1 after repairing the plug.......

    Next question what would the long coding be for a mk5 golf estate RHD? And then as I was unable to view the selected options in the old gateway do I just select the ones that are throwing up faults as not registered?

    Code:
    Friday,08,September,2017,15:25:22:61714
    VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x86
    VCDS Version: 17.8.0.1
    Data version: 20170721 DS276.2
    www.Ross-Tech.com
    
    
    VIN: WVWZZZ1KZ8M349808   License Plate: 
    
    
    Chassis Type: 1K (7N0)
    Scan: 01 03 08 09 15 16 17 19 25 42 44 46 52 56 62 72
    
    VIN: WVWZZZ1KZ8M349808   Mileage: 211850km-131637miles
    
    01-Engine -- Status: Not registered 0011
    03-ABS Brakes -- Status: OK 0000
    04-Steering Angle -- Status: Not registered 0001
    08-Auto HVAC -- Status: Not registered 0011
    09-Cent. Elect. -- Status: Not registered 0011
    15-Airbags -- Status: Not registered 0011
    16-Steering wheel -- Status: Not registered 0001
    17-Instruments -- Status: Not registered 0001
    19-CAN Gateway -- Status: Malfunction 0010
    25-Immobilizer -- Status: Not registered 0001
    42-Door Elect, Driver -- Status: Not registered 0001
    44-Steering Assist -- Status: Not registered 0001
    46-Central Conv. -- Status: Not registered 0011
    52-Door Elect, Pass. -- Status: Not registered 0001
    56-Radio -- Status: Not registered 0001
    62-Door, Rear Left -- Status: Not registered 0001
    72-Door, Rear Right -- Status: Not registered 0001
     
    -------------------------------------------------------------------------------
    Address 01: Engine        Labels: 03G-906-016-BKC.clb
       Part No SW: 03G 906 021 PM    HW: 03G 906 021 AN
       Component: R4 1,9L EDC G000SG  1136  
       Revision: --H07---    Serial number: VWX7Z0GN24E0O1
       Coding: 0000071
       Shop #: WSC 00066 000 00000
       VCID: 79F23A993028408ECD-802C
    
    8 Faults Found:
    005712 - Powertrain Data Bus 
                   P1650 - 000 - Missing Message from Instrument Cluster - Intermittent
                 Freeze Frame:
                        Fault Status: 00100000
                        Fault Priority: 3
                        Fault Frequency: 5
                        Reset counter: 255
                        Time Indication: 0
    
                 Freeze Frame:
                        RPM: 0 /min
                        Speed: 0.0 km/h
                        Load: 0.0 %
                        Voltage: 11.93 V
                        Bin. Bits: 11001100
                        Torque: 0.0 Nm
                        Torque: 351.4 Nm
    
    005785 - Powertrain Data Bus 
                   P1699 - 000 - Missing Message from Steering Wheel Electronics - Intermittent
                 Freeze Frame:
                        Fault Status: 00100000
                        Fault Priority: 3
                        Fault Frequency: 5
                        Reset counter: 255
                        Time Indication: 0
    
                 Freeze Frame:
                        RPM: 0 /min
                        Speed: 0.0 km/h
                        Load: 0.0 %
                        Voltage: 11.93 V
                        Bin. Bits: 11001100
                        Bin. Bits: 00000000
                        (no units): 0.0
    
    049478 - No Communication with Diagnostic Gateway 
                   U0146 - 000 -  - Intermittent
                 Freeze Frame:
                        Fault Status: 00100000
                        Fault Priority: 3
                        Fault Frequency: 5
                        Reset counter: 255
                        Time Indication: 0
    
                 Freeze Frame:
                        RPM: 0 /min
                        Speed: 0.0 km/h
                        Load: 0.0 %
                        Voltage: 11.93 V
                        Bin. Bits: 11001100
                        Bin. Bits: 00000000
                        (no units): 0.0
    
    006272 - Powertrain Data Bus 
                   P1880 - 000 - Missing Message from Diagnostic Gateway - Intermittent
                 Freeze Frame:
                        Fault Status: 00100000
                        Fault Priority: 3
                        Fault Frequency: 5
                        Reset counter: 255
                        Time Indication: 0
    
                 Freeze Frame:
                        RPM: 0 /min
                        Speed: 0.0 km/h
                        Load: 0.0 %
                        Voltage: 11.93 V
                        Bin. Bits: 11001100
                        Bin. Bits: 00000000
                        (no units): 0.0
    
    005785 - Powertrain Data Bus 
                   P1699 - 000 - Missing Message from Steering Wheel Electronics - Intermittent
                 Freeze Frame:
                        Fault Status: 00100000
                        Fault Priority: 3
                        Fault Frequency: 5
                        Reset counter: 255
                        Time Indication: 0
    
                 Freeze Frame:
                        RPM: 0 /min
                        Speed: 0.0 km/h
                        Load: 0.0 %
                        Voltage: 11.93 V
                        Bin. Bits: 11001100
                        Bin. Bits: 00000000
                        (no units): 0.0
    
    005685 - Powertrain Data Bus 
                   P1635 - 000 - Missing Message from A/C Controller - Intermittent
                 Freeze Frame:
                        Fault Status: 00100000
                        Fault Priority: 3
                        Fault Frequency: 5
                        Reset counter: 255
                        Time Indication: 0
    
                 Freeze Frame:
                        RPM: 0 /min
                        Speed: 0.0 km/h
                        Load: 0.0 %
                        Voltage: 11.93 V
                        Bin. Bits: 11001100
                        Bin. Bits: 00000000
                        (no units): 16.0
    
    053273 - Control Module for Instrument Cluster 
                   U1019 - 000 - Missing Signal for Oil Level/Temperature - Intermittent
                 Freeze Frame:
                        Fault Status: 00100000
                        Fault Priority: 3
                        Fault Frequency: 4
                        Reset counter: 255
                        Time Indication: 0
    
                 Freeze Frame:
                        RPM: 0 /min
                        Speed: 0.0 km/h
                        Load: 0.0 %
                        Voltage: 11.93 V
                        Bin. Bits: 11001100
                        Bin. Bits: 00000000
                        (no units): 0.0
    
    005488 - Engine Start Blocked by Immobilizer 
                   P1570 - 000 -  - Intermittent
                 Freeze Frame:
                        Fault Status: 00100000
                        Fault Priority: 1
                        Fault Frequency: 1
                        Reset counter: 255
                        Time Indication: 0
    
                 Freeze Frame:
                        RPM: 1008 /min
                        Speed: 0.0 km/h
                        Load: 0.0 %
                        Voltage: 12.01 V
                        Bin. Bits: 11001100
                        Bin. Bits: 11000000
                        (no units): 33.0
    
    Readiness: 0 0 0 0 1 
    
    -------------------------------------------------------------------------------
    Address 03: ABS Brakes        Labels: 1K0-907-379-MK60-F.lbl
       Part No SW: 1K0 907 379 AC    HW: 1K0 907 379 AC
       Component: ESP FRONT MK60      0101  
       Revision: 00H11001    
       Coding: 0021121
       Shop #: WSC 00066 000 00000
       VCID: 73EE08B112443ADE87-8026
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 08: Auto HVAC        Labels: 1K0-820-047.lbl
       Part No SW: 1K0 820 047 FT    HW: 1K0 820 047 FT
       Component: Climatic PQ35   141 0909  
       Revision: 00141027    Serial number: 00000000000000
       Shop #: WSC 00000 000 00000
       VCID: 7BFE20913A14729EDF-802E
    
    1 Fault Found:
    01299 - Diagnostic Interface for Data Bus (J533) 
                005 - No or Incorrect Basic Setting / Adaptation
    
    -------------------------------------------------------------------------------
    Address 09: Cent. Elect.        Labels:. 3C0-937-049-30-M.lbl
       Part No SW: 3C0 937 049 AH    HW: 3C0 937 049 AH
       Component: Bordnetz-SG     H54 2202  
       Revision: 00H54000    Serial number: 00000000745277
       Coding: E4890F2700041500470000001C00000000087B075C000100000000000000
       Shop #: WSC 00066 000 00000
       VCID: 6FE604C17E6C1E3E63-803A
    
       Subsystem 1 - Part No: 1K2 955 119 E  Labels: 1KX-955-119.CLB
       Component: Wischer 151107 021  0501  
       Coding: 00038805
       Shop #: WSC 00066  
    
       Subsystem 2 - Part No: 1K0 955 559 AF  Labels: 1K0-955-559-AF.CLB
       Component: RLS     200907 046  0204  
       Coding: 00208933
       Shop #: WSC 00066  
    
    1 Fault Found:
    01299 - Diagnostic Interface for Data Bus (J533) 
                005 - No or Incorrect Basic Setting / Adaptation
                 Freeze Frame:
                        Fault Status: 01100101
                        Fault Priority: 2
                        Fault Frequency: 1
                        Reset counter: 0
                        Mileage: 211853 km
                        Time Indication: 0
                        Date: 2005.09.13
                        Time: 31:63:63
    
                 Freeze Frame:
                            ON
                        Voltage: 11.90 V
                            ON
                            ON
                            OFF
                            OFF
                            OFF
    
    
    -------------------------------------------------------------------------------
    Address 15: Airbags        Labels: 1K0-909-605.lbl
       Part No SW: 1K0 909 605 T    HW: 1K0 909 605 T
       Component: 5S AIRBAG VW8   020 2300  
       Revision: 05020000    Serial number: 0038PD1GK7V   
       Coding: 0013651
       Shop #: WSC 00066 000 00000
       VCID: 3D7AEE896480BCAEA1-8068
    
       Subsystem 1 - Serial number: 6332MSME1640605B4
    
       Subsystem 2 - Serial number: 6342MSME182601730
    
       Subsystem 3 - Serial number: 6351HSME10661725 
    
       Subsystem 4 - Serial number: 6361HSME112C41773
    
    1 Fault Found:
    01299 - Diagnostic Interface for Data Bus (J533) 
                013 - Check DTC Memory - MIL ON
    
    -------------------------------------------------------------------------------
    Address 16: Steering wheel        Labels: 1K0-953-549-MY8.lbl
       Part No SW: 1K0 953 549 BC    HW: 1K0 953 549 BC
       Component: Lenksäulenmodul 036 0070  
       Coding: 0000042
       Shop #: WSC 00066 000 00000
       VCID: 74EC0BAD174A3DE69E-8020
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 17: Instruments        Labels: 1K0-920-xxx-17.lbl
       Part No SW: 1K0 920 964 B    HW: 1K0 920 964 B
       Component: KOMBIINSTRUMENT 3HL 1212  
       Revision: V0002000    Serial number: VWX7Z0GN24E0O1
       Coding: 0003403
       Shop #: WSC 00878 210 85434
       VCID: 2C5CD3CD8FFA252606-8078
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 19: CAN Gateway (J533)       Labels:. 7N0-907-530-V2.clb
       Part No SW: 7N0 907 530 AK    HW: 7N0 907 530 AK
       Component: J533  Gateway H57 1642  
       Revision:   H57       Serial number: 040417F1000047
       Coding: 350000
       Shop #: WSC 00000 000 00000
       VCID: 79F23A99F028408ECD-802C
    
    1 Fault Found:
    01044 - Control Module Incorrectly Coded 
                000 -  - 
                 Freeze Frame:
                        Fault Status: 01100000
                        Fault Priority: 1
                        Fault Frequency: 1
                        Reset counter: 255
                        Mileage: 211853 km
                        Time Indication: 0
                        Date: 2000.00.00
                        Time: 01:03:23
    
    
    -------------------------------------------------------------------------------
    Address 25: Immobilizer        Labels: 1K0-920-xxx-25.clb
       Part No SW: 1K0 920 964 B    HW: 1K0 920 964 B
       Component: IMMO            3HL 1212  
       Revision: V0002000    Serial number: VWX7Z0GN24E0O1
       Shop #: WSC 00000 000 00000
       VCID: 2C5CD3CD8FFA252606-8078
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 42: Door Elect, Driver        Labels:. 1K0-959-701-MIN3.clb
       Part No SW: 1K0 959 701 P    HW: 1K0 959 793 L
       Component: J386  TUER-SG FT    1134  
       Revision: 32008001    Serial number: 00000062579020
       Coding: 0000692
       Shop #: WSC 00066 000 00000
       VCID: 3B7EE0917A94B29E9F-806E
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 44: Steering Assist        Labels: 1Kx-909-144-G2V3.clb
       Part No: 1K2 909 144 M
       Component: EPS_ZFLS Kl.069 H08 1901  
       Shop #: WSC 00066 000 00000
       VCID: 3668F1A541B66FF660-8062
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 46: Central Conv.        Labels:. 1K0-959-433-MAX.clb
       Part No SW: 1K0 959 433 BT    HW: 1K0 959 433 BT
       Component:    KSG PQ35 G2  020 0204  
       Revision: 00020000    Serial number: 00000000000000
       Coding: 8190020052830C7F2D04840570085FC690FCA0
       Shop #: WSC 00066 000 00000
       VCID: 030E587142E40A5E97-8056
    
       Subsystem 1 - Part No: 1K0 951 605 C
       Component: LIN BACKUP HORN H03 1301
    
       Subsystem 2 - Part No: 3C0 951 171 C
       Component: Neigungssensor  004 0611
    
       Subsystem 3 - Part No: 3C0 951 171 C
       Component: Innenraumueberw.004 0611
    
    1 Fault Found:
    01299 - Diagnostic Interface for Data Bus (J533) 
                005 - No or Incorrect Basic Setting / Adaptation
                 Freeze Frame:
                        Fault Status: 01100101
                        Fault Priority: 4
                        Fault Frequency: 1
                        Reset counter: 0
                        Mileage: 211853 km
                        Time Indication: 0
                        Date: 2000.00.00
                        Time: 01:03:22
    
    
    -------------------------------------------------------------------------------
    Address 52: Door Elect, Pass.        Labels:. 1K0-959-702-MIN3.clb
       Part No SW: 1K0 959 702 P    HW: 1K0 959 792 L
       Component: J387  TUER-SG BT    1134  
       Revision: 32008001    Serial number: 00000503479013
       Coding: 0000692
       Shop #: WSC 00066 000 00000
       VCID: 3C7CE38D7F9AB5A696-8068
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 56: Radio        Labels: 1K0-035-1xx-56.lbl
       Part No SW: 1K0 035 186 AD    HW: 1K0 035 186 AD
       Component: Radio BVX       035 0047  
       Revision: 00035000    Serial number: VWZ1Z2G6256159
       Coding: 0040400
       Shop #: WSC 00066 000 00000
       VCID: 68D46FDD5B82C90622-803C
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 62: Door, Rear Left        Labels:. 1K0-959-703-GEN3.clb
       Part No SW: 1K0 959 703 P    HW: 1K0 959 795 G
       Component: J388   TUER-SG HL   1120  
       Revision: 11006001    Serial number: 00000002477039
       Coding: 0000144
       Shop #: WSC 00066 000 00000
       VCID: 3D7AEE896480BCAEA1-8068
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 72: Door, Rear Right        Labels:. 1K0-959-704-GEN3.clb
       Part No SW: 1K0 959 704 P    HW: 1K0 959 794 G
       Component: J389   TUER-SG HR   1120  
       Revision: 11006001    Serial number: 00000002421061
       Coding: 0000144
       Shop #: WSC 00066 000 00000
       VCID: 3E78E9856986A7B6B8-806A
    
    No fault code found.
    
    End-------------------------(Elapsed Time: 01:57)--------------------------
    Last edited by Uwe; 09-08-2017 at 10:04 AM. Reason: CODE tags

  8. #8
    Verified VCDS User
    Join Date
    Nov 2015
    Location
    UK
    Posts
    1
    Post Thanks / Like

    Same symptoms but no changes made before problem

    I have a very similar problem, Car starts and then stops, had a load of can faults, Cant communicate with the gateway and the fans are running as soon as ignition is put on.

    Car has the same issues mentioned earlier in this query, unable to auto detect and also would not do a scan when I input 1K chassis. I haven't changed anything but the car has been sat for many months whilst I worked overseas. The following is the only thing I could get recorded, I have also tried the re-setting electrical system by shorting the +ve and -ve battery leads, but no improvement.

    Code:
    Wednesday,12,June,2019,14:24:08:00970
    VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x64
    VCDS Version: 19.6.0.6 (x64)
    Data version: 20190529 DS308.0
    www.Ross-Tech.com
    
    
    VIN:    License Plate: **59***
    
    
                    Address 01: Engine       Labels: 03G-906-016-BKC.clb
    Control Module Part Number: 03G 906 021 PM    HW: 03G 906 021 AN
      Component and/or Version: R4 1,9L EDC G000SG  1136
               Software Coding: 0050071
                Work Shop Code: WSC 00066 000 00000
                          VCID: 79FF0F3733DA9887D2-5168
    7 Faults Found:
    
    005712 - Powertrain Data Bus 
                   P1650 - 000 - Missing Message from Instrument Cluster
                 Freeze Frame:
                        Fault Status: 01100000
                        Fault Priority: 3
                        Fault Frequency: 18
                        Reset counter: 255
                        Time Indication: 0
    
                 Freeze Frame:
                        RPM: 0 /min
                        Speed: 0.0 km/h
                        Load: 0.0 %
                        Voltage: 10.79 V
                        Bin. Bits: 00001100
                        Torque: 0.0 Nm
                        Torque: 351.4 Nm
    
    005785 - Powertrain Data Bus 
                   P1699 - 000 - Missing Message from Steering Wheel Electronics
                 Freeze Frame:
                        Fault Status: 01100000
                        Fault Priority: 3
                        Fault Frequency: 18
                        Reset counter: 255
                        Time Indication: 0
    
                 Freeze Frame:
                        RPM: 0 /min
                        Speed: 0.0 km/h
                        Load: 0.0 %
                        Voltage: 10.79 V
                        Bin. Bits: 00001100
                        Bin. Bits: 00000000
                        (no units): 0.0
    
    049478 - No Communication with Diagnostic Gateway 
                   U0146 - 000 - 
                 Freeze Frame:
                        Fault Status: 01100000
                        Fault Priority: 3
                        Fault Frequency: 18
                        Reset counter: 255
                        Time Indication: 0
    
                 Freeze Frame:
                        RPM: 0 /min
                        Speed: 0.0 km/h
                        Load: 0.0 %
                        Voltage: 10.79 V
                        Bin. Bits: 11001100
                        Bin. Bits: 00000000
                        (no units): 0.0
    
    006272 - Powertrain Data Bus 
                   P1880 - 000 - Missing Message from Diagnostic Gateway
                 Freeze Frame:
                        Fault Status: 01100000
                        Fault Priority: 3
                        Fault Frequency: 18
                        Reset counter: 255
                        Time Indication: 0
    
                 Freeze Frame:
                        RPM: 0 /min
                        Speed: 0.0 km/h
                        Load: 0.0 %
                        Voltage: 10.79 V
                        Bin. Bits: 11001100
                        Bin. Bits: 00000000
                        (no units): 0.0
    
    005785 - Powertrain Data Bus 
                   P1699 - 000 - Missing Message from Steering Wheel Electronics
                 Freeze Frame:
                        Fault Status: 01100000
                        Fault Priority: 3
                        Fault Frequency: 18
                        Reset counter: 255
                        Time Indication: 0
    
                 Freeze Frame:
                        RPM: 0 /min
                        Speed: 0.0 km/h
                        Load: 0.0 %
                        Voltage: 10.79 V
                        Bin. Bits: 00001100
                        Bin. Bits: 00000000
                        (no units): 0.0
    
    005685 - Powertrain Data Bus 
                   P1635 - 000 - Missing Message from A/C Controller
                 Freeze Frame:
                        Fault Status: 01100000
                        Fault Priority: 3
                        Fault Frequency: 18
                        Reset counter: 255
                        Time Indication: 0
    
                 Freeze Frame:
                        RPM: 0 /min
                        Speed: 0.0 km/h
                        Load: 0.0 %
                        Voltage: 10.79 V
                        Bin. Bits: 11001100
                        Bin. Bits: 00000000
                        (no units): 16.0
    
    005488 - Engine Start Blocked by Immobilizer 
                   P1570 - 000 -  - MIL ON
                 Freeze Frame:
                        Fault Status: 11110000
                        Fault Priority: 1
                        Fault Frequency: 1
                        Reset counter: 255
                        Time Indication: 0
    
                 Freeze Frame:
                        RPM: 1029 /min
                        Speed: 0.0 km/h
                        Load: 0.0 %
                        Voltage: 11.32 V
                        Bin. Bits: 11001100
                        Bin. Bits: 11000000
                        (no units): 33.0
    
    
    Readiness: 0 0 0 0 0
    Last edited by Uwe; 06-12-2019 at 04:54 PM. Reason: CODE tags

  9. #9
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    26,911
    Post Thanks / Like
    Blog Entries
    1
    Quote Originally Posted by Balders_uk1 View Post
    I have a very similar problem, Car starts and then stops, had a load of can faults, Cant communicate with the gateway and the fans are running as soon as ignition is put on.

    Car has the same issues mentioned earlier in this query, unable to auto detect and also would not do a scan when I input 1K chassis. I haven't changed anything but the car has been sat for many months whilst I worked overseas. The following is the only thing I could get recorded, I have also tried the re-setting electrical system by shorting the +ve and -ve battery leads, but no improvement.
    OK, so the ECU is powering up and communicating via K-Line, but nothing on CAN is, including the Gateway. I would start there. Check that the Gateway has good power and ground where it should.

    -Uwe-
    The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •