Results 1 to 4 of 4

Thread: Engine control module 01314

  1. #1
    Verified VCDS User
    Join Date
    Sep 2018
    Location
    UK
    Posts
    67
    Post Thanks / Like

    Engine control module 01314

    Hi
    Just had a problem with my car as the revs were staying high scanned the car and got the engine control module 01314 008 and 004 on the engine the gear box in total around 10 modules had this fault I have now cleared them and itís back normal it has just been remapped and read this could be the cause think it reads with flashed or remapped

    What I donít get is the same fault in the scan even come up in headlights radio etc are these just sympathy faults because the ecu has been flashed ?

    Cheers Matt

  2. #2
    NostraJackAss Jack@European_Parts's Avatar
    Join Date
    Jan 2014
    Location
    1001 State Route 17K Montgomery New York 12549
    Posts
    18,392
    Post Thanks / Like
    Please post a complete auto-scan for as Uwe would say "context".

    Thank you

    Maybe ask your tuner why they did a half ass job & by not clearing the fault memories after putting the ECU in programming mode interferes with messages on the network typically?
    European Parts Emporium/Performance / Immobilizer Solutions EPE
    Certified Master Trained NY/BAR/BAD 7076062/ASE/SAE/NASTF Legal Factory Authorized/Licensed GeKo/FaZit # 403738
    Specializing in Custom Services IE: "welding-fabrication" / EPA-SMOG Update or Pass-Thru-Programming / Data Transfer / Immobilizers & OEM Quality Parts
    Above Magic! No Written record, AUTO-SCAN or Appointment = NO HELP!
    www.FixMyEuro.com <<<<<CLICK HERE! or vwemporium@aol.com ( JPPSG & Unverified members need not PM me & Please don't email or call facility for free tech support...use the forum )
    Getting you CONTROL again of your property - TAKE IT! In Conjunction with.........

  3. #3
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    26,487
    Post Thanks / Like
    Blog Entries
    1
    That's normal after a "tune". While the ECU is in boot-loader mode being flashed, it can't communicate with the other modules in the car and they will set fault codes about it.

    A workman-like tuner would clear all those fault codes out before returning the car to the customer, right Jack?

    -Uwe-
    The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.

  4. Likes Jack@European_Parts liked this post
  5. #4
    Verified VCDS User
    Join Date
    Sep 2018
    Location
    UK
    Posts
    67
    Post Thanks / Like
    This is what I would thought tbh it was only when I found the revs holding high when slowing down I got in touch with the tuner and he was coming out to look at it . And never heard of it before but I decided to do a scan and found nearly every module with w fault one even down to headlights and radio etc cleared all the faults then Iím back to running fine again

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •