Results 1 to 7 of 7

Thread: DQ200 BASIC SETTING OF TRASMISSION ISSUE

  1. #1
    Verified VCDS User
    Join Date
    Jun 2019
    Location
    Italy
    Posts
    3
    Post Thanks / Like

    DQ200 BASIC SETTING OF TRASMISSION ISSUE

    Hello everyone. I am an owner of GOLF TGI DSG 7, which start has trasmission problem very early 10000 km.
    I feel the trasmission change very soon, the engine always labouring at low rpm, a very bad response of the engine when pushing accelerator pedal.
    These problems start very likely, after a bodyshop mechanich reparation, where the battery was probabily disconnected.

    I lost hope in VW service, so I decided try to do adaptation by my self with a rosstech HEX V2 bought recently.

    TBA was perform succesfully and now I can feel the car better.
    Then an IDE 02903 [basic setting of trasmission] was selected from the scroll menu; initially the screen, shown "RUNNING" but after some minutes and some normal noise of trasmission, the "UNKNOW" message appear (with ignition ON, engine OFF), made me very concerned.
    This procedure appear different from what I aspected, expecially comparing with the one on the following link: wiki-ross tech at this link http://wiki.ross-tech.com/wiki/index...rbox_(DSG/0AM),
    So here I don't need to set any group, eg.60 etc...

    No fault codes are stored and the car seems work quite well, but always with not the best response of the engne when pressing accelerator pedal.

    I found somebody who post the following procedure:
    "Engine idle speed, do not press accelerator pedal

    Parking brake and foot brake applied during the entire procedure. This can be confirmed using Advanced Measuring Values:
    * IDE02713 Brake Light Switch
    * IDE02714 Brake test switch

    0D9 - DQ250 MQB - Basic Settings Procedure:
    [Select]
    [02- Auto Trans]
    [Basic Settings-04]
    Select [Basic settings of transmission]
    [Show Measuring Data] and select:
    * IDE00021 Engine speed
    * IDE00322 Status of basic setting
    * IDE00024 Transmission fluid temperature
    [Go!]

    - During the basic setting procedure, there may be some loud gear shifting noises from the transmission, this is normal."


    In my situation , with idle engine the "UNKNOW" message is shown again and adaptation does not start: I don't know if procedure was succesfully or not, is there a more update guide please??

    Many tanks!

  2. #2
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    23,795
    Post Thanks / Like
    Blog Entries
    1
    Hi and welcome.

    Please post an Auto-Scan for context.

    -Uwe-
    The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.

  3. #3
    Verified VCDS User
    Join Date
    Jun 2019
    Location
    Italy
    Posts
    3
    Post Thanks / Like
    I hope this is the scan required

    Code:
    Tuesday,04,June,2019,22:20:41:51758
    VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x64
    VCDS Version: 19.6.0.2 (x64)  HEX-V2 CB: 0.4505.4
    Data version: 20190529 DS308.0
    www.Ross-Tech.com
    
    
    
    
    Chassis Type: AU-VW37 (3Q0)
    Scan: 01 02 03 08 09 10 13 15 16 17 19 42 44 52 5F
    
    VIN: WVWZZZAUZJP121418   Mileage: 28884km-17947miles
    
    01-Engine -- Status: OK 0000
    02-Auto Trans -- Status: OK 0000
    03-ABS Brakes -- Status: OK 0000
    08-Auto HVAC -- Status: OK 0000
    09-Cent. Elect. -- Status: OK 0000
    10-Park/Steer Assist -- Status: OK 0000
    13-Auto Dist. Reg -- Status: OK 0000
    15-Airbags -- Status: OK 0000
    16-Steering wheel -- Status: OK 0000
    17-Instruments -- Status: OK 0000
    19-CAN Gateway -- Status: OK 0000
    42-Door Elect, Driver -- Status: OK 0000
    44-Steering Assist -- Status: OK 0000
    52-Door Elect, Pass. -- Status: OK 0000
    5F-Information Electr. -- Status: OK 0000
    -------------------------------------------------------------------------------
    Address 01: Engine (J623-CPWA)       Labels:. 04E-907-309-V1.clb
       Part No SW: 04E 906 016 ER    HW: 04E 907 309 E
       Component: R4 1.4l CSI   H16 5823  
       Revision: WIH16---    
       Coding: 01250032236405082000
       Shop #: WSC 30054 264 00000
       ASAM Dataset: EV_ECM14CSI01104E906016ER 002003
       ROD: EV_ECM14CSI01104E906016EH.rod
       VCID: 76B5E77AC84B9F57E0D-8022
    
       CAN Converter 01: 
    
    No fault code found.
    Readiness: 0000 0000
    
    -------------------------------------------------------------------------------
    Address 02: Auto Trans (J743)       Labels: 0CW-927-769.clb
       Part No SW: 0CW 300 041 N    HW: 0AM 927 769 E
       Component: GSG DQ200G2_M H05 1605  
       Revision: 00005008    Serial number: CU501802195161
       Coding: 0014
       Shop #: WSC 00028 028 00066
       ASAM Dataset: EV_TCMDQ200021 001001
       ROD: EV_TCMDQ200021_VW31.rod
       VCID: 40D941A2DA0F61E78A1-8014
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 03: ABS Brakes (J104)       Labels: 5Q0-907-379-IPB-V1.clb
       Part No SW: 5Q0 614 517 CR    HW: 5Q0 614 517 AD
       Component: ESC           H25 0523  
       Revision: 00000000    Serial number: 60668000003493
       Coding: 01FA6AA12422216D477B060160CB2580562484E26006A4733822F078C202430B00000012121212B835351919323200
       Shop #: WSC 00028 028 00066
       ASAM Dataset: EV_Brake1UDSContiMK100IPB 037009
       ROD: EV_Brake1UDSContiMK100IPB_037_VW37.rod
       VCID: 03538EAE8B99BAFFD73-8056
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 08: Auto HVAC (J255)       Labels:| 5G0-907-044.clb
       Part No SW: 5G0 907 044 CF    HW: 5G0 907 044 CF
       Component: Climatronic   H04 1801  
       Revision: 00001K08    
       Coding: 00020004200110011005000000101022
       Shop #: WSC 00028 028 00066
       ASAM Dataset: EV_ACClimaBHBVW37X 006145
       ROD: EV_ACClimaBHBVW37X_006.rod
       VCID: 6D87C816BD1D5C8F117-8038
    
       Fresh Air Blower Front: 
    
       Geber für Kältemitteldruck/Kältemitteltemperatur: 
    
       Air quality sensor: 
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 09: Cent. Elect. (J519)       Labels:. 5Q0-937-08X-V2.clb
       Part No SW: 5Q0 937 084 CP    HW: 5Q0 937 084 CF
       Component: BCM MQBAB M+  H36 0253  
       Serial number: 01001806503990
       Coding: 000000000000000000000000000000000000000000000000000000000000
       Shop #: WSC 00028 028 00066
       ASAM Dataset: EV_BCMMQB 018001
       ROD: EV_BCMBOSCH_018.rod
       VCID: 08499982B2BF99A7821-805C
    
       Control Unit For Wiper Motor: 
       Subsystem 1 - Part No SW: 5G1 955 119 A    HW: 5G1 955 119 A  Labels: 5QX-955-119-V1.CLB
       Component: WWS    180210  043 0551 
       Serial number:         180218230320
       Coding: 0E4DDD
    
       Rain Light Recognition Sensor: 
       Subsystem 2 - Part No SW: 5Q0 955 547 B    HW: 5Q0 955 547 B  Labels: 5Q0-955-547.CLB
       Component: RLHS  047 0105 
       Serial number: S8Y18M03D08H09M42S06
       Coding: 00A8DD
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 10: Park/Steer Assist (J446)       Labels:| 5Q0-919-294.clb
       Part No SW: 5QA 919 294 B    HW: 5QA 919 294 
       Component: PDC 8 KanalH07 0044  
       Serial number: 000308418018053
       Coding: 0471051811
       Shop #: WSC 00028 028 00066
       ASAM Dataset: EV_EPHVA18AU3700000 009035
       ROD: EV_EPHVA18AU3700000_009_VW37.rod
       VCID: 4BC3668EE349B2BF6F3-801E
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 13: Auto Dist. Reg (J428)       Labels:| 3Q0-907-572.clb
       Part No SW: 5Q0 907 572 J    HW: 3QF 907 572 
       Component: ACC BOSCH MQB H10 0654  
       Coding: 3300670111FFC728949C810580400600000000000000000000
       Shop #: WSC 00028 028 00066
       ASAM Dataset: EV_ACCBOSCHVW416 002006
       ROD: EV_ACCBOSCHVW416_002_VW37.rod
       VCID: 3E253F5AA0FB1717F8D-806A
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 15: Airbags (J234)       Labels:| 5Q0-959-655.clb
       Part No SW: 5Q0 959 655 BH    HW: 5Q0 959 655 BH
       Component: AirbagVW21    005 0336  
       Serial number: 003VVR3YZFV 
       Coding: 98CCC000000000005C0000CF000800000065
       Shop #: WSC 00028 028 00063
       ASAM Dataset: EV_AirbaVW20SMEVW37X 002158
       ROD: EV_AirbaVW20SMEVW37X.rod
       VCID: 074B9ABEBFA196DF8BB-8052
    
       Side Sensor Driver Front: 
       Subsystem 1 - Part No SW: -----------    HW: 480 000 103 18
       Component: SideSensor_Df  001 0887 
       Serial number: 35700000000755C81C2O
       Coding: 2D2D2D
    
       Side Sensor Passenger Front: 
       Subsystem 2 - Part No SW: -----------    HW: 480 000 103 18
       Component: SideSensor_Pf  001 0887 
       Serial number: 35800000000E0C393C2S
       Coding: 2D2D2D
    
       Side Sensor Driver Rear: 
       Subsystem 3 - Part No SW: -----------    HW: 480 400 903 18
       Component: SideSensor_Dr  000 6149 
       Serial number: 3510001AD298CB0286EJ
       Coding: 2D2D2D
    
       Side Sensor Passenger Rear: 
       Subsystem 4 - Part No SW: -----------    HW: 480 400 903 18
       Component: SideSensor_Pr  000 6149 
       Serial number: 3520001C1294E953E7FK
       Coding: 2D2D2D
    
       Front Sensor Driver: 
       Subsystem 5 - Part No SW: -----------    HW: 480 400 303 18
       Component: FrontSensor_D  000 6149 
       Serial number: 3550001C32929722E460
       Coding: 2D2D2D
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 16: Steering wheel (J527)       Labels:| 5Q0-953-549.clb
       Part No SW: 5Q0 953 507 GH    HW: 5Q0 953 549 E
       Component: Lenks. Modul  003 0140  
       Revision: --------    Serial number: 08031820240175
       Coding: 0410
       Shop #: WSC 00028 028 00066
       ASAM Dataset: EV_SMLSKLOMQB 020002
       ROD: EV_SMLSKLOMQB_020_VW37.rod
       VCID: 025D8BAA9483B3F7DC5-8056
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 17: Instruments (J285)       Labels:| 5G0-920-XXX-17.clb-SRI3
       Part No SW: 5G1 920 752 C    HW: 5G1 920 752 C
       Component: KOMBI         302 0310  
       Coding: 07A42A082780000801882A011401000080000000
       Shop #: WSC 00028 028 00070
       ASAM Dataset: EV_DashBoardVDDMQBAB 009060
       ROD: EV_DashBoardVDDMQBAB_009_VW37.rod
       VCID: 290FFC06497580AFBDF-807C
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 19: CAN Gateway (J533)       Labels:| 3Q0-907-530-V1.clb
       Part No SW: 3Q0 907 530 L    HW: 3Q0 907 530 C
       Component: GW MQB High   518 5323  
       Serial number: 24021810803755
       Coding: 030100047F085708FA0002481C0F00010001070000000000000000000000
       Shop #: WSC 00028 028 00066
       ASAM Dataset: EV_GatewNF 013023
       ROD: EV_GatewNF.rod
       VCID: 3829294282DF2927321-806C
    
       Alternator: 
    
       Multi Function Steering Wheel Control Module: 
       Subsystem 2 - Part No SW: 5G0 959 442 K    HW: 5G0 959 442 K  Labels: 3C8-959-537.CLB
       Component: E221__MFL-DC1  H17 0040 
       Serial number: 29180000271310098061
       Coding: 2CFFFF
    
       Battery Monitoring Control Module: 
       Subsystem 3 - Part No SW: 5Q0 915 181 K    HW: 5Q0 915 181 K
       Component: J367-BDMHella  H10 9070 
       Serial number: 0494257004          
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 42: Door Elect, Driver (J386)       Labels:| 5QX-959-X93-42.clb
       Part No SW: 5Q4 959 593 E    HW: 5Q4 959 593 B
       Component: TSG FS        011 0032  
       Serial number: 0000306993038 
       Coding: 003A03208000020000001000
       Shop #: WSC 00028 028 00231
       ASAM Dataset: EV_DCUDriveSideEWMAXCONT 006001
       ROD: EV_DCUDriveSideEWMAXCONT.rod
       VCID: 47CB5ABEFF2156DF4BB-8012
    
       Drivers Door Rear Control Module: 
       Subsystem 1 - Part No SW: 5Q4 959 811 D    HW: 5Q4 959 811 D  Labels: 5QX-959-81X-V1.CLB
       Component: Fond FHSG DRV  007 0002 
       Serial number: 00000000000008307055
       Coding: 010000
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 44: Steering Assist (J500)       Labels:| 5Q0-909-144.clb
       Part No SW: 5Q0 909 144 AA    HW: 5Q0 909 144 AA
       Component: EPS_MQB_ZFLS  131 1081  
       Coding: 011F0000
       Shop #: WSC 00028 028 00066
       ASAM Dataset: EV_SteerAssisMQB 015157
       ROD: EV_SteerAssisMQB_015.rod
       VCID: 73B3DE6EDB398A7FC73-8026
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 52: Door Elect, Pass. (J387)       Labels:| 5QX-959-X92-52.clb
       Part No SW: 5Q4 959 592 E    HW: 5Q4 959 592 B
       Component: TSG BFS       011 0032  
       Serial number: 0000306159747 
       Coding: 003A01208E00020000801000
       Shop #: WSC 00028 028 00066
       ASAM Dataset: EV_DCUPasseSideEWMAXCONT 006001
       ROD: EV_DCUPasseSideEWMAXCONT.rod
       VCID: 46D557BAF82B4FD7B0D-8012
    
       Passengers Rear Door Control Module: 
       Subsystem 1 - Part No SW: 5Q4 959 812 D    HW: 5Q4 959 812 D  Labels: 5QX-959-81X-V1.CLB
       Component: Fond FHSG PSG  007 0002 
       Serial number: 00000000000008298091
       Coding: 090000
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 5F: Information Electr. (J794)       Labels:| 5G0-035-MIB-STD2.clb
       Part No SW: 3Q0 035 824 C    HW: 3Q0 035 824 C
       Component: MU-S--ER      722 0867  
       Serial number:               
       Coding: 02731000FF0000005111000100080A001F0500C40120050003
       Shop #: WSC 00028 028 00066
       ASAM Dataset: EV_MUStd4CDELP 001001
       ROD: EV_MUStd4CDELP_VW37.rod
       VCID: 2D0708167D9D9C8F517-8078
    
       Operating And Display Unit 1: 
       Subsystem 1 - Part No SW: 5G6 919 605 A    HW: 5G6 919 605 A
       Component: ABT_Std-2  H50 8130 
       Serial number: VWZ6ZJV0636662      
    
    No fault code found.
    
    End----------(Elapsed Time: 01:18, VBatt start/end: 12.4V/12.3V)-----------
    many thanks

  4. Likes Uwe liked this post
  5. #4
    Verified VCDS User
    Join Date
    Jun 2019
    Location
    Italy
    Posts
    3
    Post Thanks / Like
    Solved the problem of basic setting of trasmission.


    adv. measuring block select:
    -basic setting sequence index (this is essential)
    -status of basic setting
    -satus of basic setting data

    ignition ON, engine OFF
    [GO] basic setting of transmission
    wait until in the basic setting sequence index appear number 4, and then turn the engine ON
    after a couple of minutes and some noise, the live data should diplay now:
    -basic setting sequence index: [254]
    -status of basic setting: [16]
    -satus of basic setting data: [VALID]

    ...and info: [FINISHED CORRECTLY] finally is dislayed.

    This procedure work fine with me, and gears switch are much smoother but the pedal accelerator still has a bad response (only in Drive mode).
    Maybe a software problem? I have found this link very interesting seem matching with my issue:http://www.tvsengineering.nl/en/gearbox/dsg/dq200.html

  6. Likes Uwe, downtime liked this post
  7. #5
    New User
    Join Date
    Jul 2019
    Location
    Kosovo
    Posts
    1
    Post Thanks / Like
    Hey when a want to do the basic setting it gives me the message to enter three numbers.does anybody known which numbers

  8. #6
    Verified VCDS User PetrolDave's Avatar
    Join Date
    Dec 2014
    Location
    South Molton, UK
    Posts
    2,123
    Post Thanks / Like
    Quote Originally Posted by Nitnesvakes View Post
    Hey when a want to do the basic setting it gives me the message to enter three numbers.does anybody known which numbers
    It would be a lot easier to answer your question when you post a full unedited VCDS Auto-Scan so we know what car you have, what TCU is fitted, etc.

  9. #7
    New User
    Join Date
    Nov 2018
    Location
    UK
    Posts
    20
    Post Thanks / Like
    Been waiting over a year for this guide lol. Knew it would come eventually. I had the dreaded unknown too and eventually gave up. Only issue was sometimes I lost drive and if I didn’t know about the holding gas pedal to the floor trick the car would have been off to dealers. I’m still reluctant to try this. Has anyone done a video or maybe plan to ?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •