2004 Audi A4 cluster adaptation

   #1  

rrador

Verified VCDS User
Verified
Joined
Jan 28, 2019
Messages
17
Reaction score
8
Location
Canada
VCDS Serial number
C?ID=68027
Is it possible to adapt new cluster for this car with vcds? I don't see procedure in the wiki.
Tried as immo3 cluster but that does not work.
It is RB4 cluster

Code:
Wednesday,29,May,2019,16:54:04:38330
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x64
VCDS Version: 18.9.1.0 (x64)
Data version: 20190114 DS296.0
www.Ross-Tech.com


VIN: WAUAC48H24K014230   License Plate: 
Mileage: 10km-6mi   Repair Order: 



--------------------------------------------------------------------------------
--------------------------------------------------------------------------------


Chassis Type: 8H (8E - Audi A4/S4/RS4 B6/B7 (2001 > 2008))
Scan: 01 02 03 08 09 0F 11 15 16 17 18 25 36 37 45 46 55 56 57 65
          67 69 75 76 77
 
VIN: WAUAC48H24K014230   Mileage: 10km-6miles
-------------------------------------------------------------------------------
Address 01: Engine        Labels: 06B-909-518-AMB.lbl
   Part No SW: 8E0 909 518 AK    HW: 8E0 909 018 A
   Component: 1.8L R4/5VT     G   0006  
   Coding: 0016584
   Shop #: WSC 93030 999 83980
   VCID: 79F93B8D334CE8829A-5140

4 Faults Found:
18010 - Power Supply Terminal 30 
            P1602 - 002 - Voltage too Low - Intermittent
18107 - Powertrain Data Bus 
            P1699 - 008 - Missing Message from Steering Wheel Electronics - Intermittent
18043 - Powertrain Data Bus 
            P1635 - 008 - Missing Message from A/C Controller - Intermittent
18058 - Powertrain Data Bus 
            P1650 - 004 - Missing Message from Instrument Cluster - Intermittent
Readiness: 0110 0101

-------------------------------------------------------------------------------
Address 02: Auto Trans        Labels: 01J-927-156.lbl
   Part No SW: 8E0 910 155 F    HW: 01J 927 156 JK
   Component: V30 01J 1.8l5VT USA 3220  
   Revision: 00000007    Serial number: 00000001210603
   Coding: 0001001
   Shop #: WSC 93030 999 72925
   VCID: 285F2EC99866A10AB5-5122

1 Fault Found:
18270 - Powertrain Data Bus 
            P1862 - 000 - Missing Message from Instrument Cluster - Intermittent

-------------------------------------------------------------------------------
Address 03: ABS Brakes        Labels: 8E0-614-517.lbl
   Part No: 8E0 614 517 
   Component: ABS/ESP front       3429  
   Coding: 04279
   Shop #: WSC 00001  
   VCID: 65C167FDFFF47C624E-5122

1 Fault Found:
01317 - Control Module in Instrument Cluster (J285) 
            49-10 - No Communications - Intermittent

-------------------------------------------------------------------------------
Address 08: Auto HVAC        Labels: 8E0-820-043.lbl
   Part No: 8E0 820 043 AD
   Component:   A4 Klimaautomat   1323  
   Coding: 00100
   Shop #: WSC 00672  
   VCID: 63C579E5F1C00252A0-5122

4 Faults Found:
00532 - Supply Voltage B+ 
            53-10 - Supply Voltage Too Low - Intermittent
01317 - Control Module in Instrument Cluster (J285) 
            49-10 - No Communications - Intermittent
00474 - Control Module for Immobilizer 
            49-00 - No Communications
00474 - Control Module for Immobilizer 
            27-10 - Implausible Signal - Intermittent

-------------------------------------------------------------------------------
Address 09: Cent. Elect.        Labels: 8E0-907-279-8E2.lbl
   Part No: 8E0 907 279 F
   Component: int. Lastmodul  KAN 0517  
   Coding: 01014
   Shop #: WSC 00672  
   VCID: 3561F7BD0FD4CCE23E-4AE8

8 Faults Found:
01500 - Bulb for Fog-Lamps; Right (L23) 
            57-00 - Electric Circuit Failure
01518 - Bulb for Back-Up Lights; Left (M16) 
            57-00 - Electric Circuit Failure
01519 - Bulb for Back-Up Lights; Right (M17) 
            57-00 - Electric Circuit Failure
01501 - Bulb for Blinkers; Rear Left (M6) 
            57-00 - Electric Circuit Failure
01331 - Door Control Module; Driver Side (J386) 
            49-00 - No Communications
00474 - Control Module for Immobilizer 
            49-00 - No Communications
01317 - Control Module in Instrument Cluster (J285) 
            49-10 - No Communications - Intermittent
01317 - Control Module in Instrument Cluster (J285) 
            79-10 - Please Check Fault Codes - Intermittent

-------------------------------------------------------------------------------
Address 15: Airbags        Labels: 8H0-959-655-84.lbl
   Part No: 8H0 959 655 B
   Component: Airbag 8.4EC        2015  
   Coding: 0010105
   Shop #: WSC 00672 785 00200
   VCID: 3979FB8D73CC2882DA-5122

2 Faults Found:
00474 - Control Module for Immobilizer 
            004 - No Signal/Communication - Intermittent
00532 - Supply Voltage B+ 
            002 - Lower Limit Exceeded - Intermittent

-------------------------------------------------------------------------------
Address 16: Steering wheel        Labels: 8E0-953-549.lbl
   Part No: 8E0 953 549 N
   Component: Lenksáulenmodul     0611  
   Coding: 01041
   Shop #: WSC 00672  
   VCID: 3E73E8913AE20FBAEF-4AE8

3 Faults Found:
01331 - Door Control Module; Driver Side (J386) 
            49-00 - No Communications
01317 - Control Module in Instrument Cluster (J285) 
            49-10 - No Communications - Intermittent
00474 - Control Module for Immobilizer 
            49-00 - No Communications

-------------------------------------------------------------------------------
Address 17: Instruments        Labels: 8E0-920-9xx-8E2.lbl
   Part No: 8H0 920 900 C
   Component: KOMBI+WEGFAHRS. RB4 D17  
   Coding: 02301
   Shop #: WSC 00000  
   VCID: 275D2DF5C578AE72BC-5122
   WAUAC48H34K009019     AUZ6Z0C0259440

3 Faults Found:
01176 - Key 
            65-10 - Unauthorized - Intermittent
01331 - Door Control Module; Driver Side (J386) 
            49-00 - No Communications
01304 - Radio 
            49-00 - No Communications

-------------------------------------------------------------------------------
Address 46: Central Conv.        Labels:. 8E0-959-433-MAX.clb
   Part No: 8H0 959 433 C
   Component: Komfortgerát T7B    1412  
   Coding: 11788
   Shop #: WSC 00672  
   VCID: 3467CAB904AED5EA09-4AE8

   Subsystem 1 - Part No: Steuerger
   Component: t Fahr. antwortet nicht     

   Subsystem 2 - Part No: 8H1959802
   Component: Tõrsteuer.BF BRM 0001  

   Subsystem 3 - Part No: 8H0959801A
   Component: Tõrsteuer.HL BRM 0001  

   Subsystem 4 - Part No: 8H0959802A
   Component: Tõrsteuer.HR BRM 0001  

11 Faults Found:
01331 - Door Control Module; Driver Side (J386) 
            49-00 - No Communications
01317 - Control Module in Instrument Cluster (J285) 
            49-10 - No Communications - Intermittent
00962 - Alarm via. Tilt Sensor 
            35-00 -  - 
01374 - Alarm triggered by Terminal 15 
            35-00 -  - 
01371 - Alarm triggered by Door Contact Switch; Driver's Side 
            35-00 -  - 
01572 - Alarm triggered by Door Contact Switch; Passenger Side 
            35-00 -  - 
00892 - Switch for Trunk Closing Cylinder (F248) 
            27-10 - Implausible Signal - Intermittent
01332 - Door Control Module; Passenger Side (J387) 
            53-10 - Supply Voltage Too Low - Intermittent
00934 - Electric Window Motor; Rear Left (V26) 
            62-10 - No or Incorrect Adjustment - Intermittent
01333 - Door Control Module; Rear Left (J388) 
            37-00 - Faulty
01334 - Door Control Module; Rear Right (J389) 
            37-00 - Faulty

-------------------------------------------------------------------------------
Address 55: Headlight Range        Labels: 4Z7-907-357.lbl
   Part No: 4Z7 907 357 
   Component: dynamische LWR       D09  
   Coding: 00070
   Shop #: WSC 00672  
   VCID: 04075A79148EA56AF9-4B1A

1 Fault Found:
00532 - Supply Voltage B+ 
            07-10 - Signal too Low - Intermittent

End-------------------------(Elapsed Time: 05:49)--------------------------
 
Last edited by a moderator:
   #2  

Jack@European_Parts

Gone But Not Forgotten
Professional VCDS User
Joined
Jan 29, 2014
Messages
21,923
Reaction score
9,308
Location
Montgomery, NY, USA
VCDS Serial number
C?ID=57337
That is not a new cluster it is a used cluster & with a different identity.

I could help you with a data transfer, provided you supply the needed controllers, all keys and proof of purchase with ownership credentials.

Address 17: Instruments Labels: 8E0-920-9xx-8E2.lbl
Part No: 8H0 920 900 C
Component: KOMBI+WEGFAHRS. RB4 D17


WAUAC48H24K014230

Emission standard0GNEmission standard ULEV 1

Vehicle Identification No.WAUAC48H24K014230
ModelAudi A4 Cabrio. 1,8
AA4C
Date of production26.11.2003
Model year2004
Sales type8H752H
Engine CodeAMB
Transmission CodeGHX

8H0 920 900 EX920-000instrument cluster260KM/H
"CDN"+
PR-9Q2



WAUAC48H34K009019 AUZ6Z0C0259440

Emission standard0GNEmission standard ULEV 1

Vehicle Identification No.WAUAC48H34K009019
ModelAudi A4 Cabrio. 1,8
AA4C
Date of production11.09.2003
Model year2004
Sales type8H752H
Engine CodeAMB
Transmission CodeGHX

8H0 920 900 EX920-000instrument cluster260KM/H"CDN"+
PR-9Q2

 
Last edited:
   #3  

Uwe

Benevolent Dictator
Administrator
Joined
Jan 29, 2014
Messages
48,902
Reaction score
33,624
Location
USA
VCDS Serial number
HC100001
It is an Immo-3 cluster.
Are you certain both PINs are correct?
Is the key in the ignition matched to the old cluster and ECU?

-Uwe-
 
   #4  

Jack@European_Parts

Gone But Not Forgotten
Professional VCDS User
Joined
Jan 29, 2014
Messages
21,923
Reaction score
9,308
Location
Montgomery, NY, USA
VCDS Serial number
C?ID=57337
It is a very common issue for incorrect pirated Chinese tools to corrupt the ability to do an 050 in RB type cluster due to protection Electronic Counter Measures by "ECM" in cluster for tampering.
 
  • Like
Reactions: Uwe
   #5  

rrador

Verified VCDS User
Verified
Joined
Jan 28, 2019
Messages
17
Reaction score
8
Location
Canada
VCDS Serial number
C?ID=68027
That is not a new cluster it is a used cluster & with a different identity.

I could help you with a data transfer, provided you supply the needed controllers, all keys and proof of purchase with ownership credentials.

Address 17: Instruments Labels: 8E0-920-9xx-8E2.lbl
Part No: 8H0 920 900 C
Component: KOMBI+WEGFAHRS. RB4 D17


WAUAC48H24K014230

Emission standard0GNEmission standard ULEV 1

Vehicle Identification No.WAUAC48H24K014230
ModelAudi A4 Cabrio. 1,8
AA4C
Date of production26.11.2003
Model year2004
Sales type8H752H
Engine CodeAMB
Transmission CodeGHX

8H0 920 900 EX920-000instrument cluster260KM/H
"CDN"+
PR-9Q2



WAUAC48H34K009019 AUZ6Z0C0259440

Emission standard0GNEmission standard ULEV 1

Vehicle Identification No.WAUAC48H34K009019
ModelAudi A4 Cabrio. 1,8
AA4C
Date of production11.09.2003
Model year2004
Sales type8H752H
Engine CodeAMB
Transmission CodeGHX

8H0 920 900 EX920-000instrument cluster260KM/H"CDN"+
PR-9Q2


Used but virginised so for purposes of programming it's like brand new.
If original cluster was available i wouldn't be here, transferring data is easy
 
   #6  

rrador

Verified VCDS User
Verified
Joined
Jan 28, 2019
Messages
17
Reaction score
8
Location
Canada
VCDS Serial number
C?ID=68027
It is an Immo-3 cluster.
Are you certain both PINs are correct?
Is the key in the ignition matched to the old cluster and ECU?

-Uwe-

So it should program just like any other immo3 cluster? Just wasn't sure about that part because every time I did one of these original cluster was available to just transfer immo data from it.
Anything is possible but codes should be correct, read them with couple different tools to confirm.
Car is theft recovery from an auction and a lot of parts were missing along with the key, so it's a new blank key. Could that be a problem? But I'm pretty sure with immo3 that shouldn't matter as long the pins are correct
 
   #7  

Uwe

Benevolent Dictator
Administrator
Joined
Jan 29, 2014
Messages
48,902
Reaction score
33,624
Location
USA
VCDS Serial number
HC100001
Car is theft recovery from an auction and a lot of parts were missing along with the key, so it's a new blank key. Could that be a problem? But I'm pretty sure with immo3 that shouldn't matter as long the pins are correct
Yes, it sounds like that's the problem. With Immo-3 you can match one thing (key, cluster, or ECU) if the other two are already match, but you don't have that at the moment. I'm not sure what the solution is here.

-Uwe-
 
   #8  

Jack@European_Parts

Gone But Not Forgotten
Professional VCDS User
Joined
Jan 29, 2014
Messages
21,923
Reaction score
9,308
Location
Montgomery, NY, USA
VCDS Serial number
C?ID=57337
Yes, it sounds like that's the problem. With Immo-3 you can match one thing (key, cluster, or ECU) if the other two are already match, but you don't have that at the moment. I'm not sure what the solution is here.

-Uwe-
I am OP , very common mistakes are made, send it to me for data transfer.
 
   #9  

Jetta 97

Professional User
Professional VCDS User
Joined
Apr 22, 2014
Messages
1,546
Reaction score
1,546
Location
Dallas (McKinney) ,TX ,USA
VCDS Serial number
C?ID=81680
Yes, it sounds like that's the problem. With Immo-3 you can match one thing (key, cluster, or ECU) if the other two are already match, but you don't have that at the moment. I'm not sure what the solution is here.

-Uwe-

Manual Transfer only , which can not be done only with VCDS. But even if he has original key , used cluster at this car can not be adopted with VCDS, unless you set it to Factory 04 or 01 mode , even if you have both Pins.
( Jack Please do not comment on this ,Please , I like to respect UWE form last discussion)
 
   #10  

Jack@European_Parts

Gone But Not Forgotten
Professional VCDS User
Joined
Jan 29, 2014
Messages
21,923
Reaction score
9,308
Location
Montgomery, NY, USA
VCDS Serial number
C?ID=57337
Manual Transfer only , which can not be done only with VCDS. But even if he has original key , used cluster at this car can not be adopted with VCDS, unless you set it to Factory 04 or 01 mode , even if you have both Pins.
( Jack Please do not comment on this ,Please , I like to respect UWE form last discussion)

No Marin, the forum doesn't work like that.

Again if the proper security clearance is had and input, with a successful login, you can indeed set this in adaption in VCDS & to the "desired immobilizer status"! or if the cluster is in a new mode status as the OP stated or as OP aforementioned a new blank key transponder can be married and then an 050 can take place or manual data transfer can save used transponders or if you know what you are doing you can default the ID48 transponders with OEM tools or some aftermarket tools.

Now if the EEPROM is off from improper tools used, that must be fixed manually too!

Used but virginised so for purposes of programming it's like brand new.
If original cluster was available i wouldn't be here, transferring data is easy

OP says it's virgin......

So it should program just like any other immo3 cluster? Just wasn't sure about that part because every time I did one of these original cluster was available to just transfer immo data from it.
Anything is possible but codes should be correct, read them with couple different tools to confirm.
Car is theft recovery from an auction and a lot of parts were missing along with the key, so it's a new blank key. Could that be a problem? But I'm pretty sure with immo3 that shouldn't matter as long the pins are correct

OP says new blank key!

OP please post adaption data or immobilizer status in advanced measuring blocks......
 
Last edited:
   #11  

rrador

Verified VCDS User
Verified
Joined
Jan 28, 2019
Messages
17
Reaction score
8
Location
Canada
VCDS Serial number
C?ID=68027
Yes new blank key. Not from dealer but we cut a new key with blank transponder.
Cluster has immo status 1

Thursday,30,May,2019,17:31:53:38330
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x64
VCDS Version: 18.9.1.0 (x64)
Data version: 20190114 DS296.0
www.Ross-Tech.com


VIN: WAUAC48H34K009019 License Plate:



--------------------------------------------------------------------------------
--------------------------------------------------------------------------------


Address 17: Instruments (8H0 920 900 C)

17:31:34
30 Adaptation Channel
9 Adaptation Channel
4 Adaptation Channel
3 Adaptation Channel
40 Adaptation Channel
41 Adaptation Channel
42 Adaptation Channel
43 Adaptation Channel
44 Adaptation Channel
45 Adaptation Channel
46 Adaptation Channel
1 Immobilizer Status

--------------------------------------------------------------------------------
--------------------------------------------------------------------------------


Address 17: Instruments (8H0 920 900 C)

17:32:29
47 Adaptation Channel
48 Adaptation Channel
60 Adaptation Channel
61 Adaptation Channel
62 Adaptation Channel
18 Adaptation Channel
19 Adaptation Channel
4 Number of adapted Keys
 
   #12  

rrador

Verified VCDS User
Verified
Joined
Jan 28, 2019
Messages
17
Reaction score
8
Location
Canada
VCDS Serial number
C?ID=68027
OK all done. Was able to read pin/cs from ecu and write into cluster and new vin.
After that adapt the new key and all is good.

Thanks everyone for the help
 
Back
Top