My car has been to the Audi dealer who has correctly reset the service interval counter, this has cleared the fault. It looks like the previous dealer who serviced the car made a mistake.
Here is the final control module map.
Here is the final control module map.
Code:
;SW:8U0-920-990-A HW:8U0-920-990-A --- Instruments,,,,
;Component:KOMBI_COLOUR H14 0030, Coding:42CF00,,,
;EV_Kombi_UDS_VDD_AU10,A04391,EV_Kombi_UDS_VDD_AU10.rod,,
;Tuesday,24,February,2015,17:01:18:04481
;VCDS Version: Release 14.10.1 (x64) Data version: 20150130,,,,
;VCID: 3B7502F6B27421F97B2-806E,,,,
,,,,
Activating and deactivating all development messages,not active ,,,
Automatic door locking,Display ,,,
Day,24,,,
Day counter,1160 d,,,
Deactivate seat belt warning,No ,,,
Display correction of consumptions and operating range,100%,,,
Display correction of fuel gauge,0.0 °,,,
Display format,not active ,,,
Distance,27960 km,,,
Driving profiled for range remaining,6.4,,,
(1)-ESI: Coding of Service Interval Extension (SIE)-Oil level,Oil level evaluation ,,,
(2)-ESI: Coding of Service Interval Extension (SIE)-Oil pressure,dynamic oil pressure ,,,
(3)-ESI: Coding of Service Interval Extension (SIE)-Oil quality,good oil quality ,,,
(4)-ESI: Coding of Service Interval Extension (SIE)-TOG,Oil level thermal sensor connected to instrument cluster ,,,
ESI: distance driven from inspection,13000 km,,,
ESI: maximum value km-driving distance/inspection,30000 km,,,
ESI: maximum value of time between inspections,730 d,,,
ESI: minimum value km-driving distance/inspection,15000 km,,,
ESI: minimum value of time between inspections,730 d,,,
ESI: oil quality,good oil quality ,,,
ESI: Resetting ESI,no warning ,,,
ESI: soot entry,14700 km,,,
ESI: thermal load,7800 km,,,
ESI: time from inspection,287 d,,,
Expanded display of traffic sign detection,On ,,,
FIX: Distance covered since last mileage-dependent inspection,13000 km,,,
Fix: Max. distance until next mileage-related inspection,30500 km,,,
FIX: Maximum time until next time-dependent inspection,730 d,,,
FIX: Time since last time-dependent inspection,1 d,,,
Hour,17 H,,,
Indicator light for start-stop operation,On ,,,
Language version,English ,,,
Language version in instrument panel insert control module,English ,,,
Minute,1 min,,,
Month,2,,,
Seat belt warning,Version 4 ,,,
(1)-Service-key settings-p_write_delay_time,40 s,,,
(2)-Service-key settings-p_write_delay_speed,20 km/h,,,
(3)-Service-key settings-p_write_distance,20 km,,,
(4)-Service-key settings-p_forcewrite_qual_time,10 s,,,
(5)-Service-key settings-p_main_switch_keyless,On ,,,
(6)-Service-key settings-p_main_switch_basis,On ,,,
SIA: maximum value of distance to service,14500 km,,,
SIA: maximum value of time to service,365 d,,,
Source for synchronization of time,GPS ,,,
Speed threshold of dynamic oil pressure warning,kein Offset ,,,
(1)-Speed warning-,active ,,,
(2)-Speed warning-Unit,Miles per hour ,,,
(3)-Speed warning-Speed,80,,,
Staging,not active ,,,
Synchronization duration radio clock,0 min,,,
(1)-Units adjusted-Temperature,°C ,,,
(2)-Units adjusted-Distance,miles ,,,
(3)-Units adjusted-Speed,Miles per hour ,,,
(4)-Units adjusted-Pressure,bar ,,,
(5)-Units adjusted-Volume,gallons (UK) ,,,
(6)-Units adjusted-Time,24h ,,,
(7)-Units adjusted-Date,dd_mm_yy ,,,
(8)-Units adjusted-Consumption,Miles per gallon (UK) ,,,
Upshift display in center panel,not active ,,,
Year,2015,,,
Service_Key_Clear_All_Counters,Yes ,,,
