Page 2 of 2 FirstFirst 12
Results 11 to 13 of 13

Thread: A3 8V Control LED Power Lock doesnt Iluminate after Xenon Retrofit.

  1. #11
    Verified VCDS User
    Join Date
    May 2019
    Location
    Germany
    Posts
    13
    Post Thanks / Like
    So I do some Codings to find out where the Fault is . Without any Succes. Got Anyone an Idea?

  2. #12
    Verified VCDS User
    Join Date
    May 2019
    Location
    Germany
    Posts
    13
    Post Thanks / Like
    So it looks like the LED need a Signal from the Aft Door Locks. The Car got Safe Lock in Basic. The "New" BCM was coded with alarm my Car dont have. So what is the Coding for an A3 8V without Alarm but with Safe Lock? Where can I get some Codings from the 09 BCM?

  3. #13
    Verified VCDS User
    Join Date
    May 2019
    Location
    Germany
    Posts
    13
    Post Thanks / Like
    To bring the Post to the End. Failure has fixed. The Signal for the LED comes from the rear Door Locks. In the "new" BCM I have ticked "Save Lock" wich is an Option that the Old Car where the BCM came from desnt have.

  4. Likes Uwe liked this post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •