Error 31 Vcds during installation PDC module

   #1  

Emanuele

New Member
Joined
May 6, 2019
Messages
4
Reaction score
0
Location
Gorizia, Italy
Hello to everybody, i would install Pdc kit on my audi a3 8v sportback 2014.
Before to install the kit, i would test it.
I connected every cable, sensors adn pdc module, and then i went to code the module, but the Vcds show me this error during coding:

"this control unit appears to be without initialization.
a workshop, importer and appliance number can be requested.
- Click on | YES | to use the standard values ​​of the vcds: 12345/123/12345.
- Click on | NO | to use the values ​​currently stored in the control unit. "

At this point I click on | YES | and the vcds shows me this error: "error 31 request out of range"
So i can't to entry and coding pdc module to work in my car.

The PDC control module is : "5QD919294E"

Can anyone help me please, Thanks to everybody. Sorry for my poor English.


EMANUELE
 
   #2  

Boki Ar

VCDS Distributor
VCDS Distributor
Joined
Oct 27, 2014
Messages
2,843
Reaction score
2,710
Location
Arandjelovac, Serbia
VCDS Serial number
C?ID=57300
Hello,

better way is to enter WSC before try to initialize module, just like (or 12345/123/12345):

options-2.png


Direct link.
 
  • Like
Reactions: Uwe
   #3  

PetrolDave

Verified VCDS User
Verified
Joined
Dec 16, 2014
Messages
7,884
Reaction score
7,758
Location
Westbury, UK
VCDS Serial number
C?ID=1423
At this point I click on | YES | and the vcds shows me this error: "error 31 request out of range"
Are you 100% sure that the coding value you have is correct?

Posting an Auto-Scan will allow someone here to check the coding is correct for how your car is configured.
 
  • Like
Reactions: Uwe
   #4  

Emanuele

New Member
Joined
May 6, 2019
Messages
4
Reaction score
0
Location
Gorizia, Italy
hello PetrolDave, the coding value is 0000000000... because the PDC doesn't do put any value codes.
Thank to reply.
 
   #6  

Emanuele

New Member
Joined
May 6, 2019
Messages
4
Reaction score
0
Location
Gorizia, Italy
sorry but i can't insert the attachment of my scan. Can anyone explain me how to do? thanks.
 
   #8  

Emanuele

New Member
Joined
May 6, 2019
Messages
4
Reaction score
0
Location
Gorizia, Italy
how to upload my scan attachment? I have already the scan but i can't to upload, thanks.
 
   #9  

Viking

Verified VCDS User
Verified
Joined
Nov 2, 2015
Messages
481
Reaction score
494
Location
UK
VCDS Serial number
C?ID=151455
Simply copy and paste the text file into your post. There's no "upload" needed.
 
  • Like
Reactions: Uwe
Back
Top