Results 1 to 10 of 10

Thread: Error 31 Vcds during installation PDC module

  1. #1
    New User
    Join Date
    May 2019
    Location
    Gorizia, Italy
    Posts
    4
    Post Thanks / Like

    Error 31 Vcds during installation PDC module

    Hello to everybody, i would install Pdc kit on my audi a3 8v sportback 2014.
    Before to install the kit, i would test it.
    I connected every cable, sensors adn pdc module, and then i went to code the module, but the Vcds show me this error during coding:

    "this control unit appears to be without initialization.
    a workshop, importer and appliance number can be requested.
    - Click on | YES | to use the standard values ​​of the vcds: 12345/123/12345.
    - Click on | NO | to use the values ​​currently stored in the control unit. "

    At this point I click on | YES | and the vcds shows me this error: "error 31 request out of range"
    So i can't to entry and coding pdc module to work in my car.

    The PDC control module is : "5QD919294E"

    Can anyone help me please, Thanks to everybody. Sorry for my poor English.


    EMANUELE

  2. #2
    VCDS Distributor Boki Ar's Avatar
    Join Date
    Oct 2014
    Location
    Arandjelovac, Serbia
    Posts
    1,057
    Post Thanks / Like
    Hello,

    better way is to enter WSC before try to initialize module, just like (or 12345/123/12345):



    Direct link.

  3. Likes Uwe liked this post
  4. #3
    Verified VCDS User PetrolDave's Avatar
    Join Date
    Dec 2014
    Location
    South Molton, UK
    Posts
    1,961
    Post Thanks / Like
    Quote Originally Posted by Emanuele View Post
    At this point I click on | YES | and the vcds shows me this error: "error 31 request out of range"
    Are you 100% sure that the coding value you have is correct?

    Posting an Auto-Scan will allow someone here to check the coding is correct for how your car is configured.

  5. Likes Uwe liked this post
  6. #4
    New User
    Join Date
    May 2019
    Location
    Gorizia, Italy
    Posts
    4
    Post Thanks / Like
    hello PetrolDave, the coding value is 0000000000... because the PDC doesn't do put any value codes.
    Thank to reply.

  7. #5
    VCDS Distributor Mike@Gendan's Avatar
    Join Date
    Jun 2014
    Location
    Swansea, UK
    Posts
    346
    Post Thanks / Like
    Quote Originally Posted by Emanuele View Post
    hello PetrolDave, the coding value is 0000000000... because the PDC doesn't do put any value codes.
    Thank to reply.
    An Auto Scan would still help with context though
    Apparently I should put something witty or profound in here...

  8. Likes Uwe, PetrolDave, Emanuele liked this post
  9. #6
    New User
    Join Date
    May 2019
    Location
    Gorizia, Italy
    Posts
    4
    Post Thanks / Like
    sorry but i can't insert the attachment of my scan. Can anyone explain me how to do? thanks.

  10. #7
    VCDS Distributor Mike@Gendan's Avatar
    Join Date
    Jun 2014
    Location
    Swansea, UK
    Posts
    346
    Post Thanks / Like
    Quote Originally Posted by Emanuele View Post
    sorry but i can't insert the attachment of my scan. Can anyone explain me how to do? thanks.
    https://forums.ross-tech.com/showthread.php?101
    Apparently I should put something witty or profound in here...

  11. Likes Dana, Uwe liked this post
  12. #8
    New User
    Join Date
    May 2019
    Location
    Gorizia, Italy
    Posts
    4
    Post Thanks / Like
    how to upload my scan attachment? I have already the scan but i can't to upload, thanks.

  13. #9
    Verified VCDS User
    Join Date
    Nov 2015
    Location
    UK
    Posts
    141
    Post Thanks / Like
    Simply copy and paste the text file into your post. There's no "upload" needed.

  14. Likes Uwe liked this post
  15. #10
    Verified VCDS User PetrolDave's Avatar
    Join Date
    Dec 2014
    Location
    South Molton, UK
    Posts
    1,961
    Post Thanks / Like
    Quote Originally Posted by Emanuele View Post
    how to upload my scan attachment? I have already the scan but i can't to upload, thanks.
    See my signature for a link to a How To

  16. Likes Uwe liked this post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •