Results 1 to 6 of 6

Thread: VW Tiguan 2017 SEL Middle East - Europe Map Install

  1. #1
    Verified VCDS User
    Join Date
    Jan 2019
    Location
    Qatar
    Posts
    12
    Post Thanks / Like

    VW Tiguan 2017 SEL Middle East - Europe Map Install

    Hello guys,

    I got my car from middle east and today it just reached home to Europe, I tried to get the map download from VW website, put the uSD in the car and got a notification that there is a Map update available, then I went to Navigation and Info, then tried to update from SD Card but unfortunately I got an error that there is no map to be updated.

    Any idea how I can put the Europe maps and functionality on my car ?

    Do I need to take it to the dealer here or it can be done from VCDS ?

    Thanks In advance.

  2. #2
    Verified VCDS User
    Join Date
    May 2014
    Location
    Melbourne, Australia
    Posts
    2,602
    Post Thanks / Like
    ^^^^ It's all a bit-of-a-guess without posting an auto-scan, but assuming that a VW Tiguan 2017 SEL in the Middle East is built on MQB platform, the region part of SATNAV is determined by the software switches in Byte 3 of the module @ address hex5F.

    Again as a guess, because the forum is auto-scan blind, I assume that your (MEast) car has a code value for Byte 3 = hex 0C (Binary, 00001100) - the code for Europe should be hex 01 (Binary 00000001)

    Don
    Last edited by DV52; 05-13-2019 at 05:36 PM.
    VW Golf MkVII (MY13) - A3 8V hatch (MY17)

  3. #3
    Verified VCDS User
    Join Date
    Jan 2019
    Location
    Qatar
    Posts
    12
    Post Thanks / Like
    Quote Originally Posted by DV52 View Post
    ^^^^ It's all a bit-of-a-guess without posting an auto-scan, but assuming that a VW Tiguan 2017 SEL in the Middle East is built on MQB platform, the region part of SATNAV is determined by the software switches in Byte 3 of the module @ address hex5F.

    Again as a guess, because the forum is auto-scan blind, I assume that your (MEast) car has a code value for Byte 3 = hex 0C (Binary, 00001100) - the code for Europe should be hex 01 (Binary 00000001)

    Don
    Hi, thanks for the reply.

    Sorry for the lack of scan, I put the scan for 5F below.

    Indeed was 0C the config, I did change it to 01, then when I inserted the SD card it says that there is an update available but after a while I get same message that there is no available update . If I change the settings and then I reset the unit then once it loads the navigation it simply says that there is no available database and it locks all the menus for that so I cannot even select the info to be able to do the update from SD card. if I change but I don't restart the unit, it seems that the config is still on 0C.

    Is there a way to force the update from SD card somehow ? to override the Middle East map ? as I guess that is the issue there.

    Thanks.

    Code:
    Tuesday,14,May,2019,12:40:06:49260
    VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64
    VCDS Version: 19.4.0.0 (x64)  HEX-NET CB: 0.4504.4
    Data version: 20190411 DS307.0
    www.Ross-Tech.com
    
    
    VIN: WVGCF2AX1HW939634   License Plate: 00000
    Mileage: 24307km-15103mi   Repair Order: 
    
    
    
    --------------------------------------------------------------------------------
    --------------------------------------------------------------------------------
    
    
    Chassis Type: AX-VW37 (3Q0)
    Scan: 01 02 03 05 08 09 10 15 16 17 19 22 29 2B 36 39 42 44 4B 52
              5F 6C 6D 82 BB BC CA D6 D7
    
    VIN: WVGCF2AX1HW939634   Mileage: 24307km-15103miles
    
    -------------------------------------------------------------------------------
    Address 5F: Information Electr. (J794)       Labels:| 5G0-035-MIB-HGH2.clb
       Part No SW: 3G0 035 045 D    HW: 3G0 035 045 
       Component: MU-H-N-RW     H51 0814  
       Serial number: A688E0H2514041
       Coding: 0273060CFF00000051110001001928001F0100E401200000FF
       Shop #: WSC 01357 011 00200
       ASAM Dataset: EV_MUHig4CGen2HBAS 001001
       ROD: EV_MUHig4CGen2HBAS_VW37.rod
       VCID: 1F0EE46D067DB0B0D2-804A
    
       Operating And Display Unit 1: 
       Subsystem 1 - Part No SW: 5G0 919 606     HW: 5G0 919 606 
       Component: ABT_High  H63 0032 
       Serial number: VWZ8Z9TKL08KGA      
    
       Data medium: 
       Subsystem 2 - Part No SW: V03 959 801 BH    HW: -----------
       Component: ROW 2018/2019  --- 0071 
       Serial number: --------------------
    
       Compact Disc Database: 
       Subsystem 3 - Part No SW: V03 959 800 EG    HW: -----------
       Component: Gracenote2---  --- 4009 
       Serial number: --------------------
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Last edited by Uwe; 05-14-2019 at 10:10 AM. Reason: CODE tags

  4. #4
    Verified VCDS User
    Join Date
    May 2014
    Location
    Melbourne, Australia
    Posts
    2,602
    Post Thanks / Like
    ^^^ hmm..... we are now quickly moving beyond my pay-scale (my knowledge-base).

    I have read numerous posts on multiple forums about the problems related with folk that have sought to change the region setting. SATNAV is SWAP. However, I'm not certain whether the authorization key is specific to a particular region.

    But, there is likely someone here that may provide further intelligence on this matter - I hope

    Don

    PS: long-shot (total guess) - perhaps IDE00768-Country identification: country of sale in hex 5F module is implicated? Not sure
    Last edited by DV52; 05-14-2019 at 07:02 PM.
    VW Golf MkVII (MY13) - A3 8V hatch (MY17)

  5. Likes Uwe liked this post
  6. #5
    Verified VCDS User
    Join Date
    Nov 2016
    Location
    Poland
    Posts
    31
    Post Thanks / Like
    Quote Originally Posted by AurelianRQ View Post
    I put the scan for 5F below.
    Mine I posted long time ago:

    Code:
    -------------------------------------------------------------------------------
    Address 5F: Information Electr. (J794)       Labels: 5G0-035-MIB-STD2.clb
       Part No SW: 3Q0 035 864 B    HW: 3Q0 035 864 B
       Component: MU-S-N-ER     840 0751  
       Serial number:               
       Coding: 02730601FF0000005111000100080A001F0100E4012000008F
       Shop #: WSC 131071 1023 2097151
       ASAM Dataset: EV_MUStd4CDELP 001001
       ROD: EV_MUStd4CDELP_VW26.rod
       VCID: 306FF1796B6066C159-8064
    
       Operating And Display Unit 1: 
       Subsystem 1 - Part No SW: 5G0 919 606     HW: 5G0 919 606 
       Component: ABT_High  H63 0032 
       Serial number: VWZ8Z9SKL01SV4      
    
       Data medium: 
       Subsystem 2 - Part No SW: 3G0 919 866 AQ    HW: -----------
       Component: ECE1 2017  --- 0730 
       Serial number: --------------------
    
    No fault code found.

    My scans listing: https://forums.ross-tech.com/showthr...TSI-180KM-CZPA


    EDIT: One thing, because you mentioned SD card. When I do update of card contents, I'm just downloading bundle from VW website and replacing contents of SD card.

    I'm not selecting any option to "find updates". But it's for Discover Media, which is using SD card as a nav data storage.

    You didn't described what Navigation version you have.
    Last edited by bestyjny; 05-19-2019 at 09:40 AM.

  7. #6
    Verified VCDS User golfi_vend's Avatar
    Join Date
    Apr 2014
    Location
    Võru, Estonia
    Posts
    1,925
    Post Thanks / Like
    Supported map is determined also by FeC licence.
    I am a VW Freak - Le WV Freaks OR Come visit me at my work with ODIS concerns - FORSS ODIS GeKo/FaZit access for VW/AUDI/Škoda
    The world is my oyster...

  8. Likes DV52 liked this post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •