Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: Cannot connect to 46-Central Conv. 2013 Golf TDI

  1. #1
    Verified VCDS User Rembrant's Avatar
    Join Date
    Nov 2014
    Location
    Canada
    Posts
    310
    Post Thanks / Like

    Cannot connect to 46-Central Conv. 2013 Golf TDI

    Hi Folks,

    I haven't been on here in ages. My old 2006 Jetta was working so well my VCDS cable was collecting dust in the garage. I just bought a low mileage (17k) 2013 Golf TDI. It's one of the "fixed" ones that VW has flooded the local market with recently.

    I was trying to brush the cobwebs off my VCDS and wanted to do the first thing I always do...set the door locks to all open with one button push on the keyfob.
    I tried several times but was not able to connect to the 46-Central Conv. module. Am I doing something wrong or is there a glitch somewhere? Any advice would be appreciated.

    Autoscan is clean as a whistle.

    Code:
    Sunday,12,May,2019,18:20:02:24871
    VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64
    VCDS Version: 18.9.1.0 (x64)
    Data version: 20190114 DS296.0
    www.Ross-Tech.com
    
    
    VIN: WVWDM7AJ5DW118943   License Plate: 
    Mileage: 28290km-17578mi   Repair Order: 
    
    
    
    --------------------------------------------------------------------------------
    --------------------------------------------------------------------------------
    
    
    Chassis Type: AJ-VW36 (7N0)
    Scan: 01 02 03 08 09 15 16 17 19 25 42 44 46 52 56 62 72
    
    VIN: WVWDM7AJ5DW118943   Mileage: 28290km-17578miles
    
    01-Engine -- Status: OK 0000
    02-Auto Trans -- Status: OK 0000
    03-ABS Brakes -- Status: OK 0000
    04-Steering Angle -- Status: OK 0000
    08-Auto HVAC -- Status: OK 0000
    09-Cent. Elect. -- Status: OK 0000
    15-Airbags -- Status: OK 0000
    16-Steering wheel -- Status: OK 0000
    17-Instruments -- Status: OK 0000
    19-CAN Gateway -- Status: OK 0000
    25-Immobilizer -- Status: OK 0000
    42-Door Elect, Driver -- Status: OK 0000
    44-Steering Assist -- Status: OK 0000
    46-Central Conv. -- Status: OK 0000
    52-Door Elect, Pass. -- Status: OK 0000
    56-Radio -- Status: OK 0000
    62-Door, Rear Left -- Status: OK 0000
    72-Door, Rear Right -- Status: OK 0000
     
    -------------------------------------------------------------------------------
    Address 01: Engine (CJA)       Labels: 03L-906-022-CBE.clb
       Part No SW: 03L 997 030 E    HW: 03L 907 309 AA
       Component: R4 2.0l TDI G000AG  9983  
       Revision: 12H15---    Serial number:               
       Coding: 0350078
       Shop #: WSC 48415 001 1048576
       VCID: 306F3F97A34274CA6D-8064
    
    No fault code found.
    Readiness: 0 0 0 0 0 
    
    -------------------------------------------------------------------------------
    Address 02: Auto Trans        Labels: 02E-927-770.clb
       Part No SW: 02E 300 062 B    HW: 02E 927 770 AL
       Component: GSG DSG AG6     512 9430  
       Revision: 05651213    Serial number: 00001210290339
       Coding: 0000020
       Shop #: WSC 01357 011 00200
       VCID: 14279307371AA8EA69-8040
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 03: ABS Brakes (J104)       Labels:. 1K0-907-379-60EC1F.clb
       Part No SW: 1K0 907 379 BL    HW: 1K0 907 379 BL
       Component: ESP MK60EC1   H31 0152  
       Revision: 00H31001    
       Coding: 114B400C49230002881402E8921C0042310000
       Shop #: WSC 01357 011 00200
       VCID: 7DF1D6A3E49049A2B6-8028
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 08: Auto HVAC (J301)       Labels:| 3C8-907-336.clb
       Part No SW: 7N0 907 426 BH    HW: 7N0 907 426 BH
       Component: AC Manuell    H20 0505  
       Revision: 00001018    
       Coding: 0010004002
       Shop #: WSC 01357 011 00200
       ASAM Dataset: EV_ACManueBHBVW36X A01010
       ROD: EV_ACManueBHBVW36X_VW36.rod
       VCID: 7BF5D8BBF284479288-802E
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 09: Cent. Elect. (J519)       Labels:. 1K0-937-08x-09.clb
       Part No SW: 1K0 937 086 T    HW: 1K0 937 086 T
       Component: BCM PQ35  M   111 0717  
       Revision: AC111709    
       Coding: 6F180A1A90232AC4008000C15000854448010386524D8560648020200040
       Shop #: WSC 48415 001 1048576
       VCID: 41896A53D8E8ED4292-8014
    
       Subsystem 1 - Part No: 5K1 955 119   Labels: 1KX-955-119.CLB
       Component: Wischer 24101  26  0512 
       Coding: 009795
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 15: Airbags (J234)       Labels:| 5K0-959-655.clb
       Part No SW: 5C0 959 655 M    HW: 5C0 959 655 M
       Component: AirbagVW10G   014 0726  
       Serial number: 003L4R0119UA  
       Coding: 00004734
       Shop #: WSC 01357 011 00200
       ASAM Dataset: EV_AirbaVW10SMEVW360 001026
       ROD: EV_AirbaVW10SMEVW360.rod
       VCID: 3C771BA7B70A80AAC1-8068
    
       Crash sensor for side airbag: driver side: 
       Subsystem 1 - Part No SW: 5K0 959 354     HW: 5K0 959 354 
       Component: S.Sens.Fahr.V  H02 ---- 
       Serial number: 3572MSME54127271ZZZM
    
       Crash sensor for side airbag: front passenger side: 
       Subsystem 2 - Part No SW: 5K0 959 354     HW: 5K0 959 354 
       Component: S.Sens.Beif.V  H02 ---- 
       Serial number: 3582MSME51207271ZZZJ
    
       Crash sensor for side airbag: rear: driver side: 
       Component: S.Sens.Fahr.H  --- ---- 
       Serial number: 3512QSME7A002479ZZZU
    
       Crash sensor for side airbag: rear: passenger side: 
       Component: S.Sens.Beif.H  --- ---- 
       Serial number: 3522QSME783F1970ZZZ%
    
       Crash sensor for front airbag: driver side: 
       Component: F.Sens.Fahr  --- ---- 
       Serial number: 35527SME2207632EZZZC
    
       Crash sensor for front airbag: front passenger side: 
       Component: F.Sens.Beif  --- ---- 
       Serial number: 35627SME5709632EZZZN
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 16: Steering wheel (J527)       Labels:| 5K0-953-569.clb
       Part No SW: 5K0 953 507 AE    HW: 5K0 953 549 
       Component: Lenks.Modul   008 0090  
       Revision: --------    Serial number:  90440LK9000KV
       Coding: 5880140000
       Shop #: WSC 01357 011 00200
       ASAM Dataset: EV_SMLSNGKUDS A05001
       ROD: EV_SMLSNGKUDS_A05.rod
       VCID: 73E5F09BDAD40FD2D0-8026
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 17: Instruments (J285)       Labels:| 5K0-920-xxx-17.clb-SRI1
       Part No SW: 5K0 920 863 A    HW: 5K0 920 863 A
       Component: KOMBI         H05 0705  
       Serial number: 00000000000000
       Coding: 370F00
       Shop #: WSC 01357 011 00200
       ASAM Dataset: EV_Kombi_UDS_VDD_RM09 A04716
       ROD: EV_Kombi_UDS_VDD_RM09_004_VW32.rod
       VCID: 2D5126E37C70192246-8078
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 19: CAN Gateway (J533)       Labels:. 7N0-907-530-V2.clb
       Part No SW: 7N0 907 530 AF    HW: 7N0 907 530 AF
       Component: J533  Gateway H52 1634  
       Revision:   H52       Serial number: 121112F6000023
       Coding: 350002
       Shop #: WSC 01357 011 00200
       VCID: 74E7F387D7DA08EAC9-8020
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 25: Immobilizer (J334)       Labels:| 5K0-920-xxx-25.clb
       Part No SW: 5K0 953 234     HW: 5K0 953 234 
       Component: IMMO          H05 0705  
       Serial number: 00000000000000
       Coding: 000000
       Shop #: WSC 01357 011 00200
       ASAM Dataset: EV_Immo_UDS_VDD_RM09 A03709
       ROD: EV_Immo_UDS_VDD_RM09.rod
       VCID: 6ADBEDFF8D1ECE1A63-803E
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 42: Door Elect, Driver        Labels:. 1K0-959-701-MIN3.clb
       Part No SW: 5K0 959 701 B    HW: 5K0 959 701 B
       Component: Tuer-SG         009 2119  
       Coding: 0001204
       Shop #: WSC 01357 011 00200
       VCID: 31693A93A8487DC262-8064
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 44: Steering Assist        Labels: 1K0-909-14x-GEN3.clb
       Part No: 1K0 909 144 P
       Component: EPS_ZFLS Kl. 70     3305  
       Revision: 00H22000    
       Shop #: WSC 01357 011 00200
       VCID: 377D048B462CA3F22C-8062
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 52: Door Elect, Pass.        Labels:. 1K0-959-702-MIN3.clb
       Part No SW: 5K0 959 702 B    HW: 5K0 959 702 B
       Component: Tuer-SG         009 2119  
       Coding: 0001204
       Shop #: WSC 01357 011 00200
       VCID: 326B359FAD4E46DA1B-8066
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 56: Radio (J503)       Labels:. 5M0-035-1xx-56.clb
       Part No SW: 1K0 035 164 D    HW: 1K0 035 164 D
       Component: LOW NAR       H02 0006  
       Revision: -----06S    Serial number: VWZ4Z6M3439345
       Coding: 05000400040005
       Shop #: WSC 01357 011 00200
       VCID: 2345C0DB22B4DF52E0-8076
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 62: Door, Rear Left        Labels:. 1K0-959-703-GEN3.clb
       Part No SW: 5K0 959 703 D    HW: 5K0 959 703 D
       Component: Tuer-SG         007 2101  
       Coding: 0001168
       Shop #: WSC 01357 011 1012552
       VCID: 35610E835C2051E23E-8060
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 72: Door, Rear Right        Labels:. 1K0-959-704-GEN3.clb
       Part No SW: 5K0 959 704 D    HW: 5K0 959 704 D
       Component: Tuer-SG         007 2101  
       Coding: 0001168
       Shop #: WSC 01357 011 1012552
       VCID: 3663098F41265AFA37-8062
    
    No fault code found.
    
    End-------------------------(Elapsed Time: 02:12)--------------------------
    Late build 2006 White Jetta BRM 5spd. Mile eater.

  2. #2
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    22,934
    Post Thanks / Like
    Blog Entries
    1


    There is no 46.

    Seriously, this is an Mk.6 generation car. All the stuff that was formerly in 46 has been integrated in 09, the BCM. 46 still appears in the GVL due to compatibility and data-routing reasons, but there is nothing to for a scan tool to talk to at 46.

    -Uwe-
    The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.

  3. Likes Eric, PetrolDave liked this post
  4. #3
    Verified VCDS User Rembrant's Avatar
    Join Date
    Nov 2014
    Location
    Canada
    Posts
    310
    Post Thanks / Like
    Quote Originally Posted by Uwe View Post


    There is no 46.

    Seriously, this is an Mk.6 generation car. All the stuff that was formerly in 46 has been integrated in 09, the BCM. 46 still appears in the GVL due to compatibility and data-routing reasons, but there is nothing to for a scan tool to talk to at 46.

    -Uwe-
    Ha!...Well then, that explains why I can't connect to it then huh? lol. Thanks Ewe.

    I haven't been paying attention to anything newer than the Mk5 I was driving until I dragged this Mk6 home, so I guess I'm starting from scratch here.

    Back to the car I go!

    While I am here I want to ask...something else that is new to me with this car that I dislike is that when I turn on the cruise, a km/hr display takes over the location of my trip odometer. Is there any way to change this or do I just get used to it?
    Late build 2006 White Jetta BRM 5spd. Mile eater.

  5. #4
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    22,934
    Post Thanks / Like
    Blog Entries
    1
    Quote Originally Posted by Rembrant View Post
    Thanks Ewe.
    Sheep just got real!

    Quote Originally Posted by Rembrant View Post
    something else that is new to me with this car that I dislike is that when I turn on the cruise, a km/hr display takes over the location of my trip odometer. Is there any way to change this or do I just get used to it?
    Not any way that I am aware of.

    -Uwe-
    The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.

  6. Likes NZDubNurd, PetrolDave liked this post
  7. #5
    Verified VCDS User Rembrant's Avatar
    Join Date
    Nov 2014
    Location
    Canada
    Posts
    310
    Post Thanks / Like
    I just went out and set my door locks to all open with one push of the button on the keyfob (Now that I know where to look...lol).

    Thank you kind sir!

    I'll carry on and go burn some diesel then....

    Oh, one more question: I usually have an Ultraguage installed to watch km/hr, coolant temp, voltage, and boost. I noticed there is no OBDII output for boost on this car, is that correct or am I doing something wrong again? I searched the menu and couldn't find it. It was always there on the Mk4 cars and the one Mk5 I had. Is this gone on the Mk6? It doesn't matter really...I had just gotten used to watching it.
    Late build 2006 White Jetta BRM 5spd. Mile eater.

  8. #6
    Ross-Tech Employee Eric's Avatar
    Join Date
    Jan 2014
    Location
    Lansdale, PA, USA
    Posts
    2,721
    Post Thanks / Like
    You could post a control module map of address 0x33, so we can see which PIDs VCDS supports. I have a vague feeling/recollection it's your ultragauge being outdated. I could be wrong.
    You ain't metal till you got a clutch pedal

  9. Likes PetrolDave, Uwe liked this post
  10. #7
    Verified VCDS User Rembrant's Avatar
    Join Date
    Nov 2014
    Location
    Canada
    Posts
    310
    Post Thanks / Like
    Quote Originally Posted by Eric View Post
    You could post a control module map of address 0x33, so we can see which PIDs VCDS supports.
    Eric, not sure if I did this correctly or not...is this what you were looking for?

    Code:
    ;33-OBD2				
    ;Tuesday	14	May	2019	19:11:27:24871
    ;VCDS Version: Release 18.9.1 (x64)  Data version: 20190114 DS296.0				
    ;VCID: 306F3F97A34274CA6D-8064				
    				
    4	Calculated load value	26.30%	26.30%	
    5	Engine coolant temperature	56 C	56 C	
    0C	Engine RPM	829 /min	827 /min	
    0D	Vehicle speed	0 km/h	0 km/h	
    10	Mass Air Flow	6.72 g/s		
    13	Location of O2 sensors	B1S1 B1S2 		
    1C	OBD Requirements Met	OBD + OBD II		
    1F	Time since engine start	1041 s		
    21	Distance travelled with MIL on	0 km		
    24	Bank 1 Sensor 1 Status	0.000 Lambda	0.000 V	
    25	Bank 1 Sensor 2 Status	0.000 Lambda	0.000 V	
    30	Warm-ups since DTC cleared	11	11	
    31	Distance since DTC cleared	604 km	591 km	
    33	Barometric pressure	100 kPa abs		
    3C	B1S1 Cat. Temp.	127.5 C		
    42	Control module voltage	14.200 V	13.900 V	
    46	Ambient Air Temp	7 C		
    49	Accelerator Pedal Position D	15%	15%	
    4A	Accelerator Pedal Position E	15%		
    4C	Commanded Throttle Actuator Control	100%		
    51	Fuel type	Diesel		
    5D	Fuel Injection Timing	-3.43 		
    5E	Engine Fuel Rate	0.70 L/h		
    61	Torque Driver's Request	-9%		
    62	Torque actual	2%		
    63	Torque Reference	320 Nm		
    65	Auxiliary Input/Output	GPL_STAT:	OFF	
    67	Engine Coolant Temp	ECT 1:56 C	ECT 2:20 C	
    69	EGR Command/Actual/Error	EGR A:60/58/-2 %	EGR B:0/0/0 %	
    6B	EGR Temperature	EGRTemp 11/12:---/53 C	EGRTemp 21/22:---/--- C	
    6D	Fuel Press. Control A/B	FRP CMD:32790/--- kPa	FRP ACT:32000/--- kPa	FRTemp:---/--- C
    70	Boost Press Ctrl A/B	BP_A cmd/act:101/99 kPa		
    71	Var. Geom. Turb. Ctrl A/B	VGT_A cmd/act:100/100 %	VGT_B cmd/act:---/--- %	VGT_A:Closed Loop
    73	Exhaust Press 1/2	EP1:0.29 kPa		
    77	Charge Air Temp.	B1S1:16 C	 C	
    78	EGT Bank 1	S1/S2/S3/S4:	154/129/118/94 C	
    7A	DPF Bank 1 Delta/In/Out	0.40/---/--- kPa		
    7F	Engine Run Time	Total:26H1728s

    Code:
    			
    Mode 9 : Calibration Identification				
    Type 02 - VIN : WVWDM7AJ5DW118943 (Address E8)				
    Type 04 - Calibration ID : 03L997030E  9983 (Address E8)				
    Type 04 - Calibration ID : 02E300062B  9430 (Address E9)				
    Type 06 - Calibration Verification Number : CF33666F (Address E8)				
    Type 06 - Calibration Verification Number : 00009BB3 (Address E9)				
    Type 0A - Controller Name : ECM-EngineControl (Address E8)				
    Type 0A - Controller Name : TCM-TransmisCtrl (Address E9)				
    Type 0B - In-use performance tracking :				
        OBD Monitoring Conditions Encountered count : 23				
        Ignition cycle count : 96				
        Conditions completion count / Specified conditions encountered count				
             NMHC Catalyst : 4 / 6				
             NOx/SCR Catalyst : 0 / 0				
             NOx Adsorber : 20 / 23				
             PM Filter : 22 / 1				
             Exhaust Gas Sensor : 5 / 23				
             EGR and/or VVT : 22 / 23				
             Boost Pressure : 24 / 23				
             Fuel : 24 / 23
    Quote Originally Posted by Eric View Post
    I have a vague feeling/recollection it's your ultragauge being outdated. I could be wrong.
    That may very well be the case. I checked the Ultragauge website, and found the info below:

    "Ultragauge MX prior to v1.3 can not access multi-frame data. The Ultragauge MX v1.3 was enhanced to accept multi-frame data which allows Manufacturer proprietary data to be accessed. No all vehicles support Multi-frame data.

    This update is free with in the first year of ownership: EM Update Please place a note in the message box on the 2nd checkout page that you are upgrading to the MX 1.3"


    Looks like the update to V1.3 happened in 10/2014 and mine is an early 2014 unit (V1.2).

    Maybe I need the later version with V1.3
    Last edited by Uwe; 05-14-2019 at 07:50 PM. Reason: CODE tags
    Late build 2006 White Jetta BRM 5spd. Mile eater.

  11. Likes Eric, jyoung8607 liked this post
  12. #8
    Ross-Tech Employee Eric's Avatar
    Join Date
    Jan 2014
    Location
    Lansdale, PA, USA
    Posts
    2,721
    Post Thanks / Like
    Check out PID 0x70. I'd want to monitor 0x78 too... If the ultragauge supported it :-)
    You ain't metal till you got a clutch pedal

  13. Likes Uwe, Dana liked this post
  14. #9
    Verified VCDS User Rembrant's Avatar
    Join Date
    Nov 2014
    Location
    Canada
    Posts
    310
    Post Thanks / Like
    Quote Originally Posted by Eric View Post
    Check out PID 0x70. I'd want to monitor 0x78 too... If the ultragauge supported it :-)
    Yes, I see boost there...
    I wonder why my Ultragauge is not picking it up then....hmmm.
    I would also like to monitor the transmission fluid temp.

    I was reading some more, and my Ultraguage V1.2 is the current version for the EM series.

    The MX Version reads other things like Transmission fluid temp...if available...

    https://ultra-gauge.com/ZC/index.php...products_id=57

    Might be time for an upgrade.
    Late build 2006 White Jetta BRM 5spd. Mile eater.

  15. #10
    Verified VCDS User
    Join Date
    Oct 2014
    Location
    UK
    Posts
    164
    Post Thanks / Like
    Quote Originally Posted by Rembrant View Post
    While I am here I want to ask...something else that is new to me with this car that I dislike is that when I turn on the cruise, a km/hr display takes over the location of my trip odometer. Is there any way to change this or do I just get used to it?
    Might be worth checking the adaption channels of the instrument cluster. Feel free to post an adaption map if there is nothing obvious.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •