Results 1 to 2 of 2

Thread: KESSY - deactivation

  1. #1
    Verified VCDS User
    Join Date
    May 2018
    Post Thanks / Like

    KESSY - deactivation

    Just deactivated my passive entry/exit on my drivers and passenger doors on my Seat Ateca Xellence 2.0 TDI Alldrive using VCDS.
    Go into 05 - Acc/Start Auth
    Long Coding
    Block - OC
    Tick both boxes(Byte 0 and 1) - Passive entry door handle for driver door NOT active, and same for passenger door.
    Block - OE
    Tick both boxes(Byte 0 and 1) - Passive exit door handle for driver door NOT active, and the same for passenger door.
    Click "Do it"
    Now I can use the remote only to lock and unlock.
    Hope this helps

  2. Likes Jack@European_Parts, jyoung8607 liked this post
  3. #2
    Verified VCDS User hadez16's Avatar
    Join Date
    Jun 2017
    Post Thanks / Like
    MQB cars from MY18 onwards do support deactivating Kessy temporarily for one locking cycle.

    Lock the car using key fob and right after lock again using the door handle.
    Now you can only unlock the car using key fob.

    MLBevo MY18 (Audi A4/A5) onwards do have a menu option for that deactivation.

  4. Likes jyoung8607, Uwe, DV52 liked this post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts