Results 1 to 10 of 10

Thread: HEX-NET Issue Changing Adaptation

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Verified VCDS User
    Join Date
    Jan 2018
    Location
    USA
    Posts
    39
    Post Thanks / Like

    HEX-NET Issue Changing Adaptation

    I am getting this message when inputting 0 as a value. Note that 0 is a valid and in my case the default value from factory:



    Auto-scan and Channel 09 Admap available in the Retrofit thread I started here: https://forums.ross-tech.com/showthr...ght-Check-Bulb

    EDIT:

    I have now updated to VCDS Beta 19.4.0
    HEX-NET firmware updated to:
    CB: 04504
    FW: 0.256
    CFB: 0.10
    BL: 0.28
    DS: 60000057
    Last edited by Chimuel; 05-05-2019 at 10:06 PM. Reason: Added SW and FW Versions

  2. Likes jyoung8607 liked this post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •