Hello,
I've tried to scan a Golf Mk4 V5 with AGZ engine but it gives a redir error on the engine control module. Any idea how to fix this?
Part of the scan:
I've tried to scan a Golf Mk4 V5 with AGZ engine but it gives a redir error on the engine control module. Any idea how to fix this?
Part of the scan:
Code:
Saturday,04,May,2019,21:14:57:04650
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64
VCDS Version: 18.9.1.0 (x64)
Data version: 20190114 DS296.0
www.Ross-Tech.com
Dealer/Shop Name: *****
VIN: License Plate: ANTHONYV5
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Chassis Type: 1J - VW Golf/Bora IV (1998 > 2006)
Scan: 01 02 03 08 15 16 17 19 22 29 35 36 37 39 46 47 55 56 57 75
76
-------------------------------------------------------------------------------
Address 01: Engine Labels: Redir Fail!
Part No: 071 906 018
Component: MOTRONIC M3.8.3 HS V03
Coding: 00010
Shop #: WSC 01317
VCID: 50AF0B1790F119CA0D-4B00
4 Faults Found:
00553 - Mass Air Flow Sensor (G70)
31-10 - Open or Short to Ground - Intermittent
01165 - Throttle Body Control Module (J338)
20-00 - Malfunction in Basic Setting
17973 - Throttle Actuator (J338)
P1565 - 35-00 - Lower Stop not Reached
00282 - Throttle Position Actuator (V60)
29-00 - Short to Ground
Readiness: 0000 0001